In 2f27319baf we disabled GRO due to a
data race around concurrent calls to tstun.Wrapper.Write(). This commit
refactors GRO to be thread-safe, and re-enables it on Linux.
This refactor now carries a GRO type across tstun and netstack APIs
with a lifetime that is scoped to a single tstun.Wrapper.Write() call.
In 25f0a3fc8f we used build tags to
prevent importation of gVisor's GRO package on iOS as at the time we
believed it was contributing to additional memory usage on that
platform. It wasn't, so this commit simplifies and removes those
build tags.
Updates tailscale/corp#22353
Updates tailscale/corp#22125
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Coder has just adopted nhooyr/websocket which unfortunately changes the import path.
`github.com/coder/coder` imports `tailscale.com/net/wsconn` which was still pointing
to `nhooyr.io/websocket`, but this change updates it.
See https://coder.com/blog/websocket
Updates #13154
Change-Id: I3dec6512472b14eae337ae22c5bcc1e3758888d5
Signed-off-by: Kyle Carberry <kyle@carberry.com>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit implements TCP GRO for packets being written to gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported IP checksum functions.
gVisor is updated in order to make use of newly exported
stack.PacketBuffer GRO logic.
TCP throughput towards gVisor, i.e. TUN write direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement, sometimes as high as 2x. High bandwidth-delay product
paths remain receive window limited, bottlenecked by gVisor's default
TCP receive socket buffer size. This will be addressed in a follow-on
commit.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver
The second result is from this commit with TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit implements TCP GSO for packets being read from gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported GSO logic from its tun
package.
A new gVisor stack.LinkEndpoint implementation has been established
(linkEndpoint) that is loosely modeled after its predecessor
(channel.Endpoint). This new implementation supports GSO of monster TCP
segments up to 64K in size, whereas channel.Endpoint only supports up to
32K. linkEndpoint will also be required for GRO, which will be
implemented in a follow-on commit.
TCP throughput from gVisor, i.e. TUN read direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement through a wide range of RTT and loss conditions, sometimes
as high as 5x.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender
[ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver
The second result is from this commit with TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
fixes tailscale#12968
The dns manager cleanup func was getting passed a nil
health tracker, which will panic. Fixed to pass it
the system health tracker.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality
Refactor SSH session recording functionality (mostly the bits related to
Kubernetes API server proxy 'kubectl exec' session recording):
- move the session recording bits used by both Tailscale SSH
and the Kubernetes API server proxy into a shared sessionrecording package,
to avoid having the operator to import ssh/tailssh
- move the Kubernetes API server proxy session recording functionality
into a k8s-operator/sessionrecording package, add some abstractions
in preparation for adding support for a second streaming protocol (WebSockets)
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This adds a package with GP-related functions and types to be used in the future PRs.
It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This is implemented via GetBestInterfaceEx. Should we encounter errors
or fail to resolve a valid, non-Tailscale interface, we fall back to
returning the index for the default interface instead.
Fixes#12551
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This actually performs a Noise request in the 'debug ts2021' command,
instead of just exiting once we've dialed a connection. This can help
debug certain forms of captive portals and deep packet inspection that
will allow a connection, but will RST the connection when trying to send
data on the post-upgraded TCP connection.
Updates #1634
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1e46ca9c9a0751c55f16373a6a76cdc24fec1f18
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers
associated with all network adapters, even when "Override local DNS" is enabled and/or
a Mullvad exit node is being used, resulting in DNS leaks.
This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable
the new behavior if needed.
Fixestailscale/corp#20718
Signed-off-by: Nick Khyl <nickk@tailscale.com>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
When we're starting child processes on Windows that are CLI programs that
don't need to output to a console, we should pass in DETACHED_PROCESS as a
CreationFlag on SysProcAttr. This prevents the OS from even creating a console
for the child (and paying the associated time/space penalty for new conhost
processes). This is more efficient than letting the OS create the console
window and then subsequently trying to hide it, which we were doing at a few
callsites.
Fixes#12270
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This adds a new ListenPacket function on tsnet.Server
which acts mostly like `net.ListenPacket`.
Unlike `Server.Listen`, this requires listening on a
specific IP and does not automatically listen on both
V4 and V6 addresses of the Server when the IP is unspecified.
To test this, it also adds UDP support to tsdial.Dialer.UserDial
and plumbs it through the localapi. Then an associated test
to make sure the UDP functionality works from both sides.
Updates #12182
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fixestailscale/tailscale#10393Fixestailscale/corp#15412Fixestailscale/corp#19808
On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using.
Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
There was a small window in ipnserver after we assigned a LocalBackend
to the ipnserver's atomic but before we Start'ed it where our
initalization Start could conflict with API calls from the LocalAPI.
Simplify that a bit and lay out the rules in the docs.
Updates #12028
Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Some editions of Windows server share the same build number as their
client counterpart; we must use an additional field found in the OS
version information to distinguish between them.
Even though "Distro" has Linux connotations, it is the most appropriate
hostinfo field. What is Windows Server if not an alternate distribution
of Windows? This PR populates Distro with "Server" when applicable.
Fixes#11785
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
At least in userspace-networking mode.
Fixes#11361
Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Changes made:
* Avoid "encoding/json" for JSON processing, and instead use
"github.com/go-json-experiment/json/jsontext".
Use jsontext.Value.IsValid for validation, which is much faster.
Use jsontext.AppendQuote instead of our own JSON escaping.
* In drainPending, use a different maxLen depending on lowMem.
In lowMem mode, it is better to perform multiple uploads
than it is to construct a large body that OOMs the process.
* In drainPending, if an error is encountered draining,
construct an error message in the logtail JSON format
rather than something that is invalid JSON.
* In appendTextOrJSONLocked, use jsontext.Decoder to check
whether the input is a valid JSON object. This is faster than
the previous approach of unmarshaling into map[string]any and
then re-marshaling that data structure.
This is especially beneficial for network flow logging,
which produces relatively large JSON objects.
* In appendTextOrJSONLocked, enforce maxSize on the input.
If too large, then we may end up in a situation where the logs
can never be uploaded because it exceeds the maximum body size
that the Tailscale logs service accepts.
* Use "tailscale.com/util/truncate" to properly truncate a string
on valid UTF-8 boundaries.
* In general, remove unnecessary spaces in JSON output.
Performance:
name old time/op new time/op delta
WriteText 776ns ± 2% 596ns ± 1% -23.24% (p=0.000 n=10+10)
WriteJSON 110µs ± 0% 9µs ± 0% -91.77% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
WriteText 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
WriteJSON 37.9kB ± 0% 0.0kB ± 0% -99.87% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
WriteText 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
WriteJSON 1.08k ± 0% 0.00k ± 0% -99.91% (p=0.000 n=10+10)
For text payloads, this is 1.30x faster.
For JSON payloads, this is 12.2x faster.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This allows sending multiple files via Taildrop in one request.
Progress is tracked via ipn.Notify.
Updates tailscale/corp#18202
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This implementation uses less memory than tempfork/device,
which helps avoid OOM conditions in the iOS VPN extension when
switching to a Tailnet with ExitNode routing enabled.
Updates tailscale/corp#18514
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
