Commit Graph

700 Commits

Author SHA1 Message Date
Maisem Ali
0842e2f45b ipn/store: add ability to store data as k8s secrets.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-09-01 12:50:59 -07:00
Brad Fitzpatrick
7f29dcaac1 cmd/tailscale/cli: make up block until state Running, not just Starting
At "Starting", the DERP connection isn't yet up. After the first netmap
and DERP connect, then it transitions into "Running".

Fixes #2708

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-01 08:25:42 -07:00
Brad Fitzpatrick
7a7aa8f2b0 cmd/derper: also add port 80 timeouts
Didn't notice this one in earlier 00b3c1c042

Updates tailscale/corp#2486

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-31 21:18:36 -07:00
Brad Fitzpatrick
3c8ca4b357 client/tailscale, cmd/tailscale/cli: move version mismatch check to CLI
So people can use the package for whois checks etc without version
skew errors.

The earlier change faa891c1f2 for #1905
was a bit too aggressive.

Fixes #2757

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-31 15:27:25 -07:00
Brad Fitzpatrick
21cb0b361f safesocket: add connect retry loop to wait for tailscaled
Updates #2708

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-31 15:13:42 -07:00
Brad Fitzpatrick
00b3c1c042 cmd/derper: add missing read/write timeouts
Updates tailscale/corp#2486

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-31 10:23:53 -07:00
David Anderson
97693f2e42 wgengine/magicsock: delete legacy AddrSet endpoints.
Instead of using the legacy codepath, teach discoEndpoint to handle
peers that have a home DERP, but no disco key. We can still communicate
with them, but only over DERP.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-08-30 14:33:07 -07:00
Maisem Ali
fd4838dc57 wgengine/userspace: add support to automatically enable/disable the tailscale
protocol in BIRD, when the node is a primary subnet router as determined
by control.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-08-30 10:18:05 -07:00
Will Lachance
a35c3ba221
cmd/tailscale: fix truncated characters in web controller (#2722)
Fixes #2204

Signed-off-by: William Lachance <wlach@protonmail.com>

Co-authored-by: William Lachance <wlach@protonmail.com>
Co-authored-by: Ross Zurowski <ross@rosszurowski.com>
2021-08-27 17:10:17 -04:00
Brad Fitzpatrick
4aab083cae cmd/tailscaled: add debug flag to print interfaces just once
It previously only had a polling monitor mode.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-26 11:59:52 -07:00
Brad Fitzpatrick
47045265b9 hostinfo: add SetDeviceModel setter, move remaining code from controlclient
Updates tailscale/corp#1959

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-20 10:45:22 -07:00
Josh Bleecher Snyder
4ff0757d44 cmd/testcontrol: add test control server
This is useful for manual performance testing
of networks with many nodes.
I imagine it'll grow more knobs over time.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-19 17:50:48 -07:00
Brad Fitzpatrick
edb338f542 cmd/tailscale: fix sporadic 'context canceled' error on 'up'
Fixes #2333

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-19 08:44:39 -07:00
Maisem Ali
9f62cc665e tailscaled: try migrating old state on synology devices
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-08-18 13:45:15 -07:00
Brad Fitzpatrick
b7ae529ecc client/tailscale: make GetCertificate guess cert if SNI lacks dots
Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-18 10:08:44 -07:00
Brad Fitzpatrick
d5e1abd0c4 cmd/tailscale/cli: only write cert file if it changed
Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-18 08:19:44 -07:00
Brad Fitzpatrick
57b794c338 ipn/localapi: move cert fetching code to localapi, cache, add cert subcommand
Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-17 16:02:10 -07:00
Matt Layher
8ab44b339e net/tstun: use unix.Ifreq type for Linux TAP interface configuration
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-08-17 12:17:51 -07:00
Josh Bleecher Snyder
d2aa144dcc syncs: bump known good version to include Go 1.17
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-17 11:13:03 -07:00
Brad Fitzpatrick
25e060a841 cmd/tailscale/cli: fix cert fetch WaitOrder retry loop, misc cleanups
Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-16 14:54:41 -07:00
Brad Fitzpatrick
b2eea1ee00 cmd/tailscale/cli: make cert fetch registration automatic, show valid domains
Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-16 10:45:05 -07:00
Denton Gentry
3e7ff5ff98 cmd/tailscaled: enable hybrid netstack mode for FreeBSD.
Allows FreeBSD to function as an exit node in the same way
that Windows and Tailscaled-on-MacOS do.

RELNOTE=FreeBSD can now function as an exit node.

Fixes https://github.com/tailscale/tailscale/issues/2498

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-08-14 20:26:38 -07:00
Brad Fitzpatrick
ec9f3f4cc0 cmd/tailscale: update depaware
Missing from prior commit.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-13 08:56:29 -07:00
Brad Fitzpatrick
c68a12afe9 cmd/tailscale: add temporary debug command for getting DNS-01 LetsEncrypt cert
Not even close to usable or well integrated yet, but submitting this before
it bitrots or I lose it.

Updates #1235

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-13 08:49:49 -07:00
David Anderson
d2d55bd63c cmd/microproxy: delete.
Thank goodness.

Fixes #2635

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-08-12 14:17:42 -07:00
Josh Bleecher Snyder
a4e19f2233 version: remove rsc.io/goversion dependency
rsc.io/goversion is really expensive.
Running version.ReadExe on tailscaled on darwin
allocates 47k objects, almost 11mb.

All we want is the module info. For that, all we need to do
is scan through the binary looking for the magic start/end strings
and then grab the bytes in between them.

We can do that easily and quickly with nothing but a 64k buffer.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-09 22:46:01 -07:00
David Crawshaw
360223fccb types/dnstype: introduce new package for Resolver
So the type can be used in net/dns without introducing a tailcfg
dependency.

For #2596

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-08-06 08:54:33 -07:00
Josh Bleecher Snyder
eee6b85b9b cmd/tailscaled: don't require root for --cleanup
Without this, the integration tests fail locally for me:

--- FAIL: TestCollectPanic (7.61s)
    integration.go:74: built [tailscale.com/cmd/tailscaled tailscale.com/cmd/tailscale] in 1.59s
    integration_test.go:102: initial run: tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking)
    integration_test.go:108: cleanup failed: exit status 1: "tailscaled requires root; use sudo tailscaled (or use --tun=userspace-networking)\n"
    stuntest.go:64: STUN server shutdown
FAIL
FAIL	tailscale.com/tstest/integration	9.678s
FAIL

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-05 15:55:11 -07:00
Josh Bleecher Snyder
a5da4ed981 all: gofmt with Go 1.17
This adds "//go:build" lines and tidies up existing "// +build" lines.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-05 15:54:00 -07:00
Brad Fitzpatrick
a729070252 net/tstun: add start of Linux TAP support, with DHCP+ARP server
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.

Updates #2589

Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-05 10:01:45 -07:00
Brad Fitzpatrick
fd7b738e5b derp: use pad32 package for padding, reduce duplication
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-04 14:43:01 -07:00
Brad Fitzpatrick
fdc081c291 net/portmapper: fix UPnP probing, work against all ports
Prior to Tailscale 1.12 it detected UPnP on any port.
Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports.

Then start plumbing its discovered Location header port number to the
code that was assuming port 5000.

Fixes #2109

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-04 12:49:49 -07:00
Brad Fitzpatrick
f3c96df162 ipn/ipnstate: move tailscale status "active" determination to tailscaled
Fixes #2579

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-04 09:10:49 -07:00
Brad Fitzpatrick
1db9032ff5 cmd/tailscaled: let portmap debug mode have an gateway/IP override knob
For testing pfSense clients "behind" pfSense on Digital Ocean where
the main interface still exists. This is easier for debugging.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-03 19:34:58 -07:00
Brad Fitzpatrick
31ea073a73 cmd/tailscaled: add debug -portmap mode
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-02 22:11:51 -07:00
David Crawshaw
3e039daf95 logpolicy: actually collect panics
(Written with Josh)

For #2544

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-08-02 14:31:35 -07:00
Brad Fitzpatrick
d37451bac6 cmd/derper: dial VPC address with right context
Fix bug from just-submitted e422e9f4c9.

Updates #2414

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-29 14:29:31 -07:00
Brad Fitzpatrick
e422e9f4c9 cmd/derper: mesh over VPC network
Updates #2414

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-29 14:08:16 -07:00
Josh Bleecher Snyder
9da4181606 tstime/rate: new package
This is a simplified rate limiter geared for exactly our needs:
A fast, mono.Time-based rate limiter for use in tstun.
It was generated by stripping down the x/time/rate rate limiter
to just our needs and switching it to use mono.Time.

It removes one time.Now call per packet.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-29 12:56:58 -07:00
Josh Bleecher Snyder
8a3d52e882 wgengine/magicsock: use mono.Time
magicsock makes multiple calls to Now per packet.
Move to mono.Now. Changing some of the calls to
use package mono has a cascading effect,
causing non-per-packet call sites to also switch.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-29 12:56:58 -07:00
Josh Bleecher Snyder
c2202cc27c net/tstun: use mono.Time
There's a call to Now once per packet.
Move to mono.Now.

Though the current implementation provides high precision,
we document it to be coarse, to preserve the ability
to switch to a coarse monotonic time later.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-29 12:56:58 -07:00
Aaron Bieber
c179b9b535 cmd/tsshd: switch from github.com/kr/pty to github.com/creack/pty
The kr/pty module moved to creack/pty per the kr/pty README[1].

creack/pty brings in support for a number of OS/arch combos that
are lacking in kr/pty.

Run `go mod tidy` while here.

[1] https://github.com/kr/pty/blob/master/README.md

Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
2021-07-28 09:14:47 -07:00
Brad Fitzpatrick
7b9f02fcb1 cmd/tailscale/cli: document that empty string disable exit nodes, routes
Updates #2529

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-27 13:00:50 -07:00
Joe Tsai
d145c594ad
util/deephash: improve cycle detection (#2470)
The previous algorithm used a map of all visited pointers.
The strength of this approach is that it quickly prunes any nodes
that we have ever visited before. The detriment of the approach
is that pruning is heavily dependent on the order that pointers
were visited. This is especially relevant for hashing a map
where map entries are visited in a non-deterministic manner,
which would cause the map hash to be non-deterministic
(which defeats the point of a hash).

This new algorithm uses a stack of all visited pointers,
similar to how github.com/google/go-cmp performs cycle detection.
When we visit a pointer, we push it onto the stack, and when
we leave a pointer, we pop it from the stack.
Before visiting a pointer, we first check whether the pointer exists
anywhere in the stack. If yes, then we prune the node.
The detriment of this approach is that we may hash a node more often
than before since we do not prune as aggressively.

The set of visited pointers up until any node is only the
path of nodes up to that node and not any other pointers
that may have been visited elsewhere. This provides us
deterministic hashing regardless of visit order.
We can now delete hashMapFallback and associated complexity,
which only exists because the previous approach was non-deterministic
in the presence of cycles.

This fixes a failure of the old algorithm where obviously different
values are treated as equal because the pruning was too aggresive.
See https://github.com/tailscale/tailscale/issues/2443#issuecomment-883653534

The new algorithm is slightly slower since it prunes less aggresively:
	name              old time/op    new time/op    delta
	Hash-8              66.1µs ± 1%    68.8µs ± 1%   +4.09%        (p=0.000 n=19+19)
	HashMapAcyclic-8    63.0µs ± 1%    62.5µs ± 1%   -0.76%        (p=0.000 n=18+19)
	TailcfgNode-8       9.79µs ± 2%    9.88µs ± 1%   +0.95%        (p=0.000 n=19+17)
	HashArray-8          643ns ± 1%     653ns ± 1%   +1.64%        (p=0.000 n=19+19)
However, a slower but more correct algorithm seems
more favorable than a faster but incorrect algorithm.

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2021-07-22 15:22:48 -07:00
Brad Fitzpatrick
ed8587f90d wgengine/router: take a link monitor
Prep for #1591 which will need to make Linux's router react to changes
that the link monitor observes.

The router package already depended on the monitor package
transitively. Now it's explicit.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-20 13:43:40 -07:00
Brad Fitzpatrick
7f7a81e5ae cmd/tailscaled: add func to create ipnserver.Opts
To unify the Windows service and non-service/non-Windows paths a bit.

And provides a way to make Linux act like Windows for testing.
(notably, for testing the fix to #2137)

One perhaps visible change of this is that tailscaled.exe when run in
cmd.exe/powershell (not as a Windows Service) no longer uses the
"_daemon" autostart key. But in addition to being naturally what falls
out of this change, that's also what Windows users would likely want,
as otherwise the unattended mode user is ignored when the "_daemon"
autostart key is specified. Notably, this would let people debug what
their normally-run-as-a-service tailscaled is doing, even when they're
running in Unattended Mode.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-19 15:52:47 -07:00
Brad Fitzpatrick
87244eda3f cmd/tailscale/cli: allow effective GOOS to be changed for integration tests
Adds TS_DEBUG_UP_FLAG_GOOS for integration tests to make "tailscale
up" act like other OSes.

For an upcoming change to test #2137.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-19 15:41:35 -07:00
Josh Bleecher Snyder
4dbbd0aa4a cmd/addlicense: add command to add licenseheaders to generated code
And use it to make our stringer invocations match the existing code.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-19 15:31:56 -07:00
Brad Fitzpatrick
ec4d721572 cmd/tailscaled: use state key constant from ipn package
Rather than redefining it again.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-19 14:14:27 -07:00
Brad Fitzpatrick
e2eaae8224 cmd/derpprobe: add in a delay to wait for mesh info to sync 2021-07-19 07:52:55 -07:00
julianknodt
1bb6abc604 net/portmapper: add upnp port mapping
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.

RELNOTE=portmapper now supports UPnP mappings

Fixes #682
Updates #2109

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-07-15 15:22:12 -07:00
Aaditya Chaudhary
4f89fe17a2
Implemented Commandline Download Speedtest (#2064)
Added the net/speedtest package that contains code for starting up a
speedtest server and a client. The speedtest command for starting a
client takes in a duration for the speedtest as well as the host and
port of the speedtest server to connect to. The speedtest command for
starting a server takes in a host:port pair to listen on.

Signed-off-by: Aaditya Chaudhary <32117362+AadityaChaudhary@users.noreply.github.com>
2021-07-15 14:43:13 -04:00
julianknodt
b67a3007d5 cmd/derper: remove default for non-root users
Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-07-14 17:48:31 -07:00
julianknodt
9d4eddcef8 cmd/derper: add default -c arguments
This adds some convenient defaults for -c, so that user-provided DERPs require less command line
flags.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-07-14 17:20:56 -07:00
Brad Fitzpatrick
ee71c966fd cmd/derpprobe: bound node pair probe duration
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-14 12:05:39 -07:00
Denton Gentry
e28bc49e5f netns_linux: remove special handling for tests.
With netns handling localhost now, existing tests no longer
need special handling. The tests set up their connections to
localhost, and the connections work without fuss.

Remove the special handling for tests.

Also remove the hostinfo.TestCase support, since this was
the only use of it. It can be added back later if really
needed, but it would be better to try to make tests work
without special cases.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Denton Gentry
d2480fd508 net/netns: support !CAP_NET_ADMIN
netns_linux checked whether "ip rule" could run to determine
whether to use SO_MARK for network namespacing. However in
Linux environments which lack CAP_NET_ADMIN, such as various
container runtimes, the "ip rule" command succeeds but SO_MARK
fails due to lack of permission. SO_BINDTODEVICE would work in
these environments, but isn't tried.

In addition to running "ip rule" check directly whether SO_MARK
works or not. Among others, this allows Microsoft Azure App
Service and AWS App Runner to work.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Dan Bond
ceb8c2b34e cmd/tailscale: update web server test copyright
Signed-off-by: Dan Bond <danbond@protonmail.com>
2021-07-13 12:30:49 -07:00
Dan Bond
52972679e6 cmd/tailscale: improve web server test structure
Signed-off-by: Dan Bond <danbond@protonmail.com>
2021-07-13 12:30:49 -07:00
Dan Bond
4c684fcf8c cmd/tailscale: test web server url func
Signed-off-by: Dan Bond <danbond@protonmail.com>
2021-07-13 12:30:49 -07:00
Dan Bond
652bbc9aa0 cmd/tailscale: log web listen addr
Signed-off-by: Dan Bond <danbond@protonmail.com>
2021-07-13 12:30:49 -07:00
Brad Fitzpatrick
1cedd944cf cmd/tailscale/cli: diagnose missing tailscaled on 'up'
Fixes #2029

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-13 12:23:11 -07:00
Brad Fitzpatrick
61e8fd4698 cmd/derpprobe: move from cmd/derper/derpprobe
Because our corp build system is confused by nested
binaries.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-13 09:31:00 -07:00
Brad Fitzpatrick
05da2691a5 cmd/derper/derpprobe: add derp prober
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-13 08:30:15 -07:00
David Crawshaw
87481282eb ipn: another controlplane synonym
This one doesn't bother me so much, as long term we want a synonym here.

Fixes #2384
Fixes #2386

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-07-13 08:22:10 -07:00
David Crawshaw
c84d7baf98 cmd/tailscale/cli: factor out more up code for testing
In theory, some of the other table-driven tests could be moved into this
form now but I didn't want to disturb too much good test code.

Includes a commented-out test for #2384 that is currently failing.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-07-13 07:51:10 -07:00
Brad Fitzpatrick
92077ae78c wgengine/magicsock: make portmapping async
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-09 11:15:26 -07:00
Christine Dodrill
a19eea965f
tstest/integration/vms: use an in-process logcatcher (#2360)
This adapts the existing in-process logcatcher from tstest/integration
into a public type and uses it on the side of testcontrol. This also
fixes a bug in the Alpine Linux OpenRC unit that makes every value in
`/etc/default/tailscaled` exported into tailscaled's environment, a-la
systemd [Service].EnviromentFile.

Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-07-08 14:39:45 -04:00
Brad Fitzpatrick
a9fc583211 cmd/tailscale/cli: document the web subcommand a bit more
Fixes #2326

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-07 21:16:33 -07:00
Brad Fitzpatrick
700badd8f8 util/deephash: move internal/deephash to util/deephash
No code changes. Just a minor package doc addition about lack of API
stability.
2021-07-02 21:33:02 -07:00
Maisem Ali
ec52760a3d wgengine/router_windows: support toggling local lan access when using
exit nodes.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-06-29 09:22:10 -07:00
David Crawshaw
c37713b927 cmd/tailscale/cli: accept login server synonym
Fixes #2272

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-29 07:20:02 -07:00
julianknodt
e68d4d5805 cmd/tailscale: add debug flag to dump derp map
This adds a flag in tailscale debug for dumping the derp map to stdout.

Fixes #2249.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-28 22:50:59 -07:00
julianknodt
506c2fe8e2 cmd/tailscale: make netcheck use active DERP map, delete static copy
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.

Updates #1264

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-28 14:08:47 -07:00
Brad Fitzpatrick
3910c1edaf net/socks5/tssocks: add new package, move SOCKS5 glue out of tailscaled
Prep for #1970, #2264, #2268

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-28 11:34:50 -07:00
Brad Fitzpatrick
82e15d3450 cmd/tailscaled: log SOCKS5 port when port 0 requested
Part of #2158

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-28 08:32:50 -07:00
Brad Fitzpatrick
10d7c2583c net/dnsfallback: don't depend on derpmap.Prod
Move derpmap.Prod to a static JSON file (go:generate'd) instead,
to make its role explicit. And add a TODO about making dnsfallback
use an update-over-time DERP map file instead of a baked-in one.

Updates #1264

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-27 22:07:40 -07:00
julianknodt
148602a89a derp,cmd/derper: allow server to verify clients
This adds a flag to the DERP server which specifies to verify clients through a local
tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for
users who want to run their own DERP servers. It assumes there is a local tailscaled running and
will attempt to hit it for peer status information.

Updates #1264

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-24 14:11:16 -07:00
julianknodt
0f18801716 cmd/cloner: support maps with clone ptrs
In order to clone DERPMaps, it was necessary to extend the cloner so that it supports
nested pointers inside of maps which are also cloneable. This also adds cloning for DERPRegions
and DERPNodes because they are on DERPMap's maps.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-22 22:11:38 -07:00
Brad Fitzpatrick
38be964c2b go.mod: update netstack
Fixes a atomic alignment crash on 32-bit machines.

Fixes #2129
Fixes tailscale/tailscale-synology#66 (same)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-22 10:34:14 -07:00
Denton Gentry
ad288baaea net/interfaces: use IPv4 link local if nothing better
The only connectivity an AWS Lambda container has is an IPv4 link-local
169.254.x.x address using NAT:
12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
                    qdisc noqueue state UP group default qlen 1000
     link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1
     inet 169.254.79.1/32 scope global vtarget_1
     valid_lft forever preferred_lft forever

If there are no other IPv4/v6 addresses available, and we are running
in AWS Lambda, allow IPv4 169.254.x.x addresses to be used.

----

Similarly, a Google Cloud Run container's only connectivity is
a Unique Local Address fddf:3978:feb1:d745::c001/128.
If there are no other addresses available then allow IPv6
Unique Local Addresses to be used.
We actually did this in an earlier release, but now refactor it to
work the same way as the IPv4 link-local support is being done.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-06-18 21:52:47 -07:00
David Crawshaw
297b3d6fa4 staticcheck.conf: turn off noisy lint errors
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-18 15:48:20 -07:00
julianknodt
3728634af9 derp: add debug traffic handler
This adds a handler on the DERP server for logging bytes send and received by clients of the
server, by holding open a connection and recording if there is a difference between the number
of bytes sent and received. It sends a JSON marshalled object if there is an increase in the
number of bytes.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-18 15:47:55 -07:00
Brad Fitzpatrick
03311bb0d6 hostinfo: add hostinfo package, move stuff out of controlclient
And make it cheaper, so other parts of the code can check the
environment.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-17 14:27:01 -07:00
David Anderson
0022c3d2e2 tsweb: replace NewMux with a more flexible DebugHandler.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-16 19:00:47 -07:00
David Anderson
48c25fa36f tsweb: fold StdHandlerOpts and StdHandler200s with StdHandler.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-15 21:55:33 -07:00
David Anderson
ac07ff43bf cmd/tailscaled: start after NetworkManager and systemd-resolved.
The dependency is a "soft" ordering dependency only, meaning that
tailscaled will start after those services if those services were
going to be run anyway, but doesn't force either of them to run.
That's why it's safe to specify this dependency unconditionally,
even for systems that don't run those services.

Updates #2127.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-15 14:25:44 -07:00
Brad Fitzpatrick
80a4052593 cmd/tailscale, wgengine, tailcfg: don't assume LastSeen is present [mapver 20]
Updates #2107

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-11 08:41:16 -07:00
Christine Dodrill
8b2b899989
tstest/integration: test Alpine Linux (#2098)
Alpine Linux[1] is a minimal Linux distribution built around musl libc.
It boots very quickly, requires very little ram and is as close as you
can get to an ideal citizen for testing Tailscale on musl. Alpine has a
Tailscale package already[2], but this patch also makes it easier for us
to provide an Alpine Linux package off of pkgs in the future.

Alpine only offers Tailscale on the rolling-release edge branch.

[1]: https://alpinelinux.org/
[2]: https://pkgs.alpinelinux.org/packages?name=tailscale&branch=edge

Updates #1988

Signed-off-by: Christine Dodrill <xe@tailscale.com>
2021-06-11 09:20:13 -04:00
Maisem Ali
f944614c5c cmd/tailscale/web: add support for QNAP
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-06-10 19:06:05 +05:00
Matt Layher
6956645ec8 go.mod: bump github.com/mdlayher/netlink to v1.4.1
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-06-08 12:01:38 -07:00
David Anderson
1c6946f971 cmd/mkpkg: allow zero files in a package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-07 16:22:23 -07:00
Maisem Ali
95e296fd96 cmd/tailscale/web: restrict web access to synology admins.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-06-03 08:41:47 +05:00
Adrian Dewhurst
6d6cf88d82 control/controlclient: use our fork of certstore
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-05-28 12:12:45 -04:00
David Crawshaw
82b217f82e cmd/tailscale: have web POST wait for authURL
Fixes #1939

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-05-27 10:30:03 -07:00
David Crawshaw
50c976d3f1 cmd/tailscale: show web 'login' error message
For #1939

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-05-27 10:30:03 -07:00
Brad Fitzpatrick
d2c4e75099 cmd/tailscale/cli: update URL in error message for Synology unsupported feature
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-27 08:43:53 -07:00
Brad Fitzpatrick
cdd231cb7d cmd/tailscale/cli: don't warn about iptables=off on Synology
We don't use iptables on Synology, so don't scare the user.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-27 08:11:43 -07:00
Josh Bleecher Snyder
1ece91cede go.mod: upgrade wireguard-windows, de-fork wireguard-go
Pull in the latest version of wireguard-windows.

Switch to upstream wireguard-go.
This requires reverting all of our import paths.

Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-25 13:18:21 -07:00
Brad Fitzpatrick
a86a0361a7 go.mod: upgrade all deps
At the start of a dev cycle we'll upgrade all dependencies.

Done with:

$ for Dep in $(cat go.mod | perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-24 13:04:59 -07:00
Josh Bleecher Snyder
5666663370 net/packet: use netaddr AppendTo methods
This lets us remote the types/strbuilder package,
which had only a single user.
And it's faster.

name              old time/op    new time/op    delta
String/tcp4-8        175ns ± 0%      58ns ± 1%  -66.95%  (p=0.000 n=10+9)
String/tcp6-8        226ns ± 1%     136ns ± 1%  -39.85%  (p=0.000 n=10+10)
String/udp4-8        175ns ± 1%      58ns ± 1%  -67.01%  (p=0.000 n=10+9)
String/udp6-8        230ns ± 1%     140ns ± 0%  -39.32%  (p=0.000 n=10+9)
String/icmp4-8       164ns ± 0%      50ns ± 1%  -69.89%  (p=0.000 n=10+10)
String/icmp6-8       217ns ± 1%     129ns ± 0%  -40.46%  (p=0.000 n=10+10)
String/igmp-8        196ns ± 0%      56ns ± 1%  -71.32%  (p=0.000 n=10+10)
String/unknown-8    2.06ns ± 1%    2.06ns ± 2%     ~     (p=0.985 n=10+10)

name              old alloc/op   new alloc/op   delta
String/tcp4-8        32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/tcp6-8         168B ± 0%       96B ± 0%  -42.86%  (p=0.000 n=10+10)
String/udp4-8        32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/udp6-8         168B ± 0%       96B ± 0%  -42.86%  (p=0.000 n=10+10)
String/icmp4-8       32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/icmp6-8        104B ± 0%       64B ± 0%  -38.46%  (p=0.000 n=10+10)
String/igmp-8        48.0B ± 0%     48.0B ± 0%     ~     (all equal)
String/unknown-8     0.00B          0.00B          ~     (all equal)

name              old allocs/op  new allocs/op  delta
String/tcp4-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/tcp6-8         3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/udp4-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/udp6-8         3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/icmp4-8        1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/icmp6-8        3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/igmp-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/unknown-8      0.00           0.00          ~     (all equal)

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-20 20:42:18 -07:00
Maisem Ali
234cc87f48 cmd/tailscaled: use the wf package instead of wireguard-windows/firewall
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-05-17 13:07:25 -07:00
Josh Bleecher Snyder
25df067dd0 all: adapt to opaque netaddr types
This commit is a mishmash of automated edits using gofmt:

gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w .
gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w .

gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w .
gofmt -r 'a.IP.As16 -> a.IP().As16' -w .
gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w .
gofmt -r 'a.IP.As4 -> a.IP().As4' -w .
gofmt -r 'a.IP.String -> a.IP().String' -w .

And regexps:

\w*(.*)\.Port = (.*)  ->  $1 = $1.WithPort($2)
\w*(.*)\.IP = (.*)  ->  $1 = $1.WithIP($2)

And lots of manual fixups.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-16 14:52:00 -07:00
Josh Bleecher Snyder
6f62bbae79 cmd/tailscale: make ping --until-direct require direct connection to exit 0
If --until-direct is set, the goal is to make a direct connection.
If we failed at that, say so, and exit with an error.

RELNOTE=tailscale ping --until-direct (the default) now exits with
a non-zero exit code if no direct connection was established.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-13 15:07:19 -07:00
Brad Fitzpatrick
36a26e6a71 internal/deephash: rename from deepprint
Yes, it printed, but that was an implementation detail for hashing.

And coming optimization will make it print even less.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-11 12:11:16 -07:00
Maisem Ali
7027fa06c3 wf: implement windows firewall using inet.af/wf.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-05-10 09:57:07 -07:00
Brad Fitzpatrick
5190435d6e cmd/tailscale: rewrite the "up" checker, fix bugs
The old way was way too fragile and had felt like it had more special
cases than normal cases. (see #1874, #1860, #1834, etc) It became very
obvious the old algorithm didn't work when we made the output be
pretty and try to show the user the command they need to run in
5ecc7c7200 for #1746)

The new algorithm is to map the prefs (current and new) back to flags
and then compare flags. This nicely handles the OS-specific flags and
the n:1 and 1:n flag:pref cases.

No change in the existing already-massive test suite, except some ordering
differences (the missing items are now sorted), but some new tests are
added for behavior that was broken before. In particular, it now:

* preserves non-pref boolean flags set to false, and preserves exit
  node IPs (mapping them back from the ExitNodeID pref, as well as
  ExitNodeIP),

* doesn't ignore --advertise-exit-node when doing an EditPrefs call
  (#1880)

* doesn't lose the --operator on the non-EditPrefs paths (e.g. with
  --force-reauth, or when the backend was not in state Running).

Fixes #1880

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-07 09:31:55 -07:00
Brad Fitzpatrick
e78e26b6fb cmd/tailscale: fix another up warning with exit nodes
The --advertise-routes and --advertise-exit-node flags both mutating
one pref is the gift that keeps on giving.

I need to rewrite the this up warning code to first map prefs back to
flag values and then just compare flags instead of comparing prefs,
but this is the minimal fix for now.

This also includes work on the tests, to make them easier to write
(and more accurate), by letting you write the flag args directly and
have that parse into the upArgs/MaskedPrefs directly, the same as the
code, rather than them being possibly out of sync being written by
hand.

Fixes https://twitter.com/EXPbits/status/1390418145047887877

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-06 15:50:58 -07:00
Brad Fitzpatrick
2585edfaeb cmd/tailscale: fix tailscale up --advertise-exit-node validation
Fixes #1859

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-05 20:50:47 -07:00
Brad Fitzpatrick
52e1031428 cmd/tailscale: gofmt
From 6d10655dc3

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-04 13:04:33 -07:00
Avery Pennarun
6d10655dc3 ipnlocal: accept a new opts.UpdatePrefs field.
This is needed because the original opts.Prefs field was at some point
subverted for use in frontend->backend state migration for backward
compatibility on some platforms. We still need that feature, but we
also need the feature of providing the full set of prefs from
`tailscale up`, *not* including overwriting the prefs.Persist keys, so
we can't use the original field from `tailscale up`.

`tailscale up` had attempted to compensate for that by doing SetPrefs()
before Start(), but that violates the ipn.Backend contract, which says
you should call Start() before anything else (that's why it's called
Start()). As a result, doing SetPrefs({ControlURL=...,
WantRunning=true}) would cause a connection to the *previous* control
server (because WantRunning=true), and then connect to the *new*
control server only after running Start().

This problem may have been avoided before, but only by pure luck.

It turned out to be relatively harmless since the connection to the old
control server was immediately closed and replaced anyway, but it
created a race condition that could have caused spurious notifications
or rejected keys if the server responded quickly.

As already covered by existing TODOs, a better fix would be to have
Start() get out of the business of state migration altogether. But
we're approaching a release so I want to make the minimum possible fix.

Fixes #1840.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-05-04 15:19:25 -04:00
Josh Bleecher Snyder
7dbbe0c7c7 cmd/tailscale/cli: fix running from Xcode
We were over-eager in running tailscale in GUI mode.
f42ded7acf fixed that by
checking for a variety of shell-ish env vars and using those
to force us into CLI mode.

However, for reasons I don't understand, those shell env vars
are present when Xcode runs Tailscale.app on my machine.
(I've changed no configs, modified nothing on a brand new machine.)
Work around that by adding an additional "only in GUI mode" check.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-05-04 11:37:02 -07:00
Josh Bleecher Snyder
9360f36ebd all: use lower-case letters at the start of error message
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-05-04 08:54:50 -07:00
Brad Fitzpatrick
962bf74875 cmd/tailscale: fail if tailscaled closes the IPN connection
I was going to write a test for this using the tstest/integration test
stuff, but the testcontrol implementation isn't quite there yet (it
always registers nodes and doesn't provide AuthURLs). So, manually
tested for now.

Fixes #1843

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-04 07:51:23 -07:00
David Crawshaw
1f48d3556f cmd/tailscale/cli: don't report outdated auth URL to web UI
This brings the web 'up' logic into line with 'tailscale up'.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-05-03 11:18:58 -07:00
David Crawshaw
1336ed8d9e cmd/tailscale/cli: skip new tab on web login
It doesn't work properly.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-05-03 11:18:58 -07:00
Brad Fitzpatrick
ca65c6cbdb cmd/tailscale: make 'file cp' have better error messages on bad targets
Say when target isn't owned by current user, and when target doesn't
exist in netmap.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-03 10:33:55 -07:00
Brad Fitzpatrick
90002be6c0 cmd/tailscale: make pref-revert checks ignore OS-irrelevant prefs
This fixes #1833 in two ways:

* stop setting NoSNAT on non-Linux. It only matters on Linux and the flag
  is hidden on non-Linux, but the code was still setting it. Because of
  that, the new pref-reverting safety checks were failing when it was
  changing.

* Ignore the two Linux-only prefs changing on non-Linux.

Fixes #1833

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-03 09:37:50 -07:00
Brad Fitzpatrick
fb67d8311c cmd/tailscale: pull out, parameterize up FlagSet creation for tests
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-03 09:23:55 -07:00
Brad Fitzpatrick
f6e3240dee cmd/tailscale/cli: add test to catch ipn.Pref additions 2021-04-30 13:29:06 -07:00
Avery Pennarun
6caa02428e cmd/tailscale/cli/up: "LoggedOut" pref is implicit.
There's no need to warn that it was not provided on the command line
after doing a sequence of up; logout; up --args. If you're asking for
tailscale to be up, you always mean that you prefer LoggedOut to become
false.

Fixes #1828

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 16:15:04 -04:00
Avery Pennarun
19c3e6cc9e types/logger: rate limited: more hysteresis, better messages.
- Switch to our own simpler token bucket, since x/time/rate is missing
  necessary stuff (can't provide your own time func; can't check the
  current bucket contents) and it's overkill anyway.

- Add tests that actually include advancing time.

- Don't remove the rate limit on a message until there's enough room to
  print at least two more of them. When we do, we'll also print how
  many we dropped, as a contextual reminder that some were previously
  lost. (This is more like how the Linux kernel does it.)

- Reformat the [RATE LIMITED] messages to be shorter, and to not
  corrupt original message. Instead, we print the message, then print
  its format string.

- Use %q instead of \"%s\", for more accurate parsing later, if the
  format string contained quotes.

Fixes #1772

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-30 01:01:15 -04:00
Josh Bleecher Snyder
20e04418ff net/dns: add GOOS build tags
Fixes #1786

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-29 21:34:55 -07:00
David Anderson
72b6d98298 net/interfaces: return all Tailscale addresses from Tailscale().
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-29 12:25:47 -07:00
Josh Bleecher Snyder
3c543c103a wgengine/magicsock: unify initial bind and rebind
We had two separate code paths for the initial UDP listener bind
and any subsequent rebinds.

IPv6 got left out of the rebind code.
Rather than duplicate it there, unify the two code paths.
Then improve the resulting code:

* Rebind had nested listen attempts to try the user-specified port first,
  and then fall back to :0 if that failed. Convert that into a loop.
* Initial bind tried only the user-specified port.
  Rebind tried the user-specified port and 0.
  But there are actually three ports of interest:
  The one the user specified, the most recent port in use, and 0.
  We now try all three in order, as appropriate.
* In the extremely rare case in which binding to port 0 fails,
  use a dummy net.PacketConn whose reads block until close.
  This will keep the wireguard-go receive func goroutine alive.

As a pleasant side-effect of this, if we decide that
we need to resuscitate #1796, it will now be much easier.

Fixes #1799

Co-authored-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-28 10:39:28 -07:00
Josh Bleecher Snyder
8fb66e20a4 wgengine/magicsock: remove DefaultPort const
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-28 10:39:28 -07:00
Brad Fitzpatrick
1e6d512bf0 cmd/tailscale: improve file cp error message in macOS GUI version
Fixes tailscale/corp#1684

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-28 08:35:55 -07:00
Brad Fitzpatrick
8554694616 cmd/tailscale: add 'tailscale file get' subcommand
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-27 15:28:50 -07:00
Brad Fitzpatrick
cafa037de0 cmd/tailscale/cli: rename 'tailscale push' to 'tailscale file cp'
And reverse order, require final colon, and support multiple files.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-27 13:58:56 -07:00
Ross Zurowski
b062ac5e86
cmd/tailscale: fix typo in error message (#1807)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-04-27 10:16:08 -04:00
Brad Fitzpatrick
5ecc7c7200 cmd/tailscale: make the new 'up' errors prettier and more helpful
Fixes #1746

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-26 21:26:29 -07:00
Brad Fitzpatrick
ffe6c8e335 cmd/tailscale/cli: don't do a simple up when in state NeedsLogin
Fixes #1780

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-26 11:38:56 -07:00
David Anderson
25ce9885a2 net/dns: don't use NM+resolved for NM >=1.26.6.
NetworkManager fixed the bug that forced us to use NetworkManager
if it's programming systemd-resolved, and in the same release also
made NetworkManager ignore DNS settings provided for unmanaged
interfaces... Which breaks what we used to do. So, with versions
1.26.6 and above, we MUST NOT use NetworkManager to indirectly
program systemd-resolved, but thankfully we can talk to resolved
directly and get the right outcome.

Fixes #1788

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-23 21:13:19 -07:00
Aleksandar Pesic
7c985e4944 ipn/ipnlocal: add file sharing to windows shell
Updates: tailscale/winmin#33

Signed-off-by: Aleksandar Pesic <peske.nis@gmail.com>
2021-04-23 13:32:33 -07:00
Brad Fitzpatrick
d94ed7310b cmd/tailscale/cli: add test for already-submitted #1777
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-23 10:56:26 -07:00
David Anderson
30629c430a cmd/tailscale/cli: don't force an interactive login on --reset.
Fixes #1778

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-22 15:53:50 -07:00
David Anderson
67ba6aa9fd cmd/tailscale/cli: fix typo in ExitNodeID mapping.
Prevented turning off exit nodes.

Fixes #1777

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-22 14:55:29 -07:00
Brad Fitzpatrick
11780a4503 cmd/tailscale: only send file basename in push
Fixes #1640

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 09:33:59 -07:00
Brad Fitzpatrick
820952daba cmd/tailscale: don't print out old authURL on up --force-reauth
Fixes #1671

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-22 08:38:07 -07:00
Brad Fitzpatrick
c91a22c82e cmd/tailscale: don't print auth URL when using a --authkey
Fixes #1755

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 21:59:00 -07:00
Brad Fitzpatrick
e40e5429c2 cmd/tailscale/cli: make 'tailscale up' protect --advertise-exit-node removal
The new "tailscale up" checks previously didn't protect against
--advertise-exit-node being omitted in the case that
--advertise-routes was also provided. It wasn't done before because
there is no corresponding pref for "--advertise-exit-node"; it's a
helper flag that augments --advertise-routes. But that's an
implementation detail and we can still help users. We just have to
special case that pref and look whether the current routes include
both the v4 and v6 /0 routes.

Fixes #1767

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 21:45:30 -07:00
Brad Fitzpatrick
a16eb6ac41 cmd/tailscale/cli: show online/offline status in push --file-targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 16:06:01 -07:00
Brad Fitzpatrick
dedbd483ea cmd/tailscale/cli: don't require explicit --operator if it matches $USER
This doesn't make --operator implicit (which we might do in the
future), but it at least doesn't require repeating it in the future
when it already matches $USER.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-21 15:49:01 -07:00
Brad Fitzpatrick
91c9c33036 cmd/tailscaled: don't block ipnserver startup behind engine init on Windows
With this change, the ipnserver's safesocket.Listen (the localhost
tcp.Listen) happens right away, before any synchronous
TUN/DNS/Engine/etc setup work, which might be slow, especially on
early boot on Windows.

Because the safesocket.Listen starts up early, that means localhost
TCP dials (the safesocket.Connect from the GUI) complete successfully
and thus the GUI avoids the MessageBox error. (I verified that
pacifies it, even without a Listener.Accept; I'd feared that Windows
localhost was maybe special and avoided the normal listener backlog).

Once the GUI can then connect immediately without errors, the various
timeouts then matter less, because the backend is no longer trying to
race against the GUI's timeout. So keep retrying on errors for a
minute, or 10 minutes if the system just booted in the past 10
minutes.

This should fix the problem with Windows 10 desktops auto-logging in
and starting the Tailscale frontend which was then showing a
MessageBox error about failing to connect to tailscaled, which was
slow coming up because the Windows networking stack wasn't up
yet. Fingers crossed.

Fixes #1313 (previously #1187, etc)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 22:26:27 -07:00
Alex Brainman
7689213aaa cmd/tailscaled: add subcommands to install and remove tailscaled Windows service
This change implements Windows version of install-system-daemon and
uninstall-system-daemon subcommands. When running the commands the
user will install or remove Tailscale Windows service.

Updates #1232

Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
2021-04-20 21:40:59 -07:00
Brad Fitzpatrick
f99e63bb17 ipn: don't Logout when Windows GUI disconnects
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.

Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".

Fixes tailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 13:14:10 -07:00
Brad Fitzpatrick
f42ded7acf cmd/tailscale/cli: relax & improve the running-as-CLI check for macOS
On macOS, we link the CLI into the GUI executable so it can be included in
the Mac App Store build.

You then need to run it like:

/Applications/Tailscale.app/Contents/MacOS/Tailscale <command>

But our old detection of whether you're running that Tailscale binary
in CLI mode wasn't accurate and often bit people. For instance, when
they made a typo, it then launched in GUI mode and broke their
existing GUI connection (starting a new IPNExtension) and took down
their network.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-20 09:18:33 -07:00
Brad Fitzpatrick
8f3e453356 ipn, cmd/tailscale/cli: add pref to configure sudo-free operator user
From discussion with @danderson.

Fixes #1684 (in a different way)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-19 10:12:41 -07:00
Brad Fitzpatrick
49808ae6ea ipn{,/ipnlocal}, cmd/tailscale/cli: don't check pref reverts on initial up
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_.  That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.

An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.

So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.

Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".

Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.

And update/add tests.

Fixes #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 08:12:18 -07:00
Brad Fitzpatrick
4df6e62fbc ipn: add DefaultControlURL const, replace few literals with it
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-18 07:48:53 -07:00
Brad Fitzpatrick
f1d45bc4bb cmd/tailscale/cli: pull out prefsFromUpArgs for testability, add tests
Will add more tests later but this locks in all the existing warnings
and errors at least, and some of the existing non-error behavior.

Mostly I want this to exist before I actually fix #1725.

Updates #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-17 20:59:33 -07:00
Brad Fitzpatrick
4948ff6ecb cmd/tailscale/cli: treat nil and non-nil zero length slices as equiv prefs
Updates #1725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-17 19:17:18 -07:00
Brad Fitzpatrick
eb6115e295 cmd/tailscaled: let SOCKS5 dial non-Tailscale addrs in userspace mode
Fixes #1617

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 16:20:31 -07:00
Brad Fitzpatrick
2f422434aa cmd/tailscale/cli: wait on the right contexts in up
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 10:27:56 -07:00
Brad Fitzpatrick
6da812b4cf cmd/tailscale/cli: avoid a spammy log message on SIGINT
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-16 08:00:31 -07:00
Ross Zurowski
c748c20fba
cmd/tailscale: fix command descriptions (#1710)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-04-15 18:33:23 -04:00
Naman Sood
5ea53891fe
cmd/tailscaled: populate netstack variable to use dialer in SOCKS5
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-14 13:13:10 -04:00
Brad Fitzpatrick
75b99555f3 cmd/tailscale/cli: let ip take a peername
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 08:13:16 -07:00
Brad Fitzpatrick
762180595d ipn/ipnstate: add PeerStatus.TailscaleIPs slice, deprecate TailAddr
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-14 08:12:31 -07:00
Brad Fitzpatrick
a8d95a18b2 cmd/tailscale/cli: add up --unattended for Windows
RELNOTE=Windows CLI behavior change: ForceDaemon now off by default

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 11:40:31 -07:00
Brad Fitzpatrick
a08d978476 cmd/tailscale/cli: make push get peerapi base via localapi, not TSMP ping
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:50:16 -07:00
Brad Fitzpatrick
1dc2cf4835 cmd/tailscale/cli: add push --targets to list possible targets
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:36:14 -07:00
Brad Fitzpatrick
d17f96b586 cmd/tailscale/cli: restore SIGINT/SIGTERM on context cancel
This fixes Ctrl-C not interrupting "tailscale push".

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:34:42 -07:00
Brad Fitzpatrick
db5e269463 client/tailscale/apitype: move local API types to new apitype package
They were scattered/duplicated in misc places before.

It can't be in the client package itself for circular dep reasons.

This new package is basically tailcfg but for localhost
communications, instead of to control.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 08:13:46 -07:00
Maisem Ali
1b9d8771dc ipn/ipnlocal,wgengine/router,cmd/tailscale: add flag to allow local lan access when routing traffic via an exit node.
For #1527

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-04-12 17:29:01 -07:00
David Anderson
854d5d36a1 net/dns: return error from NewOSManager, use it to initialize NM.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-12 15:51:37 -07:00
Brad Fitzpatrick
9972c02b60 cmd/tailscale/cli: don't let up change prefs based on implicit flag values
This changes the behavior of "tailscale up".

Previously "tailscale up" always did a new Start and reset all the settings.

Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").

But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.

RELNOTE=tailscale up change

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-12 14:39:47 -07:00
Brad Fitzpatrick
00d641d9fc ipn/localapi: move EditPrefs to localapi
Follow-up/revision to recent 53cfff109b which
added EditPrefs.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 16:11:43 -07:00
David Anderson
5480189313 net/dns: implement a DNS override workaround for legacy resolvconf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 17:58:13 -07:00
Brad Fitzpatrick
958782c737 cmd/{tailscale,tailscaled}: use netstack for subnet routing on Synology
Updates #707
Fixes #451
Fixes tailscale/tailscale-synology#52 (just make it work by default)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:44:33 -07:00
Brad Fitzpatrick
3b451509dd cmd/tailscale/cli: make advertise-{routes,exit-node} available unconditionally
It was only Linux and BSDs before, but now with netstack mode, it also works on
Windows and darwin. It's not worth limiting it to certain platforms.

Tailscaled itself can complain/fail if it doesn't like the settings
for the mode/OS it's operating under.

Updates #707

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:37:24 -07:00
Brad Fitzpatrick
83402e2753 cmd/tailscale/cli: show nicer status output when logged out
Also nicer output when running "down".

Fixes #1680

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 18:25:22 -07:00
Brad Fitzpatrick
3167e55ddf ipn/{ipnlocal,localapi}, cmd/tailscale: add logout command
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-09 13:26:35 -07:00
Brad Fitzpatrick
6a7912e37a cmd/tailscale/cli: add debug mode to push slowly for testing
Also set Content-Length when known, and fail explicitly on sending
directories for now.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-08 15:01:12 -07:00
Brad Fitzpatrick
950fc28887 ipn, paths, cmd/tailscaled: remove LegacyConfigPath, relaynode migration
It is time.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 10:15:45 -07:00
Brad Fitzpatrick
50b309c1eb ipn/localapi, cmd/tailscale: add API to get prefs, CLI debug command to show
Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:28:11 -07:00
Brad Fitzpatrick
d4b609e138 cmd/tailscale/cli: fix bug in earlier tailscale debug --local-creds addition
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-07 08:01:04 -07:00
Brad Fitzpatrick
799973a68d ipn: move Options.Notify to its own method
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.

Baby steps towards some CLI refactor work.

Updates tailscale/tailscale#1436
2021-04-06 22:12:40 -07:00
Brad Fitzpatrick
d488678fdc cmd/tailscaled, wgengine{,/netstack}: add netstack hybrid mode, add to Windows
For #707

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:37:28 -07:00
Brad Fitzpatrick
1f99f889e1 ipn/{ipnlocal,localapi}: add localapi handler to dial/proxy file PUTs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-06 21:31:50 -07:00
Brad Fitzpatrick
ea9e68280d cmd/tailscale/cli: add debug command to print localapi curl command 2021-04-06 14:05:49 -07:00
David Anderson
bc4381447f net/tstun: return the real interface name at device creation.
This is usually the same as the requested interface, but on some
unixes can vary based on device number allocation, and on Windows
it's the GUID instead of the pretty name, since everything relating
to configuration wants the GUID.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 22:53:10 -07:00
David Anderson
7d84ee6c98 net/dns: unify the OS manager and internal resolver.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
David Anderson
4c61ebacf4 wgengine: move DNS configuration out of wgengine/router.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-05 10:55:35 -07:00
Josh Bleecher Snyder
b3ceca1dd7 wgengine/...: split into multiple receive functions
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.

The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.

The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.

One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.

One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-04-02 12:18:54 -07:00
David Anderson
f77ba75d6c wgengine/router: move DNS cleanup into the DNS package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 22:35:34 -07:00
Brad Fitzpatrick
39b9ab3522 cmd/tailscaled: rename isUserspace to useNetstack
The bool was already called useNetstack at the caller.
isUserspace (to mean netstack) is confusing next to wgengine.NewUserspaceEngine, as that's
a different type of 'userspace'.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-01 11:18:03 -07:00
David Anderson
90f82b6946 net/dns/resolver: add live reconfig, plumb through to ipnlocal.
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.

As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-01 01:44:03 -07:00
David Anderson
d99f5b1596 net/dns/resolver: factor the resolver out into a sub-package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-03-31 23:12:30 -07:00
Brad Fitzpatrick
53cfff109b ipn: replace SetWantRunning(bool) with EditPrefs(MaskedPrefs)
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.

Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.

Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).

Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.

In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".

Updates #1436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 22:14:11 -07:00
Maisem Ali
1c98c5f103 cmd/tailscaled: remove tailscaled binary on uninstall-system-daemon
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-03-31 15:44:04 -07:00
Maisem Ali
db13b2d0c8 cmd/tailscale, ipn/localapi: add "tailscale bugreport" subcommand
Adding a subcommand which prints and logs a log marker. This should help
diagnose any issues that users face.

Fixes #1466

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-03-31 15:19:51 -07:00
Brad Fitzpatrick
1bd14a072c cmd/tailscale, ipn/localapi: move IP forwarding check to tailscaled, API
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.

Fixes #1626

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-31 12:09:16 -07:00
David Crawshaw
ea714c6054 cmd/tailscale/cli: split out web.css file
CSS formatted with:

	npx prettier --use-tabs --write cmd/tailscale/cli/web.css

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-31 10:48:05 -07:00
Ross Zurowski
8d57bce5ef
cmd/tailscale: add initial web UI (#1621)
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
2021-03-31 11:32:33 -04:00
Brad Fitzpatrick
6d1a9017c9 ipn/{ipnlocal,localapi}, client/tailscale: add file get/delete APIs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 12:56:51 -07:00
Brad Fitzpatrick
0301ccd275 cmd/tailscale/cli: add debug --ipn mode
To watch the IPN message bus.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-30 10:43:36 -07:00
David Crawshaw
e67f1b5da0 client/tailscale, cmd/tailscale/cli: plumb --socket through
Without this, `tailscale status` ignores the --socket flag on macOS and
always talks to the IPNExtension, even if you wanted it to inspect a
userspace tailscaled.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-03-30 10:09:14 -07:00
Brad Fitzpatrick
3a1eae5b6b cmd/tailscale/cli: factor out filename selection
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 22:19:42 -07:00
Brad Fitzpatrick
1e26d4ae19 cmd/tailscale/cli: add push subcommand
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-29 22:06:57 -07:00