Per discussion, we want to have only one test assertion library,
and we want to start by exploring quicktest.
This was a mostly mechanical translation.
I think we could make this nicer by defining a few helper
closures at the beginning of the test. Later.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
This fixes#1833 in two ways:
* stop setting NoSNAT on non-Linux. It only matters on Linux and the flag
is hidden on non-Linux, but the code was still setting it. Because of
that, the new pref-reverting safety checks were failing when it was
changing.
* Ignore the two Linux-only prefs changing on non-Linux.
Fixes#1833
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to wireguard-go using printf-style logging,
all wireguard-go logging occurred using format string "%s".
We fixed that but continued to use %s when we rewrote
peer identifiers into Tailscale style.
This commit removes that %sl, which makes rate limiting work correctly.
As a happy side-benefit, it should generate less garbage.
Instead of replacing all wireguard-go peer identifiers
that might occur anywhere in a fully formatted log string,
assume that they only come from args.
Check all args for things that look like *device.Peers
and replace them with appropriately reformatted strings.
There is a variety of ways that this could go wrong
(unusual format verbs or modifiers, peer identifiers
occurring as part of a larger printed object, future API changes),
but none of them occur now, are likely to be added,
or would be hard to work around if they did.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
The "stop phrases" we use all occur in wireguard-go in the format string.
We can avoid doing a bunch of fmt.Sprintf work when they appear.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
- Switch to our own simpler token bucket, since x/time/rate is missing
necessary stuff (can't provide your own time func; can't check the
current bucket contents) and it's overkill anyway.
- Add tests that actually include advancing time.
- Don't remove the rate limit on a message until there's enough room to
print at least two more of them. When we do, we'll also print how
many we dropped, as a contextual reminder that some were previously
lost. (This is more like how the Linux kernel does it.)
- Reformat the [RATE LIMITED] messages to be shorter, and to not
corrupt original message. Instead, we print the message, then print
its format string.
- Use %q instead of \"%s\", for more accurate parsing later, if the
format string contained quotes.
Fixes#1772
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
With this change, shared node names resolve correctly on split DNS-supporting
operating systems.
Fixestailscale/corp#1706
Signed-off-by: David Anderson <danderson@tailscale.com>
Only minimal tailscale + tailscaled for now.
And a super minimal in-memory logcatcher.
No control ... yet.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Pointer receivers used with MarshalJSON are code rakes.
https://github.com/golang/go/issues/22967https://github.com/dominikh/go-tools/issues/911
I just stepped on one, and it hurt. Turn it over.
While we're here, optimize the code a bit.
name old time/op new time/op delta
MarshalJSON-8 184ns ± 0% 44ns ± 0% -76.03% (p=0.000 n=20+19)
name old alloc/op new alloc/op delta
MarshalJSON-8 184B ± 0% 80B ± 0% -56.52% (p=0.000 n=20+20)
name old allocs/op new allocs/op delta
MarshalJSON-8 4.00 ± 0% 1.00 ± 0% -75.00% (p=0.000 n=20+20)
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
For historical reasons, we ended up with two near-duplicate
copies of curve25519 key types, one in the wireguard-go module
(wgcfg) and one in the tailscale module (types/wgkey).
Then we moved wgcfg to the tailscale module.
We can now remove the wgcfg key type in favor of wgkey.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
One of the consequences of the bind refactoring in 6f23087175
is that attempting to bind an IPv6 socket will always
result in c.pconn6.pconn being non-nil.
If the bind fails, it'll be set to a placeholder packet conn
that blocks forever.
As a result, we can always run ReceiveIPv6 and health check it.
This removes IPv4/IPv6 asymmetry and also will allow health checks
to detect any IPv6 receive func failures.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
It must be an IP address; enforce that at the type level.
Suggested-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
We had two separate code paths for the initial UDP listener bind
and any subsequent rebinds.
IPv6 got left out of the rebind code.
Rather than duplicate it there, unify the two code paths.
Then improve the resulting code:
* Rebind had nested listen attempts to try the user-specified port first,
and then fall back to :0 if that failed. Convert that into a loop.
* Initial bind tried only the user-specified port.
Rebind tried the user-specified port and 0.
But there are actually three ports of interest:
The one the user specified, the most recent port in use, and 0.
We now try all three in order, as appropriate.
* In the extremely rare case in which binding to port 0 fails,
use a dummy net.PacketConn whose reads block until close.
This will keep the wireguard-go receive func goroutine alive.
As a pleasant side-effect of this, if we decide that
we need to resuscitate #1796, it will now be much easier.
Fixes#1799
Co-authored-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
It was set to context.Background by all callers, for the same reasons.
Set it locally instead, to simplify call sites.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
For when we need to tweak behavior or errors as a function of which of
3 macOS Tailscale variants we're using. (more accessors coming later
as needed)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The old implementation knew too much about how wireguard-go worked.
As a result, it missed genuine problems that occurred due to unrelated bugs.
This fourth attempt to fix the health checks takes a black box approach.
A receive func is healthy if one (or both) of these conditions holds:
* It is currently running and blocked.
* It has been executed recently.
The second condition is required because receive functions
are not continuously executing. wireguard-go calls them and then
processes their results before calling them again.
There is a theoretical false positive if wireguard-go go takes
longer than one minute to process the results of a receive func execution.
If that happens, we have other problems.
Updates #1790
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
They were not doing their job.
They need yet another conceptual re-think.
Start by clearing the decks.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
We had a long-standing bug in which our TUN events channel
was being received from simultaneously in two places.
The first is wireguard-go.
At wgengine/userspace.go:366, we pass e.tundev to wireguard-go,
which starts a goroutine (RoutineTUNEventReader)
that receives from that channel and uses events to adjust the MTU
and bring the device up/down.
At wgengine/userspace.go:374, we launch a goroutine that
receives from e.tundev, logs MTU changes, and triggers
state updates when up/down changes occur.
Events were getting delivered haphazardly between the two of them.
We don't really want wireguard-go to receive the up/down events;
we control the state of the device explicitly by calling device.Up.
And the userspace.go loop MTU logging duplicates logging that
wireguard-go does when it received MTU updates.
So this change splits the single TUN events channel into up/down
and other (aka MTU), and sends them to the parties that ought
to receive them.
I'm actually a bit surprised that this hasn't caused more visible trouble.
If a down event went to wireguard-go but the subsequent up event
went to userspace.go, we could end up with the wireguard-go device disappearing.
I believe that this may also (somewhat accidentally) be a fix for #1790.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
The intention was always that files only get written to *.partial
files and renamed at the end once fully received, but somewhere in the
process that got lost in buffered mode and *.partial files were only
being used in direct receive mode. This fix prevents WaitingFiles
from returning files that are still being transferred.
Updates tailscale/corp#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
