For debugging #6423. This is easier than TS_DEBUG_MAP, as this means I
can pipe things into jq, etc.
Updates #6423
Change-Id: Ib3e7496b2eb3f47d4bed42e9b8045a441424b23c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need for http://, etc. In case a control server sends a bogus value
and GUIs don't also validate.
Updates tailscale/corp#7948
Change-Id: I0b7dd86aa396bdabd88f0c4fe51831fb2ec4175a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct.
This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey.
It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional
to be able to delete the "/tka" dir if it exists.
This means that we will have a unique key per profile, and a unique directory per profile.
Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not
delete the ChonkDir.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The health package was turning into a rando dumping ground. Make a new
Warnable type instead that callers can request an instance of, and
then Set it locally in their code without the health package being
aware of all the things that are warnable. (For plenty of things the
health package will want to know details of how Tailscale works so it
can better prioritize/suppress errors, but lots of the warnings are
pretty leaf-y and unrelated)
This just moves two of the health warnings. Can probably move more
later.
Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This allows reusing the NoiseClient in other repos without having to reimplement the earlyPayload logic.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
* Plumb disablement values through some of the internals of TKA enablement.
* Transmit the node's TKA hash at the end of sync so the control plane understands each node's head.
* Implement /machine/tka/disable RPC to actuate disablement on the control plane.
There is a partner PR for the control server I'll send shortly.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Basic HTTP/2-over-noise client test. To be fleshed out in subsequent
commits that add more functionality to the noise client.
Updates #5972
Change-Id: I0178343523ef4ae8e8fc87bae53cbc81f4e32fde
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was just added and unreleased but we've decided to go a different route.
Details are in 5e9e57ecf5.
Updates #5972
Change-Id: I49016af469225f58535f63a9b0fbe5ab6a5bf304
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
New plan for #5972. Instead of sending the public key in the clear
(from earlier unreleased 246274b8e9) where the client might have to
worry about it being dropped or tampered with and retrying, we'll
instead send it post-Noise handshake but before the HTTP/2 connection
begins.
This replaces the earlier extraHeaders hook with a different sort of
hook that allows us to combine two writes on the wire in one packet.
Updates #5972
Change-Id: I42cdf7c1859b53ca4dfa5610bd1b840c6986e09c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.
Updates #5921
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Not currently used, but will allow us to usually remove a round-trip for
a future feature.
Updates #5972
Change-Id: I2770ea28e3e6ec9626d1cbb505a38ba51df7fba2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The node and domain audit log IDs are provided in the map response,
but are ultimately going to be used in wgengine since
that's the layer that manages the tstun.Wrapper.
Do the plumbing work to get this field passed down the stack.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Control may not be bound to (just) localhost when sharing dev servers,
allow the Wasm client to connect to it in that case too.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
SetDNS calls were broken by 6d04184325 the other day. Unreleased.
Caught by tests in another repo.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At some point we started restarting map polls on health change, but we
don't remember why. Maybe it was a desperate workaround for something.
I'm not sure it ever worked.
Rather than have a haunted graveyard, remove it.
In its place, though, and somewhat as a safety backup, send those
updates over the HTTP/2 noise channel if we have one open. Then if
there was a reason that a map poll restart would help we could do it
server-side. But mostly we can gather error stats and show
machine-level health info for debugging.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for a future change that would've been very copy/paste-y.
And because the set-dns call doesn't currently use a context,
so timeouts/cancelations are plumbed.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field
This field allows the control server to provide explicit information
about how to connect to it; useful if the client's link status can
change after the initial connection, or if the DNS settings pushed by
the control server break future connections.
Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
This turns 'dialParams' into something more like net.Dialer, where
configuration fields are public on the struct.
Split out of #5648
Change-Id: I0c56fd151dc5489c3c94fb40d18fd639e06473bc
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The data that we send over WebSockets is encrypted and thus not
compressible. Additionally, Safari has a broken implementation of compression
(see nhooyr/websocket#218) that makes enabling it actively harmful.
Fixestailscale/corp#6943
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
As noted in #5617, our documented method of blocking log.tailscale.io
DNS no longer works due to bootstrap DNS.
Instead, provide an explicit flag (--no-logs-no-support) and/or env
variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher
uploads. It also sets a bit on Hostinfo to say that the node is in that
mode so we can end any support tickets from such nodes more quickly.
This does not yet provide an easy mechanism for users on some
platforms (such as Windows, macOS, Synology) to set flags/env. On
Linux you'd used /etc/default/tailscaled typically. Making it easier
to set flags for other platforms is tracked in #5114.
Fixes#5617Fixestailscale/corp#1475
Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
4001d0bf25 caused tests in another repo to fail with a crash, calling
a nil func. This might not be the right fix, but fixes the build.
Change-Id: I67263f883c298f307abdd22bc2a30b3393f062e6
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration.
- If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now).
Signed-off-by: Tom DNetto <tom@tailscale.com>
This adds a lighter mechanism for endpoint updates from control.
Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane server doesn't send these to modern clients so we
don't need them in the tree. The server has its own serialization code
to generate legacy MapResponses when needed.
Change-Id: Idd1e5d96ddf9d4306f2da550d20b77f0c252817a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Client.SetExpirySooner isn't part of the state machine. Remove it from
the Client interface.
And fix a use of LocalBackend.cc without acquiring the lock that
guards that field.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Step 1 of many, cleaning up the direct/auto client & restarting map
requests that leads to all the unnecessary map requests.
Updates tailscale/corp#5761
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Forcing the insecure protocol (and perserving the port number) is only
desired for localhost testing, in prod we need to use wss:// to avoid
mixed-content errors.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional
communication), but we should be able to do it over WebSockets. Reuses
derp WebSocket support that allows us to turn a WebSocket connection
into a net.Conn.
Updates #3157
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Currently, when SetNetInfo is called it sets the value on
hostinfo.NetInfo. However, when SetHostInfo is called it overwrites the
hostinfo field which may mean it also clears out the NetInfo it had just
received.
This commit stores NetInfo separately and combines it into Hostinfo as
needed so that control is always notified of the latest values.
Also, remove unused copies of Hostinfo from ipn.Status and
controlclient.Auto.
Updates #tailscale/corp#4824 (maybe fixes)
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Just because we get an HTTP upgrade response over port 80, don't
assume we'll be able to do bi-di Noise over it. There might be a MITM
corp proxy or anti-virus/firewall interfering. Do a bit more work to
validate the connection before proceeding to give up on the TLS port
443 dial.
Updates #4557 (probably fixes)
Change-Id: I0e1bcc195af21ad3d360ffe79daead730dfd86f1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The connections returned from SystemDial are automatically closed when
there is a major link change.
Also plumb through the dialer to the noise client so that connections
are auto-reset when moving from cellular to WiFi etc.
Updates #3363
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In debugging #4541, I noticed this log print was always empty.
The value printed was always zero at this point.
Updates #4541
Change-Id: I0eef60c32717c293c1c853879446be65d9b2cef6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For people running self-hosted control planes who want a global
opt-out knob instead of running their own logcatcher.
Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailcfg.PingResponse formalizes the TSMP & disco response message, and
controlclient is wired to send POST responses containing
tailcfg.PingResponse for TSMP and disco PingRequests.
Updates tailscale/corp#754
Signed-off-by: James Tucker <james@tailscale.com>
Doing so makes development unpleasant, because we have to first break the
client by bumping to a version the control server rejects, then upgrade
the control server to make it accept the new version.
This strict rejection at handshake time is only necessary if we want to
blocklist some vulnerable protocol versions in the future. So, switch
to a default-permissive stance: until we have such a version that we
have to eagerly block early, we'll accept whatever version the client
presents, and leave it to the user of controlbase.Conn to make decisions
based on that version.
Noise still enforces that the client and server *agree* on what protocol
version is being used, and the control server still has the option to
finish the handshake and then hang up with an in-noise error, rather
than abort at the handshake level.
Updates #3488
Signed-off-by: David Anderson <danderson@tailscale.com>
This is so that we can plumb our client capability version through
the protocol as the Noise version. The capability version increments
more frequently than strictly required (the Noise version only needs
to change when cryptographically-significant changes are made to
the protocol, whereas the capability version also indicates changes
in non-cryptographically-significant parts of the protocol), but this
gives us a safe pre-auth way to determine if the client supports
future protocol features, while still relying on Noise's strong
assurance that the client and server have agreed on the same version.
Currently, the server executes the same protocol regardless of the
version number, and just presents the version to the caller so they
can do capability-based things in the upper RPC protocol. In future,
we may add a ratchet to disallow obsolete protocols, or vary the
Noise handshake behavior based on requested version.
Updates #3488
Signed-off-by: David Anderson <danderson@tailscale.com>
Combine the code between `LocalBackend.CheckIPForwarding` and
`controlclient.ipForwardingBroken`.
Fixes#4300
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It includes a fix to allow us to use Go 1.18.
We can now remove our Tailscale-only build tags.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The certstore code is impacted by golang/go#51726.
The Tailscale Go toolchain fork contains a temporary workaround,
so it can compile it. Once the upstream toolchain can compile certstore,
presumably in Go 1.18.1, we can revert this change.
Note that depaware runs with the upstream toolchain.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Currently `Write` returns the number of ciphertext bytes written.
According to the docs for io.Writer, Write should return the amount
of bytes consumed from the input.
```
// Write writes len(p) bytes from p to the underlying data stream.
// It returns the number of bytes written from p (0 <= n <= len(p))
// and any error encountered that caused the write to stop early.
// Write must return a non-nil error if it returns n < len(p).
// Write must not modify the slice data, even temporarily.
Write(p []byte) (n int, err error)
```
Fixes#4126
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fix regression from 21069124db caught by tests in another repo.
The HTTP/2 Transport that was being returned had a ConnPool that never
dialed.
Updates #3488
Change-Id: I3184d6393813448ae143d37ece14eb732334c05f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We want to close the connection after a minute of inactivity,
not heartbeat once a minute to keep it alive forever.
Updates #3488
Change-Id: I4b5275e8d1f2528e13de2d54808773c70537db91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add a CapabilityVersion type, primarily for documentation.
This makes MapRequest.Version, RegisterRequest.Version, and
SetDNSRequest.Version all use the same version, which will avoid
confusing in the future if Register or SetDNS ever changed their
semantics on Version change. (Currently they're both always 1)
This will requre a control server change to allow a
SetDNSRequest.Version value other than 1 to be deployed first.
Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When I deployed server-side changes, I put the upgrade handler at /ts2021
instead of /switch. We could move the server to /switch, but ts2021 seems
more specific and better, but I don't feel strongly.
Updates #3488
Change-Id: Ifbf8ea60a815fd2fa1bfbe1b7af1ac2a27218354
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise omitempty doesn't work.
This is wire-compatible with a non-pointer type, so switching
is safe, now and in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
And log it when provided in map responses.
The test uses the date on which I joined Tailscale. :)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The TODO is done. Magicsock doesn't require any endpoints to create an
*endpoint now. Verified both in code and empirically: I can use the
env knob and access everything.
Change-Id: I4fe7ed5b11c5c5e94b21ef3d77be149daeab998a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If multiple certificates match when selecting a certificate, use the one
issued the most recently (as determined by the NotBefore timestamp).
This also adds some tests for the function that performs that
comparison.
Updates tailscale/coral#6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We don't use it anyway, so be explicit that we're not using it.
Change-Id: Iec953271ef0169a2e227811932f5b65b479624af
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, the client can obtain the initial handshake message
separately from the rest of the handshake, for embedding into another
protocol. This enables things like RTT reduction by stuffing the
handshake initiation message into an HTTP header.
Similarly, the server API optionally accepts a pre-read Noise initiation
message, in addition to reading the message directly off a net.Conn.
Updates #3488
Signed-off-by: David Anderson <danderson@tailscale.com>
Fixes regression from 81cabf48ec which made
all map errors be sent to the frontend UI.
Fixes#3230
Change-Id: I7f142c801c7d15e268a24ddf901c3e6348b6729c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
It was useful early in development when disco clients were the
exception and tailscale logs were noisier than today, but now
non-disco is the exception.
Updates #2752
Signed-off-by: David Anderson <danderson@tailscale.com>
The netmaps can get really large.
Printing, processing, and uploading them is expensive.
Only print the header on an ongoing basis.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
Turns out we never reliably log the control plane URL a client connects
to. Do it here, and include the server public key, which might
inadvertently tell us something interesting some day.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
AWS Lambda uses Docker containers but does not
have the string "docker" in its /proc/1/cgroup.
Infer AWS Lambda via the environment variables
it sets.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Previously, there was no server round trip required to log out, so when
you asked ipnlocal to Logout(), it could clear the netmap immediately
and switch to NeedsLogin state.
In v1.8, we added a true Logout operation. ipn.Logout() would trigger
an async cc.StartLogout() and *also* immediately switch to NeedsLogin.
Unfortunately, some frontends would see NeedsLogin and immediately
trigger a new StartInteractiveLogin() operation, before the
controlclient auth state machine actually acted on the Logout command,
thus accidentally invalidating the entire logout operation, retaining
the netmap, and violating the user's expectations.
Instead, add a new LogoutFinished signal from controlclient
(paralleling LoginFinished) and, upon starting a logout, don't update
the ipn state machine until it's received.
Updates: #1918 (BUG-2)
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Without this, macOS would fail to display its menu state correctly if you
started it while !WantRunning. It relies on the netmap in order to show
the logged-in username.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
So the NetworkMap-from-incremental-MapResponses can be tested easily.
And because direct.go was getting too big.
No change in behavior at this point. Just movement.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And fix PeerSeenChange bug where it was ignored unless there were
other peer changes.
Updates tailscale/corp#1574
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When searching for the matching client identity, the returned
certificate chain was accidentally set to that of the last identity
returned by the certificate store instead of the one corresponding to
the selected identity.
Also, add some extra error checking for invalid certificate chains, just
in case.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
