Now that tsdial.Dialer.UserDial has been updated to honor the configured routes
and dial external network addresses without going through Tailscale, while also being
able to dial a node/subnet router on the tailnet, we can start using UserDial to forward
DNS requests. This is primarily needed for DNS over TCP when forwarding requests
to internal DNS servers, but we also update getKnownDoHClientForProvider to use it.
Updates tailscale/corp#18725
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This refactors the peerConfig struct to allow storing more
details about a peer and not just the masq addresses. To be
used in a follow up change.
As a side effect, this also makes the DNAT logic on the inbound
packet stricter. Previously it would only match against the packets
dst IP, not it also takes the src IP into consideration. The beahvior
is at parity with the SNAT case.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5f40802bebbf0f055436eb8824e4511d0052772d
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
While debugging a failing test in airplane mode on macOS, I noticed
netcheck logspam about ICMP socket creation permission denied errors.
Apparently macOS just can't do those, or at least not in airplane
mode. Not worth spamming about.
Updates #cleanup
Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To aid in debugging exactly what's going wrong, instead of the
not-particularly-useful "dns udp query: context deadline exceeded" error
that we currently get.
Updates #3786
Updates #10768
Updates #11620
(etc.)
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76334bf0681a8a2c72c90700f636c4174931432c
So that we can use this for additional, non-NAT configuration without it
being confusing.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f
This was a holdover from the older, pre-BART days and is no longer
necessary.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8
Updates tailscale/corp#18960
Tests in corp called us using the wrong logging calls. Removed.
This is logged downstream anyway.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Updates tailscale/corp#18960
iOS uses Apple's NetworkMonitor to track the default interface and
there's no reason we shouldn't also use this on macOS, for the same
reasons noted in the comments for why this change was made on iOS.
This eliminates the need to load and parse the routing table when
querying the defaultRouter() in almost all cases.
A slight modification here (on both platforms) to fallback to the default
BSD logic in the unhappy-path rather than making assumptions that
may not hold. If netmon is eventually parsing AF_ROUTE and able
to give a consistently correct answer for the default interface index,
we can fall back to that and eliminate the Swift dependency.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Certain device drivers (e.g. vxlan, geneve) do not properly handle
coalesced UDP packets later in the stack, resulting in packet loss.
Updates #11026
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm working on moving all network state queries to be on
netmon.Monitor, removing old APIs.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: If0de137e0e2e145520f69e258597fb89cf39a2a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If this happens, it results in us pessimistically closing more
connections than might be necessary, but is more correct since we won't
"miss" a change to the default route interface and keep trying to send
data over a nonexistent interface, or one that can't reach the internet.
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia0b8b04cb8cdcb0da0155fd08751c9dccba62c1a
-Move Android impl into interfaces_android.go
-Instead of using ip route to get the interface name, use the one passed in by Android (ip route is restricted in Android 13+ per termux/termux-app#2993)
Follow-up will be to do the same for router
Fixestailscale/corp#19215Fixestailscale/corp#19124
Signed-off-by: kari-ts <kari@tailscale.com>
This ensures that we close the underlying connection(s) when a major
link change happens. If we don't do this, on mobile platforms switching
between WiFi and cellular can result in leftover connections in the
http.Client's connection pool which are bound to the "wrong" interface.
Updates #10821
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibd51ce2efcaf4bd68e14f6fdeded61d4e99f9a01
This wasn't previously handling the case where an interface in s2 was
removed and not present in s1, and would cause the Equal method to
incorrectly return that the states were equal.
Updates tailscale/corp#19124
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I3af22bc631015d1ddd0a1d01bfdf312161b9532d
It should've been deleted in 11ece02f52.
Updates #9040
Change-Id: If8a136bdb6c82804af658c9d2b0a8c63ce02d509
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At least in userspace-networking mode.
Fixes#11361
Change-Id: I78d33f0f7e05fe9e9ee95b97c99b593f8fe498f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were being too aggressive when deciding whether to write our NRPT rules
to the local registry key or the group policy registry key.
After once again reviewing the document which calls itself a spec
(see issue), it is clear that the presence of the DnsPolicyConfig subkey
is the important part, not the presence of values set in the DNSClient
subkey. Furthermore, a footnote indicates that the presence of
DnsPolicyConfig in the GPO key will always override its counterpart in
the local key. The implication of this is important: we may unconditionally
write our NRPT rules to the local key. We copy our rules to the policy
key only when it contains NRPT rules belonging to somebody other than us.
Fixes https://github.com/tailscale/corp/issues/19071
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
At least in the case of dialing a Tailscale IP.
Updates #4529
Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #7946
[@bradfitz fixed up version of #8417]
Change-Id: I1dbf6fa8d525b25c0d7ad5c559a7f937c3cd142a
Signed-off-by: alexelisenko <39712468+alexelisenko@users.noreply.github.com>
Signed-off-by: Alex Paguis <alex@windscribe.com>
The netcheck package and the magicksock package coordinate via the
health package, but both sides have time based heuristics through
indirect dependencies. These were misaligned, so the implemented
heuristic aimed at reducing DERP moves while there is active traffic
were non-operational about 3/5ths of the time.
It is problematic to setup a good test for this integration presently,
so instead I added comment breadcrumbs along with the initial fix.
Updates #8603
Signed-off-by: James Tucker <james@tailscale.com>
We now allow some more ICMP errors to flow, specifically:
- ICMP parameter problem in both IPv4 and IPv6 (corrupt headers)
- ICMP Packet Too Big (for IPv6 PMTU)
Updates #311
Updates #8102
Updates #11002
Signed-off-by: James Tucker <james@tailscale.com>
This implementation uses less memory than tempfork/device,
which helps avoid OOM conditions in the iOS VPN extension when
switching to a Tailnet with ExitNode routing enabled.
Updates tailscale/corp#18514
Signed-off-by: Percy Wegmann <percy@tailscale.com>
I was running all tests while preparing a recent stable release, and
this was failing because my computer is connected to a fairly large
tailnet.
```
--- FAIL: TestGetRouteTable (0.01s)
routetable_linux_test.go:32: expected at least one default route;
...
```
```
$ ip route show table 52 | wc -l
1051
```
Updates #cleanup
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This test could hang because the subprocess was blocked on writing to
the stdout pipe if we find the address we're looking for early in the
output.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I68d82c22a5d782098187ae6d8577e43063b72573
The `stack.PacketBufferPtr` type no longer exists; replace it with
`*stack.PacketBuffer` instead.
Updates #8043
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683
When reverse path filtering is in strict mode on Linux, using an exit
node blocks all network connectivity. This change adds a warning about
this to `tailscale status` and the logs.
Example in `tailscale status`:
```
- not connected to home DERP region 22
- The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Example in the logs:
```
2024/02/21 21:17:07 health("overall"): error: multiple errors:
not in map poll
The following issues on your machine will likely make usage of exit nodes impossible: [interface "eth0" has strict reverse-path filtering enabled], please set rp_filter=2 instead of rp_filter=1; see https://github.com/tailscale/tailscale/issues/3310
```
Updates #3310
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed.
wireguard-go closes the device in case of a read error, but tailscaled keeps running.
This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled.
It is then restarted by the tailscaled watchdog service process.
Fixes#11222
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The WinTun adapter may have been removed by the time we're closing
the dns.windowsManager, and its associated interface registry key might
also have been deleted. We shouldn't use winutil.OpenKeyWait and wait
for the interface key to appear when performing a cleanup as a part of
the windowsManager shutdown.
Updates #11222
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If a client socket is remotely lost but the client is not sent an RST in
response to the next request, the socket might sit in RTO for extended
lengths of time, resulting in "no internet" for users. Instead, timeout
after 10s, which will close the underlying socket, recovering from the
situation more promptly.
Updates #10967
Signed-off-by: James Tucker <james@tailscale.com>
