Signed-off-by: Chenyang Gao <gps949@outlook.com>
in commit 6e96744, the tsd system type has been added.
Which will cause the daemon will crash on some OSs (Windows, darwin and so on).
The root cause is that on those OSs, handleSubnetsInNetstack() will return true and set the conf.Router with a wrapper.
Later in NewUserspaceEngine() it will do subsystem set and found that early set router mismatch to current value, then panic.
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This holds back gvisor, kubernetes, goreleaser, and esbuild, which all
had breaking API changes.
Updates #8043
Updates #7381
Updates #8042 (updates u-root which adds deps)
Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change introduces address selection for wireguard only endpoints.
If a endpoint has not been used before, an address is randomly selected
to be used based on information we know about, such as if they are able
to use IPv4 or IPv6. When an address is initially selected, we also
initiate a new ICMP ping to the endpoints addresses to determine which
endpoint offers the best latency. This information is then used to
update which endpoint we should be using based on the best possible
route. If the latency is the same for a IPv4 and an IPv6 address, IPv6
will be used.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
DERP doesn't support HTTP/2. If an HTTP/2 proxy was placed in front of
a DERP server requests would fail because the connection would
be initialized with HTTP/2, which the DERP client doesn't support.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
This change adds a v6conn to the pinger to enable sending pings to v6
addrs.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
We need to always specify tags when creating an AuthKey from an OAuth key.
Check for that, and reuse the `--advertise-tags` param.
Updates #7982
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This also adds a bunch of tests for this function to ensure that we're
returning the proper IP(s) in all cases.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This provides an example of using native Prometheus metrics with tsweb.
Prober library seems to be the only user of PrometheusVar, so I am
removing support for it in tsweb.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The handler will expose built-in process and Go metrics by default,
which currently duplicate some of the expvar-proxied metrics
(`goroutines` vs `go_goroutines`, `memstats` vs `go_memstats`), but as
long as their names are different, Prometheus server will just scrape
both.
This will change /debug/varz behaviour for most tsweb binaries, but
notably not for control, which configures a `tsweb.VarzHandler`
[explicitly](a5b5d5167f/cmd/tailcontrol/tailcontrol.go (L779))
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This adds the util/sysresources package, which currently only contains a
function to return the total memory size of the current system.
Then, we modify magicsock to scale the number of buffered DERP messages
based on the system's available memory, ensuring that we never use a
value lower than the previous constant of 32.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d
#7339 changed the root directory logic to find the ancestor of the cwd
with a go.mod file. This works when running the the binary from this
repo directly, but breaks when we're a dependency in another repo.
Allow the directory to be passed in via a -rootdir flag (the repo that
depends on it can then use `go list -m -f '{{.Dir}}' tailscale.com`
or similar to pass in the value).
Updates tailscale/corp#10165
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
When running a SOCKS or HTTP proxy, configure the tshttpproxy package to
drop those addresses from any HTTP_PROXY or HTTPS_PROXY environment
variables.
Fixes#7407
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6cd7cad7a609c639780484bad521c7514841764b
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.
It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Since users can run tailscaled in a variety of ways (root, non-root,
non-root with process capabilities on Linux), this check will print the
current process permissions to the log to aid in debugging.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7
In addition to checking the total hostname length, validate characters used in each DNS label and label length.
Updates https://github.com/tailscale/corp/issues/10012
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Kubernetes uses SPDY/3.1 which is incompatible with HTTP/2, disable it
in the transport and server.
Fixes#7645Fixes#7646
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
This allows disabling spread mode, which is helpful if you are manually
running derpprobe in `--once` mode against a small number of DERP
machines.
Updates https://github.com/tailscale/corp/issues/9916
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We were not handling tags at all, pass them through as Impersonate-Group headers.
And use the FQDN for tagged nodes as Impersonate-User.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This lets a tsnet binary share a server out over Tailscale Funnel.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This reverts commit 6eca47b16c and fixes forward.
Previously the first ever streaming MapRequest that a client sent would also
set ReadOnly to true as it didn't have any endpoints and expected/relied on the
map poll to restart as soon as it got endpoints. However with 48f6c1eba4,
we would no longer restart MapRequests as frequently as we used to, so control
would only ever get the first streaming MapRequest which had ReadOnly=true.
Control would treat this as an uninteresting request and would not send it
any further netmaps, while the client would happily stay in the map poll forever
while litemap updates happened in parallel.
This makes it so that we never set `ReadOnly=true` when we are doing a streaming
MapRequest. This is no longer necessary either as most endpoint discovery happens
over disco anyway.
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
Add a DNS server which always responds as its own IP addresses.
Additionally add a tsnet TailscaleIPs() function to return the
IP addresses, both IPv4 and IPv6.
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
No ListenPacket support yet, but Listen with a udp network type fit
easier into netstack's model to start.
Then added an example of using it to cmd/sniproxy with a little udp
:53 handler.
No tests in tsnet yet because we don't have support for dialing over
UDP in tsnet yet. When that's done, a new test can test both sides.
Updates #5871
Updates #1748
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is to address a possible DNS failure on startup. Before this
change IPv6 addresses would be listed first, and the client dialer would
fail for hosts without IPv6 connectivity.
We had two implemenetations of the kube client, merge them.
containerboot was also using a raw http.Transport, this also has
the side effect of making it use a http.Client
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Given recent changes in corp, I originally thought we could remove all of the
syso files, but then I realized that we still need them so that binaries built
purely from OSS (without going through corp) will still receive a manifest.
We can remove the arm32 one though, since we don't support 32-bit ARM on Windows.
Updates https://github.com/tailscale/corp/issues/9576
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the k8s operator to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates tsconnect to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the linux cli to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
trimmed builds don't have absolute path information in executable
metadata, which leads the runtime.Caller approach failing
mysteriously in yarn with complaints about relative package paths.
So, instead of using embedded package metadata to find paths,
expect that we're being invoked within the tailscale repo, and
locate the tsconnect directory that way.
Signed-off-by: David Anderson <danderson@tailscale.com>
This ensures that we put the kubeconfig in the correct directory from within the macOS Sandbox when
paired with tailscale/corp@3035ef7
Updates #7220
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In the switch to static toolchains, we removed a legacy oddity from the
toolchain URL structure, but forgot to update printdep.
Signed-off-by: David Anderson <danderson@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Tailnet-owned auth keys (which all OAuth-created keys are) must include tags, since there is no user to own the registered devices.
Signed-off-by: Will Norris <will@tailscale.com>
