Use the `qpkg_cli` to check for updates and install them. There are a
couple special things about this compare to other updaters:
* qpkg_cli can tell you when upgrade is available, but not what the
version is
* qpkg_cli --add Tailscale works for new installs, upgrades and
reinstalling existing version; even reinstall of existing version
takes a while
Updates #10178
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Some conditional paths may otherwise skip the hostinfo update, so kick
it off asynchronously as other code paths do.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
On unix systems, the check involves executing sudo, which is slow.
Instead of doing it for every incoming request, move the logic into
localapi serveServeConfig handler and do it as needed.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The local web client has the same characteristic as tailscale serve, in
that it needs a local listener to allow for connections from the local
machine itself when running in kernel networking mode.
This change renames and adapts the existing serveListener to allow it to
be used by the web client as well.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
The c2n part was broken because we were not looking up the tailscale
binary for that GOOS. The rest of the update was failing at the `pkg
upgrade` confirmation prompt. We also need to manually restart
tailscaled after update.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
As part of tailnet-lock netmap processing, the LocalBackend mutex
is unlocked so we can potentially make a network call. Its possible
(during shutdown or while the control client is being reset) for
b.cc to become nil before the lock is picked up again.
Fixes: #9554
Signed-off-by: Tom DNetto <tom@tailscale.com>
App connectors handle DNS requests for app domains over PeerAPI,
but a safety check verifies the requesting peer has at least permission
to send traffic to 0.0.0.0:53 (or 2000:: for IPv6) before handling the DNS
request. The correct filter rules are synthesized by the coordination server
and sent down, but the address needs to be part of the 'local net' for the
filter package to even bother checking the filter rules, so we set them here.
See: https://github.com/tailscale/corp/issues/11961 for more information.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates: ENG-2405
This change introduces a c2n endpoint that returns a map of domains to a
slice of resolved IP addresses for the domain.
Fixestailscale/corp#15657
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
For an operator user, require them to be able to `sudo tailscale` to use
`tailscale serve`. This is similar to the Windows elevated token check.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Require that requests to servers in manage mode are made to the
Tailscale IP (either ipv4 or ipv6) or quad-100. Also set various
security headers on those responses. These might be too restrictive,
but we can relax them as needed.
Allow requests to /ok (even in manage mode) with no checks. This will be
used for the connectivity check from a login client to see if the
management client is reachable.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
(*Token).IsAdministrator is supposed to return true even when the user is
running with a UAC limited token. The idea is that, for the purposes of
this check, we don't care whether the user is *currently* running with
full Admin rights, we just want to know whether the user can
*potentially* do so.
We accomplish this by querying for the token's "linked token," which
should be the fully-elevated variant, and checking its group memberships.
We also switch ipn/ipnserver/(*Server).connIsLocalAdmin to use the elevation
check to preserve those semantics for tailscale serve; I want the
IsAdministrator check to be used for less sensitive things like toggling
auto-update on and off.
Fixes#10036
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
if the user pref and nodecap for the new web client are enabled, serve
the client over requests to 100.100.100.100. Today, that is just a
static page that lists the local Tailcale IP addresses.
For now, this will render the readonly full management client, with an
"access" button that sends the user through check mode. After
completing check mode, they will still be in the read-only view, since
they are not accessing the client over Tailscale.
Instead, quad100 should serve the lobby client that has a "manage"
button that will open the management client on the Tailscale IP (and
trigger check mode). That is something we'll fix in a subsequent PR in
the web client code itself.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The existing read permission check looks like an oversight. Write seems
more appropriate for sining new nodes.
Updates https://github.com/tailscale/corp/issues/15506
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Now uses webClientAtomicBool as the source of truth for whether the web
client should be running in tailscaled, with it updated when either the
RunWebClient pref or CapabilityPreviewWebClient node capability changes.
This avoids requiring holding the LocalBackend lock on each call to
ShouldRunWebClient to check for the CapabilityPreviewWebClient value.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Clients optionally request private key filtering. If they don't, we
should require Write access for the user.
Updates https://github.com/tailscale/corp/issues/15506
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
WebClientShutdown tries to acquire the b.mu lock, so run it in a go
routine so that it can finish shutdown after setPrefsLockedOnEntry is
finished. This is the same reason b.sshServer.Shutdown is run in a go
routine.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For consistency and clarity around what the LocalBackend.web field
is used for.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
instead of starting a separate server listening on a particular port,
use the TCPHandlerForDst method to intercept requests for the special
web client port (currently 5252, probably configurable later).
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* ipn/localapi: add endpoint to handle APNS payloads
Fixes#9971. This adds a new `handle-push-message` local API endpoint. When an APNS payload is delivered to the main app, this endpoint can be used to forward the JSON body of the message to the backend, making a POST request.
cc @bradfitz
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
* Address comments from code review
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
---------
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
For a serve config with a path handler, ensure the caller is a local administrator on Windows.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
In addition to the new policy keys for the new options, some
already-in-use but missing policy keys are also being added to
util/syspolicy.
Updates ENG-2133
Change-Id: Iad08ca47f839ea6a65f81b76b4f9ef21183ebdc6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It would end up resetting whatever hostinfo we had constructed
and leave the backend statemachine in a broken state.
This fixes that by storing the PushDeviceToken on the LocalBackend
and populating it on Hostinfo before passing it to controlclient.
Updates tailscale/corp#8940
Updates tailscale/corp#15367
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The value being passed was the same as whats on b.hostinfo, so just
use that directly.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Go has no way to explicitly identify Go struct as effectively a tuple,
so staticcheck assumes any external use of unkeyed literals is wrong.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This adds a check to prevent changes to ServeConfig if tailscaled
is run with a Locked config.
Missed in 1fc3573446.
Updates #1412
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit makes two changes to the web client auth flow error
handling:
1. Properly passes back the error code from the noise request from
the localapi. Previously we were using io.Copy, which was always
setting a 200 response status code.
2. Clean up web client browser sessions on any /wait endpoint error.
This avoids the user getting in a stuck state if something goes
wrong with their auth path.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Ensure that when a userspace proxy config is reloaded,
connections for any removed proxies are safely closed
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
