Replace CanPMTUD() with ShouldPMTUD() to check if peer path MTU discovery should
be enabled, in preparation for adding support for enabling/disabling peer MTU
dynamically.
Updated #311
Signed-off-by: Val <valerie@tailscale.com>
Add an enable/disable argument to setDontFragment() in preparation for dynamic
enable/disable of peer path MTU discovery. Add getDontFragment() to get the
status of the don't fragment bit from a socket.
Updates #311
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Use IPV6_MTU_DISCOVER for setting don't fragment on IPv6 sockets on Linux (was
using IP_MTU_DISCOVER, the IPv4 arg).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Make the debugknob variable name for enabling peer path MTU discovery match the
env variable name.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailcfg.Node zero-value clone equality checks failed when I added a
[]*foo to the structure, as the zero value and it's clone contained a
different slice header.
Updates #9377
Updates #9408
Signed-off-by: James Tucker <james@tailscale.com>
It has one user (LocalBackend) which can ask magicsock itself.
Updates #cleanup
Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(continuing the mission of removing rando methods from the Engine
interface that we don't need anymore)
Updates #cleanup
Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only used by Android, until
https://github.com/tailscale/tailscale-android/pull/131
which does the call to the netMon directly instead.
Updates #cleanup
Change-Id: Iab8a1d8f1e63250705835c75f40e2cd8c1c4d5b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're trying to start using that monster type less and eventually get
rid of it.
Updates #1909
Change-Id: I8e1e725bce5324fb820a9be6c7952767863e6542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I guess we missed this one earlier when we unified the various
copies into set.HandleSet.
Updates #cleanup
Change-Id: I7e6de9ce16e8fc4846abf384dfcc8eaec4d99e60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is both more efficient (because the knobs' bool is only updated
whenever Node is changed, rarely) and also gets us one step closer to
removing a case of storing a netmap.NetworkMap in
magicsock. (eventually we want to phase out much of the use of that
type internally)
Updates #1909
Change-Id: I37e81789f94133175064fdc09984e4f3a431f1a1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for incremental netmap update plumbing (#1909), make peerMap
also keyed by NodeID, as all the netmap node mutations passed around
later will be keyed by NodeID.
In the process, also:
* add envknob.InDevMode, as a signal that we can panic more aggressively
in unexpected cases.
* pull two moderately large blocks of code in Conn.SetNetworkMap out
into their own methods
* convert a few more sets from maps to set.Set
Updates #1909
Change-Id: I7acdd64452ba58e9d554140ee7a8760f9043f961
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't clean up the more idiomatic map[T]bool with true values, at
least yet. I just converted the relatively awkward struct{}-valued
maps.
Updates #cleanup
Change-Id: I758abebd2bb1f64bc7a9d0f25c32298f4679c14f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Replace %w verb with %v verb when logging errors.
Use %w only for wrapping errors with fmt.Errorf()
Fixes: #9213
Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upcoming work on incremental netmap change handling will require some
replumbing of which subsystems get notified about what. Done naively,
it could break "tailscale status --json" visibility later. To make sure
I understood the flow of all the updates I was rereading the status code
and realized parts of ipnstate.Status were being populated by the wrong
subsystems.
The engine (wireguard) and magicsock (data plane, NAT traveral) should
only populate the stuff that they uniquely know. The WireGuard bits
were fine but magicsock was populating stuff stuff that LocalBackend
could've better handled, so move it there.
Updates #1909
Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If we don't have the ICMP hint available, such as on Android, we can use
the signal of rx traffic to bias toward a particular endpoint.
We don't want to stick to a particular endpoint for a very long time
without any signals, so the sticky time is reduced to 1 second, which is
large enough to avoid excessive packet reordering in the common case,
but should be small enough that either rx provides a strong signal, or
we rotate in a user-interactive schedule to another endpoint, improving
the feel of failover to other endpoints.
Updates #8999
Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
There are cases where we do not detect the non-viability of a route, but
we will instead observe a failure to send. In a Disco path this would
normally be handled as a side effect of Disco, which is not available to
non-Disco WireGuard nodes. In both cases, recognizing the failure as
such will result in faster convergence.
Updates #8999
Signed-off-by: James Tucker <james@tailscale.com>
LastFullPing is now used for disco or wireguard only endpoints. This
change updates the comment to make that clear.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
There are latency values stored in bestAddr and endpointState that are
no longer applicable after a connectivity change and should be cleared
out, following the documented behavior of the function.
Updates #8999
Signed-off-by: James Tucker <james@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When sending a ping from the CLI, only accept a pong that is in reply
to the specific CLI ping we sent.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Due to the conflict between our nftables implementation and ufw, which is a common utility used
on linux. We now want to take a step back to prevent regression. This will give us more chance to
let users to test our nftables support and heuristic.
Updates: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To record wether user is using iptables or nftables after we add support to nftables on linux, we
are adding a field FirewallMode to NetInfo in HostInfo to reflect what firewall mode the host is
running, and form metrics. The information is gained from a global constant in hostinfo.go. We
set it when selection heuristic made the decision, and magicsock reports this to control.
Updates: tailscale/corp#13943
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
If a node is flapping or otherwise generating lots of STUN endpoints, we
can end up caching a ton of useless values and sending them to peers.
Instead, let's apply a fixed per-Addr limit of endpoints that we cache,
so that we're only sending peers up to the N most recent.
Updates tailscale/corp#13890
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8
The current router errors out when neither iptables nor nftables support is present. We
should fall back to the previous behaviour which we creates a dummy iptablesRunner.
Fixes: #8878
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
Netcheck no longer performs I/O itself, instead it makes requests via
SendPacket and expects users to route reply traffic to
ReceiveSTUNPacket.
Netcheck gains a Standalone function that stands up sockets and
goroutines to implement I/O when used in a standalone fashion.
Magicsock now unconditionally routes STUN traffic to the netcheck.Client
that it hosts, and plumbs the send packet sink.
The CLI is updated to make use of the Standalone mode.
Fixes#8723
Signed-off-by: James Tucker <james@tailscale.com>
