Over time, other magicsock refactors have made Start effectively a
no-op, except that some other functions choose to panic if called
before Start.
Signed-off-by: David Anderson <danderson@tailscale.com>
We were returning an error almost, but not quite like errConnClosed in
a single codepath, which could still trip the panic on reconfig in the
test logic.
Signed-off-by: David Anderson <danderson@tailscale.com>
Our prod code doesn't eagerly handshake, because our disco layer enables
on-demand handshaking. Configuring both peers to eagerly handshake leads
to WireGuard handshake races that make TestTwoDevicePing flaky.
Signed-off-by: David Anderson <danderson@tailscale.com>
It only existed to override one test-only behavior with a
different test-only behavior, in both cases working around
an annoying feature of our CI environments. Instead, handle
that weirdness entirely in the test code, with a tweaked
TestOnlyPacketListener that gets injected.
Signed-off-by: David Anderson <danderson@tailscale.com>
The docstring said it was meant for use in tests, but it's specifically a
special codepath that is _only_ used in tests, so make the claim stronger.
Signed-off-by: David Anderson <danderson@tailscale.com>
Instead of using the legacy codepath, teach discoEndpoint to handle
peers that have a home DERP, but no disco key. We can still communicate
with them, but only over DERP.
Signed-off-by: David Anderson <danderson@tailscale.com>
magicsock makes multiple calls to Now per packet.
Move to mono.Now. Changing some of the calls to
use package mono has a cascading effect,
causing non-per-packet call sites to also switch.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
logBufWriter had no serialization.
It just so happens that none of its users currently ever log concurrently.
Make it safe for concurrent use.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The DERPTestPort int meant two things before: which port to use, and
whether to disable TLS verification. Users would like to set the port
without disabling TLS, so break it into two options.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock.Conn.ParseEndpoint requires a peer's public key,
disco key, and legacy ip/ports in order to do its job.
We currently accomplish that by:
* adding the public key in our wireguard-go fork
* encoding the disco key as magic hostname
* using a bespoke comma-separated encoding
It's a bit messy.
Instead, switch to something simpler: use a json-encoded struct
containing exactly the information we need, in the form we use it.
Our wireguard-go fork still adds the public key to the
address when it passes it to ParseEndpoint, but now the code
compensating for that is just a couple of simple, well-commented lines.
Once this commit is in, we can remove that part of the fork
and remove the compensating code.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Fields rename only.
Part of the general effort to make our code agnostic about endpoint formatting.
It's just a name, but it will soon be a misleading one; be more generic.
Do this as a separate commit because it generates a lot of whitespace changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Upstream wireguard-go renamed the interface method
from CreateEndpoint to ParseEndpoint.
I missed some comments. Fix them.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Legacy endpoints (addrSet) currently reconstruct their dst string when requested.
Instead, store the dst string we were given to begin with.
In addition to being simpler and cheaper, this makes less code
aware of how to interpret endpoint strings.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
For historical reasons, we ended up with two near-duplicate
copies of curve25519 key types, one in the wireguard-go module
(wgcfg) and one in the tailscale module (types/wgkey).
Then we moved wgcfg to the tailscale module.
We can now remove the wgcfg key type in favor of wgkey.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
One of the consequences of the bind refactoring in 6f23087175
is that attempting to bind an IPv6 socket will always
result in c.pconn6.pconn being non-nil.
If the bind fails, it'll be set to a placeholder packet conn
that blocks forever.
As a result, we can always run ReceiveIPv6 and health check it.
This removes IPv4/IPv6 asymmetry and also will allow health checks
to detect any IPv6 receive func failures.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
It must be an IP address; enforce that at the type level.
Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
We had two separate code paths for the initial UDP listener bind
and any subsequent rebinds.
IPv6 got left out of the rebind code.
Rather than duplicate it there, unify the two code paths.
Then improve the resulting code:
* Rebind had nested listen attempts to try the user-specified port first,
and then fall back to :0 if that failed. Convert that into a loop.
* Initial bind tried only the user-specified port.
Rebind tried the user-specified port and 0.
But there are actually three ports of interest:
The one the user specified, the most recent port in use, and 0.
We now try all three in order, as appropriate.
* In the extremely rare case in which binding to port 0 fails,
use a dummy net.PacketConn whose reads block until close.
This will keep the wireguard-go receive func goroutine alive.
As a pleasant side-effect of this, if we decide that
we need to resuscitate #1796, it will now be much easier.
Fixes#1799
Co-authored-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
It was set to context.Background by all callers, for the same reasons.
Set it locally instead, to simplify call sites.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
The old implementation knew too much about how wireguard-go worked.
As a result, it missed genuine problems that occurred due to unrelated bugs.
This fourth attempt to fix the health checks takes a black box approach.
A receive func is healthy if one (or both) of these conditions holds:
* It is currently running and blocked.
* It has been executed recently.
The second condition is required because receive functions
are not continuously executing. wireguard-go calls them and then
processes their results before calling them again.
There is a theoretical false positive if wireguard-go go takes
longer than one minute to process the results of a receive func execution.
If that happens, we have other problems.
Updates #1790
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
They were not doing their job.
They need yet another conceptual re-think.
Start by clearing the decks.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
The existing implementation was completely, embarrassingly conceptually broken.
We aren't able to see whether wireguard-go's receive function goroutines
are running or not. All we can do is model that based on what we have done.
This commit fixes that model.
Fixes#1781
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
