Commit Graph

992 Commits

Author SHA1 Message Date
Brad Fitzpatrick
58abae1f83 net/dns/{publicdns,resolver}: add NextDNS DoH support
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.

For DoH, the customer ID is in the URL path.

For IPv6, the IP address includes the customer ID in the lower bits.

For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.

We don't use the IP linking mechanism.

Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.

Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.

If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.

Updates #2452

Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-09-08 12:50:32 -07:00
Andrew Dunham
f52a659076
net/dnsfallback: allow setting log function (#5550)
This broke a test in corp that enforces we don't use the log package.

Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2022-09-06 11:19:50 -04:00
Andrew Dunham
b8596f2a2f
net/dnsfallback: cache most recent DERP map on disk (#5545)
This is especially helpful as we launch newer DERPs over time, and older
clients have progressively out-of-date static DERP maps baked in. After
this, as long as the client has successfully connected once, it'll cache
the most recent DERP map it knows about.

Resolves an in-code comment from @bradfitz

Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2022-09-05 14:36:30 -04:00
Kris Brandow
19008a3023 net/dnscache: use net/netip
Removes usage of net.IP and net.IPAddr where possible from net/dnscache.

Fixes #5282

Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
2022-09-01 17:54:19 -04:00
Brad Fitzpatrick
9bd9f37d29 go.mod: bump wireguard/windows, which moves to using net/netip
Updates #5162

Change-Id: If99a3f0000bce0c01bdf44da1d513f236fd7cdf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-31 08:36:56 -07:00
Brad Fitzpatrick
9f6c8517e0 net/dns: set OS DNS to 100.100.100.100 for route-less ExtraRecords [cap 41]
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.

Updates #1543

Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-30 12:36:25 -07:00
Maisem Ali
68d9d161f4 net/dns: [win] fix regression in disableDynamicUpdate
Somehow I accidentally set the wrong registry value here.
It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0.

This is a regression from 545639e.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-29 15:28:59 -07:00
Nahum Shalman
214242ff62 net/dns/publicdns: Add Mullvad DoH
See https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/

The Mullvad DoH servers appear to only speak HTTP/2 and
the use of a non-nil DialContext in the http.Transport
means that ForceAttemptHTTP2 must be set to true to be
able to use them.

Signed-off-by: Nahum Shalman <nahamu@gmail.com>
2022-08-26 17:46:30 -07:00
Maisem Ali
9197dd14cc net/dns: [win] add MagicDNS entries to etc/hosts
This works around the 2.3s delay in short name lookups when SNR is
enabled.
C:\Windows\System32\drivers\etc\hosts file. We only add known hosts that
match the search domains, and we populate the list in order of
Search Domains so that our matching algorithm mimics what Windows would
otherwise do itself if SNR was off.

Updates #1659

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-19 12:38:11 -05:00
Kris Brandow
9ae1161e85 net/dnscache: fix v4addrs to return only v4 addrs
Update the v4addrs function to filter out IPv6 addresses.

Fixes regression from 8725b14056.

Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
2022-08-17 14:19:37 -04:00
Kris Brandow
8f38afbf8e net/stun: convert to use net/netip.AddrPort
Convert ParseResponse and Response to use netip.AddrPort instead of
net.IP and separate port.

Fixes #5281

Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
2022-08-15 12:46:01 -04:00
Maisem Ali
25865f81ee net/dns: disable NetBIOS on Tailscale interfaces
Like LLMNR, NetBIOS also adds resolution delays and we don't support it
anyway so just disable it on the interface.

Updates #1659

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-14 22:55:08 -07:00
Maisem Ali
545639ee44 util/winutil: consolidate interface specific registry keys
Code movement to allow reuse in a follow up PR.

Updates #1659

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-14 22:34:59 -07:00
Maisem Ali
1cff719015 net/dns: [win] respond with SERVFAIL queries when no resolvers
Currently we forward unmatched queries to the default resolver on
Windows. This results in duplicate queries being issued to the same
resolver which is just wasted.

Updates #1659

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-12 17:09:30 -07:00
Andrew Dunham
d942a2ff56
net/dnscache: try IPv6 addresses first (#5349)
Signed-off-by: Andrew Dunham <andrew@tailscale.com>

Signed-off-by: Andrew Dunham <andrew@tailscale.com>
2022-08-11 19:00:39 -04:00
Maisem Ali
3bb57504af net/dns/resolver: add comments clarifying nil error returns
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-09 13:32:11 -07:00
Maisem Ali
4497bb0b81 net/dns/resolver: return SERVFAIL when no upstream resolvers set
Otherwise we just keep looping over the same thing again and again.

```
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
```

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-09 13:28:03 -07:00
Brad Fitzpatrick
ec9d13bce5 hostinfo, net/netcheck: use CutPrefix
Updates #5309

Change-Id: I37e594cfd245784bf810c493de68a66d3ff20677
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-05 15:17:44 -07:00
Brad Fitzpatrick
18109c63b0 net/socks5: use new Go 1.19 binary.AppendByteOrder.AppendUintX
Updates #4872

Change-Id: I43db63d2ba237324bc1cd87d4261197f14cb1088
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-05 08:30:48 -07:00
Andrew Dunham
f0d6f173c9
net/netcheck: try ICMP if UDP is blocked (#5056)
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2022-08-04 17:10:13 -04:00
Maisem Ali
a9f6cd41fd all: use syncs.AtomicValue
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-04 11:52:16 -07:00
Brad Fitzpatrick
4950fe60bd syncs, all: move to using Go's new atomic types instead of ours
Fixes #5185

Change-Id: I850dd532559af78c3895e2924f8237ccc328449d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-04 07:47:59 -07:00
Maisem Ali
9bb5a038e5 all: use atomic.Pointer
Also add some missing docs.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-08-03 21:42:52 -07:00
Brad Fitzpatrick
5381437664 logtail, net/portmapper, wgengine/magicsock: use fmt.Appendf
Fixes #5206

Change-Id: I490bb92e774ce7c044040537e2cd864fcf1dbe5a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-03 21:35:51 -07:00
Brad Fitzpatrick
5f6abcfa6f all: migrate code from netaddr.FromStdAddr to Go 1.18
With caveat https://github.com/golang/go/issues/53607#issuecomment-1203466984
that then requires a new wrapper. But a simpler one at least.

Updates #5162

Change-Id: I0a5265065bfcd7f21e8dd65b2bd74cae90d76090
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-02 22:25:07 -07:00
Brad Fitzpatrick
8725b14056 all: migrate more code code to net/netip directly
Instead of going through the tailscale.com/net/netaddr transitional
wrappers.

Updates #5162

Change-Id: I3dafd1c2effa1a6caa9b7151ecf6edd1a3fda3dd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-02 13:59:57 -07:00
Brad Fitzpatrick
116f55ff66 all: gofmt for Go 1.19
Updates #5210

Change-Id: Ib02cd5e43d0a8db60c1f09755a8ac7b140b670be
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-08-02 10:08:05 -07:00
Aaron Klotz
4dbdb19c26 net/tshttpproxy: fix incorrect type in Windows implementation, switch to mkwinsyscall, fix memory leak
The definition of winHTTPProxyInfo was using the wrong type (uint16 vs uint32)
for its first field. I fixed that type.

Furthermore, any UTF16 strings returned in that structure must be explicitly
freed. I added code to do this.

Finally, since this is the second time I've seen type safety errors in this code,
I switched the native API calls over to use wrappers generated by mkwinsyscall.
I know that would not have helped prevent the previous two problems, but every
bit helps IMHO.

Updates https://github.com/tailscale/tailscale/issues/4811

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-07-27 16:33:57 -06:00
nyghtowl
e6e1976c3a net/dns: remove systemd-resolved ping
Ping only needed to ensure system awak otherwise utilizing resolvConf to set dns mode.

Signed-off-by: nyghtowl <warrick@tailscale.com>
2022-07-27 14:15:22 -07:00
Brad Fitzpatrick
a12aad6b47 all: convert more code to use net/netip directly
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
    perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
    perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
    goimports -w .

Then delete some stuff from the net/netaddr shim package which is no
longer neeed.

Updates #5162

Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 21:53:49 -07:00
Brad Fitzpatrick
6a396731eb all: use various net/netip parse funcs directly
Mechanical change with perl+goimports.

Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then
goimports -d .

Finally, removed the net/netaddr wrappers, to prevent future use.

Updates #5162

Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 21:12:28 -07:00
Brad Fitzpatrick
7eaf5e509f net/netaddr: start migrating to net/netip via new netaddr adapter package
Updates #5162

Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 16:20:43 -07:00
Aaron Klotz
1cae618b03 net/dns: add Windows group policy notifications to the NRPT rule manager
As discussed in previous PRs, we can register for notifications when group
policies are updated and act accordingly.

This patch changes nrptRuleDatabase to receive notifications that group policy
has changed and automatically move our NRPT rules between the local and
group policy subkeys as needed.

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-07-22 14:24:39 -06:00
Melanie Warrick
f17873e0f4
net/dns: handle D-Bus restarts in resolved manager (#5026)
When dbus restarts it can cause the tailscaled to crash because the nil
signal was not handled in resolved.Fixing so the nil signal leads to a
connection reset and tailscaled stays connected to systemd when dbus restarted.

Fixes #4645

Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: nyghtowl <warrick@tailscale.com>

Co-authored-by: James Tucker <james@tailscale.com>
2022-07-22 12:49:18 -07:00
Maisem Ali
9514ed33d2 go.mod: bump gvisor.dev/gvisor
Pick up https://github.com/google/gvisor/pull/7787

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-07-21 16:41:18 -07:00
David Anderson
c1cb3efbba net/netcheck: test for OS IPv6 support as well as connectivity.
This lets us distinguish "no IPv6 because the device's ISP doesn't
offer IPv6" from "IPv6 is unavailable/disabled in the OS".

Signed-off-by: David Anderson <danderson@tailscale.com>
2022-07-18 18:02:12 -07:00
Brad Fitzpatrick
0d52674a84 net/tstun: diagnose /dev/net/tun fd leak, give better failure message
Updates #5029

Change-Id: Ibee5e0c9076fe764eb5d856d5ef8b09f4d0e2921
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-16 14:21:56 -07:00
Andrew Dunham
c7993d2b88
net/dns/resolver: add fuzz/unit test for #2533 (#5018)
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2022-07-08 09:22:50 -04:00
Tom DNetto
d6817d0f22 net/dns/resolver: respond with SERVFAIL if all upstreams fail
Fixes #4722

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-07-05 10:22:52 -07:00
Mihai Parparita
ec649e707f ipn/ipnlocal: prefer to use one CGNAT route on the Mac
Together with 06aa141632 this minimizes
the number of NEPacketTunnelNetworkSettings updates that we have to do,
and thus avoids Chrome interrupting outstanding requests due to
(perceived) network changes.

Updates #3102

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2022-06-30 13:18:52 -07:00
Brad Fitzpatrick
aa37aece9c ipn/ipnlocal, net/dns*, util/cloudenv: add AWS DNS support
And remove the GCP special-casing from ipn/ipnlocal; do it only in the
forwarder for *.internal.

Fixes #4980
Fixes #4981

Change-Id: I5c481e96d91f3d51d274a80fbd37c38f16dfa5cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-06-29 20:37:44 -07:00
Brad Fitzpatrick
88c2afd1e3 ipn/ipnlocal, net/dns*, util/cloudenv: specialize DNS config on Google Cloud
This does three things:

* If you're on GCP, it adds a *.internal DNS split route to the
  metadata server, so we never break GCP DNS names. This lets people
  have some Tailscale nodes on GCP and some not (e.g. laptops at home)
  without having to add a Tailnet-wide *.internal DNS route.
  If you already have such a route, though, it won't overwrite it.

* If the 100.100.100.100 DNS forwarder has nowhere to forward to,
  it forwards it to the GCP metadata IP, which forwards to 8.8.8.8.
  This means there are never errNoUpstreams ("upstream nameservers not set")
  errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs
  don't have systemd-resolved, so it's likely a DNS supremacy fight)

* makes the DNS fallback mechanism use the GCP metadata IP as a
  fallback before our hosted HTTP-based fallbacks

I created a default GCP VM from their web wizard. It has no
systemd-resolved.

I then made its /etc/resolv.conf be empty and deleted its GCP
hostnames in /etc/hosts.

I then logged in to a tailnet with no global DNS settings.

With this, tailscaled writes /etc/resolv.conf (direct mode, as no
systemd-resolved) and sets it to 100.100.100.100, which then has
regular DNS via the metadata IP and *.internal DNS via the metadata IP
as well. If the tailnet configures explicit DNS servers, those are used
instead, except for *.internal.

This also adds a new util/cloudenv package based on version/distro
where the cloud type is only detected once. We'll likely expand it in
the future for other clouds, doing variants of this change for other
popular cloud environments.

Fixes #4911

RELNOTES=Google Cloud DNS improvements

Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-06-29 17:39:13 -07:00
Denton Gentry
d7f452c0a1 net/portmapper: send discovery packet for IGD specifically.
There appear to be devices out there which send only their
first descriptor in response to a discovery packet for
`ssdp:all`, for example the Sagemcom FAST3890V3 only sends
urn:schemas-wifialliance-org:device:WFADevice:1

Send both ssdp:all and a discovery frame for
InternetGatewayDevice specifically.

Updates https://github.com/tailscale/tailscale/issues/3557

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-28 03:55:17 -07:00
Denton Gentry
09eaba91ad net/portmap: add a test for Sagemcom FAST3890V3.
Updates https://github.com/tailscale/tailscale/issues/3557

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-28 03:55:17 -07:00
Denton Gentry
b5553c6ad2 net/portmap: run go fmt
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-28 03:55:17 -07:00
Denton Gentry
de4c635e54 net/portmapper: make pcpCodeNotAuthorized log more descriptive
If PCP is present but disabled, turning it on might help
get direct connections.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-28 03:55:17 -07:00
Aaron Klotz
4baf34cf25 net/dns: set appropriate Windows registry values to prevent it from sending DNS changes concerning our interface to AD domain controllers.
We do this unconditionally inside SetDNS such that the values are always set
before we make any other changes to DNS configurations.

It should not be harmful for the settings to remain even when other DNS
settings are cleared out (since they only affect our network interface).

See https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/configure-dns-dynamic-updates-windows-server-2003 for details about the registry value.

Fixes https://github.com/tailscale/tailscale/issues/4829

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-06-24 11:41:33 -06:00
Aaron Klotz
8cdfd12977 net/dns: update Windows split DNS settings to work alongside other NRPT entries set by group policy.
When there are group policy entries for the NRPT that do not belong to Tailscale,
we recognize that we need to add ourselves to group policy and use that registry
key instead of the local one. We also refresh the group policy settings as
necessary to ensure that our changes take effect immediately.

Fixes https://github.com/tailscale/tailscale/issues/4607

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-06-23 15:42:22 -06:00
Brad Fitzpatrick
13d0b8e6a4 control/controlclient, net/dnscache: use typed singleflight fork
Change-Id: I12be4c5a91ae3a812fe88d9b2d15526fdbb5a921
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-06-17 10:20:16 -07:00
Denton Gentry
1392a93445 socks5: add a simple test
Start up a backend service, put a SOCKS5 server in front
of it, and verify that we can get data from the backend via
SOCKS5.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-09 10:41:06 -07:00
Denton Gentry
7fffddce8e net/portmapper: enable for iOS
In the 1.27 unstable releases we set the min-version to iOS15,
which means we have 50 MBytes of RAM in the Network Extension.
https://tailscale.com/blog/go-linker/

Include the UPnP/NAT-PMP/PCP portmapper support now that there
is memory for it.

Fixes https://github.com/tailscale/tailscale/issues/2495
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-06-09 10:40:25 -07:00
Mihai Parparita
edc90ebc61 net/wsconn: remove homegrown wrapper for turning a websocket.Conn into a net.Conn
The one from the nhooyr/websocket package seems to work equally well.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2022-06-07 09:28:56 -07:00
Mihai Parparita
27a1ad6a70
wasm: exclude code that's not used on iOS for Wasm too
It has similar size constraints. Saves ~1.9MB from the Wasm build.

Updates #3157

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2022-06-06 13:52:52 -07:00
Mihai Parparita
a9f32656f5 control/controlhttp: allow client and server to communicate over WebSockets
We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional
communication), but we should be able to do it over WebSockets. Reuses
derp WebSocket support that allows us to turn a WebSocket connection
into a net.Conn.

Updates #3157

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2022-06-02 21:20:54 -07:00
Maisem Ali
80157f3f37 net/dns/resolver: add support for <IPv4>.via-<site-id>
Currently we only support "via-<site-id>.<IPv4>", however that does not
work with Google Chrome which parses `http://via-1.10.0.0.1` as a search
string and not as a URL. This commit introduces "<IPv4>.via-<site-id>"
(`http://10.0.0.1.via-1`) which is parsed correctly by Chrome.

Updates #3616

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-06-02 23:20:37 +05:00
Brad Fitzpatrick
1336fb740b wgengine/netstack: make netstack MTU be 1280 also
Updates #3878

Change-Id: I1850085b32c8a40d85607b4ad433622c97d96a8d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-06-01 12:16:41 -07:00
Aaron Klotz
b005b79236 net/dns, paths, util/winutil: change net/dns/windowsManager NRPT management to support more than 50 domains.
AFAICT this isn't documented on MSDN, but based on the issue referenced below,
NRPT rules are not working when a rule specifies > 50 domains.

This patch modifies our NRPT rule generator to split the list of domains
into chunks as necessary, and write a separate rule for each chunk.

For compatibility reasons, we continue to use the hard-coded rule ID, but
as additional rules are required, we generate new GUIDs. Those GUIDs are
stored under the Tailscale registry path so that we know which rules are ours.

I made some changes to winutils to add additional helper functions in support
of both the code and its test: I added additional registry accessors, and also
moved some token accessors from paths to util/winutil.

Fixes https://github.com/tailscale/coral/issues/63

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-05-27 14:56:09 -06:00
Tom
acfe5bd33b
net/dns{., resolver}: time out DNS queries after 10 seconds (#4690)
Fixes https://github.com/tailscale/corp/issues/5198

The upstream forwarder will block indefinitely on `udpconn.ReadFrom` if no
reply is recieved, due to the lack of deadline on the connection object.

There still isn't a deadline on the connection object, but the automatic closing
of the context on deadline expiry will close the connection via `closeOnCtxDone`,
unblocking the read and resulting in a normal teardown.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-05-18 10:40:04 -07:00
Mihai Parparita
86069874c9 net/tstun, wgengine: use correct type for counter metrics
We were marking them as gauges, but they are only ever incremented,
thus counter is more appropriate.

Signed-off-by: Mihai Parparita <mihai@tailscale.com>
2022-05-12 09:30:50 -07:00
Maisem Ali
fd99c54e10 tailcfg,all: change structs to []*dnstype.Resolver
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-05-06 10:58:10 -07:00
Tom
d1d6ab068e
net/dns, wgengine: implement DNS over TCP (#4598)
* net/dns, wgengine: implement DNS over TCP

Signed-off-by: Tom DNetto <tom@tailscale.com>

* wgengine/netstack: intercept only relevant port/protocols to quad-100

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-05-05 16:42:45 -07:00
James Tucker
f9e86e64b7 *: use WireGuard where logged, printed or named
Signed-off-by: James Tucker <james@tailscale.com>
2022-05-04 13:36:05 -07:00
James Tucker
ae483d3446 wgengine, net/packet, cmd/tailscale: add ICMP echo
Updates tailscale/corp#754

Signed-off-by: James Tucker <james@tailscale.com>
2022-05-03 13:03:45 -07:00
Tom DNetto
2a0b5c21d2 net/dns/{., resolver}, wgengine: fix goroutine leak on shutdown
Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-05-02 10:42:06 -07:00
Tom DNetto
7f45734663 assorted: documentation and readability fixes
This were intended to be pushed to #4408, but in my excitement I
forgot to git push :/ better late than never.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-30 18:42:19 -07:00
Tom DNetto
9e77660931 net/tstun,wgengine/{.,netstack}: handle UDP magicDNS traffic in netstack
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.

With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-30 10:18:59 -07:00
Tom DNetto
dc71d3559f net/tstun,wgengine: split PreFilterOut into multiple hooks
A subsequent commit implements handling of magicDNS traffic via netstack.
Implementing this requires a hook for traffic originating from the host and
hitting the tun, so we make another hook to support this.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-30 10:18:59 -07:00
Tom DNetto
5b85f848dd net/dns,net/dns/resolver: refactor channels/magicDNS out of Resolver
Moves magicDNS-specific handling out of Resolver & into dns.Manager. This
greatly simplifies the Resolver to solely issuing queries and returning
responses, without channels.

Enforcement of max number of in-flight magicDNS queries, assembly of
synthetic UDP datagrams, and integration with wgengine for
recieving/responding to magicDNS traffic is now entirely in Manager.
This path is being kept around, but ultimately aims to be deleted and
replaced with a netstack-based path.

This commit is part of a series to implement magicDNS using netstack.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-30 10:18:59 -07:00
Brad Fitzpatrick
6bed781259 all: gofmt all
Well, goimports actually (which adds the normal import grouping order we do)

Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-29 13:06:04 -07:00
James Tucker
96fec4b969 net/tshttpproxy: synology: pick proxy by scheme
This updates the fix from #4562 to pick the proxy based on the request
scheme.

Updates #4395, #2605, #4562
Signed-off-by: James Tucker <james@tailscale.com>
2022-04-28 11:56:37 -07:00
Maisem Ali
eff6a404a6 net/tshttpproxy: use http as the scheme for proxies
Currently we try to use `https://` when we see `https_host`, however
that doesn't work and results in errors like `Received error: fetch
control key: Get "https://controlplane.tailscale.com/key?v=32":
proxyconnect tcp: tls: first record does not look like a TLS handshake`

This indiciates that we are trying to do a HTTPS request to a HTTP
server. Googling suggests that the standard is to use `http` regardless
of `https` or `http` proxy

Updates #4395, #2605

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-04-28 10:45:33 -07:00
Maisem Ali
5a1ef1bbb9 net/tsdial: add SystemDial as a wrapper on netns.Dial
The connections returned from SystemDial are automatically closed when
there is a major link change.

Also plumb through the dialer to the noise client so that connections
are auto-reset when moving from cellular to WiFi etc.

Updates #3363

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-04-27 12:02:36 -07:00
Brad Fitzpatrick
c6c752cf64 net/tshttpproxy: fix typo
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-26 08:14:50 -07:00
Tom DNetto
5fb8e01a8b net/dns/resolver: add metric for number of truncated dns packets
Updates #2067

This should help us determine if more robust control of edns parameters
+ implementing answer truncation is warranted, given its likely complexity.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-25 13:05:28 -07:00
Brad Fitzpatrick
e97209c6bf net/dns: add tailscaled-on-macOS DNS OSConfigurator
This populates DNS suffixes ("ts.net", etc) in /etc/resolver/* files
to point to 100.100.100.100 so MagicDNS works.

It also sets search domains.

Updates #4276

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-23 20:43:41 -07:00
Tom DNetto
78fededaa5 net/dns/resolver: support magic resolution of via-<siteid>.<ip4> domains
Updates #3616

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-22 09:21:35 -07:00
James Tucker
700bd37730 tshttpproxy: support synology proxy configuration
Fixes #4395
Fixes #2605

Signed-off-by: James Tucker <james@tailscale.com>
2022-04-21 18:39:00 -07:00
Tom DNetto
df26c63793 net/dns/resolver, net/tsaddr: fix reverse lookups in 4to6 IP range
Fixes #4439

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-21 09:37:21 -07:00
Brad Fitzpatrick
d413850bd7 cmd/tailscale: add "debug via" subcommand to do CIDR math for via ranges
$ tailscale debug via 0xb 10.2.0.0/16
fd7a:115c:a1e0:b1a:0🅱️a02:0/112
$ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112
site 11 (0xb), 10.2.0.0/16

Previously: 3ae701f0eb

This adds a little debug tool to do CIDR math to make converting between
those ranges easier for now.

Updates #3616

Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-20 14:47:48 -07:00
Tom DNetto
c8f4dfc8c0 derp/derphttp,net/netcheck: improve netcheck behavior under MITM proxies
In cases where tailscale is operating behind a MITM proxy, we need to consider
that a lot more of the internals of our HTTP requests are visible and may be
used as part of authorization checks. As such, we need to 'behave' as closely
as possible to ideal.

 - Some proxies do authorization or consistency checks based the on Host header
   or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to
   construct a `*http.Request` with a valid URI everytime HTTP is going to be
   used on the wire, even if its over TLS.
   Aside from the singular instance in net/netcheck, I couldn't find anywhere
   else a http.Request was constructed incorrectly.

 - Some proxies may deny requests, typically by returning a 403 status code. We
   should not consider these requests as a valid latency check, so netcheck
   semantics have been updated to consider >299 status codes as a failed probe.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-19 12:47:57 -07:00
Brad Fitzpatrick
cc575fe4d6 net/dns: schedule DoH upgrade explicitly, fix Resolver.Addr confusion
Two changes in one:

* make DoH upgrades an explicitly scheduled send earlier, when we come
  up with the resolvers-and-delay send plan. Previously we were
  getting e.g.  four Google DNS IPs and then spreading them out in
  time (for back when we only did UDP) but then later we added DoH
  upgrading at the UDP packet layer, which resulted in sometimes
  multiple DoH queries to the same provider running (each doing happy
  eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs.
  Instead, take those 4 Google/Cloudflare IPs and schedule 5 things:
  first the DoH query (which can use all 4 IPs), and then each of the
  4 IPs as UDP later.

* clean up the dnstype.Resolver.Addr confusion; half the code was
  using it as an IP string (as documented) as half was using it as
  an IP:port (from some prior type we used), primarily for tests.
  Instead, document it was being primarily an IP string but also
  accepting an IP:port for tests, then add an accessor method on it
  to get the IPPort and use that consistently everywhere.

Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-19 12:00:22 -07:00
Brad Fitzpatrick
e3a4952527 net/dns/resolver: count errors when racing DNS queries, fail earlier
If all N queries failed, we waited until context timeout (in 5
seconds) to return.

This makes (*forwarder).forward fail fast when the network's
unavailable.

Change-Id: Ibbb3efea7ed34acd3f3b29b5fee00ba8c7492569
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-19 11:07:31 -07:00
Brad Fitzpatrick
d9efbd97cb net/dns: remove an unused function
Change-Id: I7c920c76223ffac37954ef2a18754afc52177598
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-19 10:53:54 -07:00
Brad Fitzpatrick
ecea6cb994 net/dns/resolver: make DoH dialer use existing dnscache happy eyeball dialer
Simplify the ability to reason about the DoH dialing code by reusing the
dnscache's dialer we already have.

Also, reduce the scope of the "ip" variable we don't want to close over.

This necessarily adds a new field to dnscache.Resolver:
SingleHostStaticResult, for when the caller already knows the IPs to be
returned.

Change-Id: I9f2aef7926f649137a5a3e63eebad6a3fffa48c0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-18 13:18:39 -07:00
Brad Fitzpatrick
f4f76eb275 net/dnsfallback: update from 'go generate'
Change-Id: I93e0e6d9a4a471953c1ffef07f32605c5724aed8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-17 10:06:09 -07:00
phirework
52d32c94d8
net/dns/publicdns: add missing call to sync.Once.Do (#4410)
Signed-off-by: Jenny Zhang <jz@tailscale.com>
2022-04-14 17:45:58 -04:00
phirework
83c734a6e0
net/dns, util/publicdns: extract public DNS mapping into own package (#4405)
This extracts DOH mapping of known public DNS providers in
forwarder.go into its own package, to be consumed by other repos

Signed-off-by: Jenny Zhang <jz@tailscale.com>
2022-04-14 17:15:54 -04:00
Brad Fitzpatrick
a49d8d5200 Revert ".github/workflows: work around golang/go#51629"
This reverts commit 2a412ac9ee.

Updates #4194

Change-Id: I0098b66b71d20bea301ca79058c1cdd201237dd0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-13 14:27:01 -07:00
Brad Fitzpatrick
3ae701f0eb net/tsaddr, wgengine/netstack: add IPv6 range that forwards to site-relative IPv4
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)

e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:

    tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112

(112 being /128 minuse the /96 v6 prefix length)

Then people in my tailnet can:

     $ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
     <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....

Updates #3616, etc

RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes

Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-04-11 17:26:07 -07:00
Tom
24bdcbe5c7
net/dns, net/dns/resolver, wgengine: refactor DNS request path (#4364)
* net/dns, net/dns/resolver, wgengine: refactor DNS request path

Previously, method calls into the DNS manager/resolver types handled DNS
requests rather than DNS packets. This is fine for UDP as one packet
corresponds to one request or response, however will not suit an
implementation that supports DNS over TCP.

To support PRs implementing this in the future, wgengine delegates
all handling/construction of packets to the magic DNS endpoint, to
the DNS types themselves. Handling IP packets at this level enables
future support for both UDP and TCP.

Signed-off-by: Tom DNetto <tom@tailscale.com>
2022-04-08 12:17:31 -07:00
Tom
6be7931eb4
net/dns/resolver: return symbolic PTR records for TS service IPs (#4361)
Fixes #1233

Signed-off-by: Tom DNetto <tom@tailscale.com>

Co-authored-by: Tom DNetto <tom@tailscale.com>
2022-04-06 15:56:21 -07:00
Maisem Ali
309ddef852
net/netutil: add CheckIPForwardingLinux (#4301)
Combine the code between `LocalBackend.CheckIPForwarding` and
`controlclient.ipForwardingBroken`.

Fixes #4300

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-03-28 10:24:11 -07:00
Brad Fitzpatrick
e4d8d5e78b net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug
Fixes #2642

Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-26 21:24:24 -07:00
Brad Fitzpatrick
753f1bfad4 cmd/tailscale: write fewer known_hosts, resolve ssh host to FQDN early
Updates #3802

Change-Id: Ic44fa2e6661a9c046e725c04fa6b8213d3d4d2b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-25 15:17:27 -07:00
Maisem Ali
b2f269d5b7 net/dnsfallback: do not attempt lookups of IPs.
Currently if the passed in host is an IP, Lookup still attempts to
resolve it with a dns server. This makes it just return the IP directly.

Updates tailscale/corp#4475

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-03-24 22:43:01 -07:00
Maisem Ali
b45bb577a0 net/dnscache: do not call LookupIPFallback if the context was canceled.
When the context is canceled, dc.dialOne returns an error from line 345.
This causes the defer on line 312 to try to resolve the host again, which
triggers a dns lookup of "127.0.0.1" from derp.

Updates tailscale/corp#4475

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-03-24 22:43:01 -07:00
Brad Fitzpatrick
b647977b33 net/netutil: move some net utils from control/controlhttp to netutil
In prep for reuse elsewhere.

Change-Id: I1b804edf76ac66b9108e6f434e77eab7a7472d69
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-24 09:56:10 -07:00
James Tucker
445c04c938
wgengine: inject packetbuffers rather than bytes (#4220)
Plumb the outbound injection path to allow passing netstack
PacketBuffers down to the tun Read, where they are decref'd to enable
buffer re-use. This removes one packet alloc & copy, and reduces GC
pressure by pooling outbound injected packets.

Fixes #2741
Signed-off-by: James Tucker <james@tailscale.com>
2022-03-21 14:58:43 -07:00
Brad Fitzpatrick
f2041c9088 all: use strings.Cut even more
Change-Id: I943ce72c6f339589235bddbe10d07799c4e37979
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-19 13:02:38 -07:00
Aaron Klotz
6e91f872af net/tshttpproxy: ensure we pass the correct flags to WinHttpOpen on Win7 and Win8.0
The best flag to use on Win7 and Win8.0 is deprecated in Win8.1, so we resolve
the flag depending on OS version info.

Fixes https://github.com/tailscale/tailscale/issues/4201

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2022-03-18 11:05:02 -06:00
David Anderson
2a412ac9ee .github/workflows: work around golang/go#51629
Incidentally, simplify the go generate CI workflow, by
marking the dnsfallback update non-hermetic (so CI will
skip it) rather than manually filter it out of `go list`.

Updates #4194

Signed-off-by: David Anderson <danderson@tailscale.com>
2022-03-17 17:22:17 -07:00
Josh Bleecher Snyder
0868329936 all: use any instead of interface{}
My favorite part of generics.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2022-03-17 11:35:09 -07:00
Brad Fitzpatrick
61ee72940c all: use Go 1.18's strings.Cut
More remain.

Change-Id: I6ec562cc1f687600758deae1c9d7dbd0d04004cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-16 14:53:59 -07:00
Josh Bleecher Snyder
0ef74f37a5 net/dns/resolver: remove closure allocation explanation
As of Go 1.18, the register ABI list includes arm64, amd64,
ppc64, and ppc64le. This is a large enough percentage of the
architectures that it's not worth explaining.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2022-03-16 12:45:28 -07:00
Brad Fitzpatrick
61cdcf4082 net/interfaces: add FreeBSD default route lookup (portmapping, etc)
Updates #4101 (probably fixes)

Change-Id: I2b75ee3ced276fb7b211f17c382621cf1ef882fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-08 13:02:02 -08:00
Maisem Ali
2fb087891b net/socks5: always close client connections after serving
Customer reported an issue where the connections were not closing, and
would instead just stay open. This commit makes it so that we close out
the connection regardless of what error we see. I've verified locally
that it fixes the issue, we should add a test for this.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2022-03-08 12:52:20 -08:00
Brad Fitzpatrick
b493ef5b71 net/tsaddr: add func ContainsExitRoutes
Change-Id: I772441a406083e2fe0f9374b2b23d89aac18928f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-04 08:56:06 -08:00
Brad Fitzpatrick
55095df644 net/interfaces: get Linux default route from netlink as fallback
If it's in a non-standard table, as it is on Unifi UDM Pro, apparently.

Updates #4038 (probably fixes, but don't have hardware to verify)

Change-Id: I2cb9a098d8bb07d1a97a6045b686aca31763a937
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-28 19:57:34 -08:00
Dmytro Shynkevych
d9a7205be5 net/tstun: set link speed to SPEED_UNKNOWN
Fixes #3933.

Signed-off-by: Dmytro Shynkevych <dm.shynk@gmail.com>
2022-02-27 23:11:35 -08:00
Brad Fitzpatrick
7d897229d9 net/dns: ignore permission errors on Synology DSM7 for now
Updates #4017

Change-Id: Ia7fd4df47588c010dea8e63d88f397cc8eb748e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-23 10:13:53 -08:00
Brad Fitzpatrick
bb94561c96 net/netutil: fix regression where peerapi would get closed after 1st req
I introduced a bug in 8fe503057d when unifying oneConnListener
implementations.

The NewOneConnListenerFrom API was easy to misuse (its Close method
closes the underlying Listener), and we did (via http.Serve, which
closes the listener after use, which meant we were close the peerapi's
listener, even though we only wanted its Addr)

Instead, combine those two constructors into one and pass in the Addr
explicitly, without delegating through to any Listener.

Change-Id: I061d7e5f842e0cada416e7b2dd62100d4f987125
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-22 13:52:18 -08:00
Brad Fitzpatrick
2ff481ff10 net/dns: add health check for particular broken-ish Linux DNS config
Updates #3937 (need to write docs before closing)

Change-Id: I1df7244cfbb0303481e2621ee750d21358bd67c6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-16 10:40:04 -08:00
Brad Fitzpatrick
c988bd6ed1 net/dns/resolvconffile: unify three /etc/resolv.conf parsers into new package
Change-Id: I2120893ca802d12f1bd0407d49077d3672627d33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-14 20:55:57 -08:00
Brad Fitzpatrick
8d6cf14456 net/dnscache: don't do bootstrap DNS lookup after most failed dials
If we've already connected to a certain name's IP in the past, don't
assume the problem was DNS related. That just puts unnecessarily load
on our bootstrap DNS servers during regular restarts of Tailscale
infrastructure components.

Also, if we do do a bootstrap DNS lookup and it gives the same IP(s)
that we already tried, don't try them again.

Change-Id: I743e8991a7f957381b8e4c1508b8e9d0df1782fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-14 14:28:08 -08:00
Brad Fitzpatrick
903988b392 net/dnscache: refactor from func-y closure-y state to types & methods
No behavior changes (intended, at least).

This is in prep for future changes to this package, which would get
too complicated in the current style.

Change-Id: Ic260f8e34ae2f64f34819d4a56e38bee8d8ac5ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-14 10:47:48 -08:00
Brad Fitzpatrick
8267ea0f80 net/tstun: remove TODO that's done
This TODO was both added and fixed in 506c727e3.

As I recall, I wasn't originally going to do it because it seemed
annoying, so I wrote the TODO, but then I felt bad about it and just
did it, but forgot to remove the TODO.

Change-Id: I8f3514809ad69b447c62bfeb0a703678c1aec9a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-13 20:59:47 -08:00
Brad Fitzpatrick
8fe503057d net/netutil: unify two oneConnListeners into a new package
I was about to add a third copy, so unify them now instead.

Change-Id: I3b93896aa1249b1250a6b1df4829d57717f2311a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-13 14:57:27 -08:00
Brad Fitzpatrick
21358cf2f5 net/dns: slightly optimize dbusPing for non-dbus case [Linux]
Avoid some work when D-Bus isn't running.

Change-Id: I6f89bb75fdb24c13f61be9b400610772756db1ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-11 14:00:54 -08:00
Brad Fitzpatrick
37e7a387ff net/dns: remove some unused code for detecting systemd-resolved [Linux]
Change-Id: I19c5fd2cdacfb9e5b688ccd9b4336ae4edffc445
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-11 14:00:54 -08:00
Brad Fitzpatrick
15599323a1 net/dns: fix systemd-resolved detection race at boot
If systemd-resolved is enabled but not running (or not yet running,
such as early boot) and resolv.conf is old/dangling, we weren't
detecting systemd-resolved.

This moves its ping earlier, which will trigger it to start up and
write its file.

Updates #3362 (likely fixes)
Updates #3531 (likely fixes)

Change-Id: I6392944ac59f600571c43b8f7a677df224f2beed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-11 14:00:54 -08:00
Denton Gentry
dbea8217ac net/dns: add NetworkManager regression test
Use the exact /etc/resolv.conf file from a user report.
Updates https://github.com/tailscale/tailscale/issues/3531

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2022-02-10 15:01:49 -08:00
Brad Fitzpatrick
2a67beaacf net/interfaces: bound Linux /proc/net/route parsing
tailscaled was using 100% CPU on a machine with ~1M lines, 100MB+
of /proc/net/route data.

Two problems: in likelyHomeRouterIPLinux, we didn't stop reading the
file once we found the default route (which is on the first non-header
line when present). Which meant it was finding the answer and then
parsing 100MB over 1M lines unnecessarily. Second was that if the
default route isn't present, it'd read to the end of the file looking
for it. If it's not in the first 1,000 lines, it ain't coming, or at
least isn't worth having. (it's only used for discovering a potential
UPnP/PMP/PCP server, which is very unlikely to be present in the
environment of a machine with a ton of routes)

Change-Id: I2c4a291ab7f26aedc13885d79237b8f05c2fd8e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-02-03 09:31:25 -08:00
Aaron Bieber
e5cd765e00 net/dns/resolvd: properly handle not having "search" entries
This prevents adding an empty "search" line when no search domains are set.

Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
2022-01-31 15:11:28 -08:00
Brad Fitzpatrick
1af26222b6 go.mod: bump netstack, switch to upstream netstack
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.

This is that experiment.

Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)

Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-26 11:30:03 -08:00
Brad Fitzpatrick
41fd4eab5c envknob: add new package for all the strconv.ParseBool(os.Getenv(..))
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.

Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-24 11:51:23 -08:00
Brad Fitzpatrick
6feb8f4c51 net/dns: log why resolved does not look like it's on use [Linux]
Updates #3742
Updates #3531

Change-Id: I9fc7fa0f4bcab1cf8001ba92408c660a5b25f105
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-24 09:14:53 -08:00
Aaron Bieber
411c6c316c net/dns/resolvd: store nameservers
Currently only search domains are stored. This was an oversight
(under?) on my part.

As things are now, when MagicDNS is on and "Override local DNS" is
off, the dns forwarder has to timeout before names resolve. This
introduces a pretty annoying lang that makes everything feel
extremely slow. You will also see an error: "upstream nameservers
not set".

I tested with "Override local DNS" on and off. In both situations
things seem to function as expected (and quickly).

Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
2022-01-19 21:17:31 -08:00
Brad Fitzpatrick
c64af5e676 wgengine/netstack: clear TCP ECN bits before giving to gvisor
Updates #2642

Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-19 20:09:24 -08:00
Brad Fitzpatrick
390490e7b1 net/packet: fix typo in comment
Change-Id: Ia666609fde18db44bf38d4e656f490fc372ac3b6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-19 12:59:13 -08:00
David Anderson
463b3e8f62 net/dnscache: use tls.Conn.HandshakeContext.
Go 1.17 added a HandshakeContext func to take care of timeouts during
TLS handshaking, so switch from our homegrown goroutine implementation
to the standard way.

Signed-off-by: David Anderson <danderson@tailscale.com>
2022-01-13 23:01:29 +00:00
David Anderson
a9da6b73a8 net/dnscache: don't cancel the TLS context before writing to the result channel.
Cancelling the context makes the timeout goroutine race with the write that
reports a successful TLS handshake, so you can end up with a successful TLS
handshake that mysteriously reports that it timed out after ~0s in flight.

The context is always canceled and cleaned up as the function exits, which
happens mere microseconds later, so just let function exit clean up and
thereby avoid races.

Signed-off-by: David Anderson <danderson@tailscale.com>
2022-01-13 23:01:29 +00:00
Brad Fitzpatrick
24a04d07d1 net/dns/resolver: handle tabs as whitespace when ExitDNS parses resolv.conf
On Synology, the /etc/resolv.conf has tabs in it, which this
resolv.conf parser (we have two, sigh) didn't handle.

Updates #3710

Change-Id: I86f8e09ad1867ee32fa211e85c382a27191418ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-12 12:38:48 -08:00
Brad Fitzpatrick
51bc9a6d9d net/netns: remove a useless probe of the "ip" command
We stopped using it in 1.18.

Change-Id: If5adf1d99275286a89e2a05f0bce5193d9f6e5e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-11 17:47:06 -08:00
Brad Fitzpatrick
8df3fa4638 net/dns: make WSL network configuration opt-in for now
Tailscale seems to be breaking WSL configurations lately.  Until we
understand what changed, turn off Tailscale's involvement by default
and make it opt-in.

Updates #2815

Change-Id: I9977801f8debec7d489d97761f74000a4a33f71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-11 10:10:21 -08:00
Aaron Bieber
189f359609
net/dns: teach OpenBSD's manager to talk to resolvd(8). (#2789)
OpenBSD 6.9 and up has a daemon which handles nameserver configuration. This PR
teaches the OpenBSD dns manager to check if resolvd is being used. If it is, it
will use the route(8) command to tell resolvd to add the Tailscale dns entries
to resolv.conf

Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
2022-01-11 08:45:50 -08:00
Brad Fitzpatrick
8d0ed1c9ba net/dns/resolver: on Android, make ExitDNS use net package for DNS
Like Windows.

Updates #1738

Change-Id: I9f26bc58ce7e760c749786fbe5d9952c99eeb91c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-06 16:17:24 -08:00
Brad Fitzpatrick
506c727e30 ipnlocal, net/{dns,tsaddr,tstun}, wgengine: support MagicDNS on IPv6
Fixes #3660

RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled.

Change-Id: I001e983df5feeb65289abe5012dedd177b841b45
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-04 14:37:22 -08:00
Brad Fitzpatrick
2513d2d728 net/{neterror,dns/resolver}: move PacketWasTruncated to neterror from DNS code
And delete the unused code in net/dns/resolver/neterr_*.go.

Change-Id: Ibe62c486bacce2733eb9968c96a98cbbdb2758bd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-03 14:03:30 -08:00
Brad Fitzpatrick
7d9b1de3aa netcheck,portmapper,magicsock: ignore some UDP write errors on Linux
Treat UDP send EPERM errors as a lost UDP packet, not something super
fatal. That's just the Linux firewall preventing it from going out.

And add a leaf package net/neterror for that (and future) policy that
all three packages can share, with tests.

Updates #3619

Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-31 08:27:21 -08:00
Brad Fitzpatrick
2c94e3c4ad wgengine/magicsock: don't unconditionally close DERP connections on rebind
Only if the source address isn't on the currently active interface or
a ping of the DERP server fails.

Updates #3619

Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-29 13:21:05 -08:00
Brad Fitzpatrick
04c2c5bd80 net/interfaces: define DefaultRouteInterface and State.DefaultRouteInterface
It was pretty ill-defined before and mostly for logging. But I wanted
to start depending on it, so define what it is and make Windows match
the other operating systems, without losing the log output we had
before. (and add tests for that)

Change-Id: I0fbbba1cfc67a265d09dd6cb738b73f0f6005247
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-29 12:13:15 -08:00
Brad Fitzpatrick
eb26c081b1 net/dns: bound time we wait on restarting systemd-resolved in another place
Fixes #3629
Updates #3537

Change-Id: I5d4b6acfcfdf0e3efcf6eb49c5e6cf4521e4baed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-28 11:09:07 -08:00
Brad Fitzpatrick
0aa4c6f147 net/dns/resolver: add debug HTML handler to see what DNS traffic was forwarded
Change-Id: I6b790e92dcc608515ac8b178f2271adc9fd98f78
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-21 14:32:36 -08:00
Brad Fitzpatrick
0848b36dd2 net/dns/resolver: add metrics to PTR lookup misses
Updates tailscale/corp#3326

Change-Id: I58077d889a3b58ef0633267c92ffb265686ce152
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-19 09:50:16 -08:00
Brad Fitzpatrick
39f22a357d net/dns/resolver: send NXDOMAIN to iOS DNS-SD/Bonjour queries
Don't just ignore them. See if this makes them calm down.

Updates #3363

Change-Id: Id1d66308e26660d26719b2538b577522a1e36b63
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-18 19:24:19 -08:00
Brad Fitzpatrick
394c9de02b net/dns/resolver: add nameFromQuery benchmark
To convince me it's not as alloc-y as it looks.

Change-Id: I503a0cc267268a23d2973dfde9833c420be4e868
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-18 19:03:45 -08:00
Brad Fitzpatrick
c7052154d5 net/dns/resolver: fix the subject in a func comment
Change-Id: I519268c20dbd2c2da92da565839d3c1c84612dcc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-18 15:11:01 -08:00
Brad Fitzpatrick
486059589b all: gofmt -w -s (simplify) tests
And it updates the build tag style on a couple files.

Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-15 08:43:41 -08:00
Brad Fitzpatrick
cced414c7d net/dns/resolver: add Windows ExitDNS service support, using net package
Updates #1713
Updates #835

Change-Id: Ia71e96d0632c2d617b401695ad68301b07c1c2ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-10 20:47:17 -08:00
Brad Fitzpatrick
cab5c46481 net/dns: bound how long we block looking for, restarting systemd-resolved
Fixes #3537

Change-Id: Iba6a3cde75983490d4072b5341f48dbfa2f997c0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-10 09:58:14 -08:00
Brad Fitzpatrick
39ffa16853 net/dnscache, net/tsdial: add DNS caching to tsdial UserDial
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.

This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.

Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.

Updates #3507

Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-09 11:34:21 -08:00
Brad Fitzpatrick
21741e111b net/packet: add ICMP6Header, like ICMP4Header
So we can generate IPv6 ping replies.

Change-Id: I79a9a38d8aa242e5dfca4cd15dfaffaea6cb1aee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-09 09:30:10 -08:00
Brad Fitzpatrick
affc4530a2 net/packet: don't make IP6Header.marshalPseudo assume UDP
It will be used for ICMPv6 next, so pass in the proto.

Also, use the ipproto constants rather than hardcoding the mysterious
number.

Change-Id: I57b68bdd2d39fff75f82affe955aff9245de246b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-08 21:15:46 -08:00
Brad Fitzpatrick
485bcdc951 net/packet: fix doc copy/paste-o
Change-Id: I0aca490b3ccb0c124192afb362a10b19a15a3e2b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-08 21:12:43 -08:00
Brad Fitzpatrick
9c5c9d0a50 ipn/ipnlocal, net/tsdial: make SOCKS/HTTP dials use ExitDNS
And simplify, unexport some tsdial/netstack stuff in the the process.

Fixes #3475

Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-03 13:39:37 -08:00
Brad Fitzpatrick
adc5997592 net/tsdial: give netstack a Dialer, start refactoring name resolution
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.

This also plumbs a Dialer into netstack and unexports the dnsMap
internals.

And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.

Updates #3475

Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-02 11:33:13 -08:00
Brad Fitzpatrick
8775c646be net/tsdial: make dialing to peerapi work in netstack mode
With this, I'm able to send a Taildrop file (using "tailscale file cp")
from a Linux machine running --tun=userspace-networking.

Updates #2179

Change-Id: I4e7a4fb0fbda393e4fb483adb06b74054a02cfd0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-01 14:16:34 -08:00
Brad Fitzpatrick
ad3d6e31f0 net/tsdial: move macOS/iOS peerapi sockopt logic from LocalBackend
Change-Id: I812cae027c40c70cdc701427b1a1850cd9bcd60c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-01 12:55:31 -08:00
Brad Fitzpatrick
c7fb26acdb net/tsdial: also plumb TUN name and monitor into tsdial.Dialer
In prep for moving stuff out of LocalBackend.

Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-01 10:36:55 -08:00
Brad Fitzpatrick
c37af58ea4 net/tsdial: move more weirdo dialing into new tsdial package, plumb
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.

Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.

As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.

A number of steps remain, including but limited to:

* move a bunch more random dialing stuff

* make netstack-mode tailscaled be able to use exit node's DNS proxy,
  teaching tsdial's resolver to use it when an exit node is in use.

Updates #1713

Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-12-01 10:36:55 -08:00
Josh Bleecher Snyder
2075c39fd7 net/portmapper: deflake TestPCPIntegration
Logging in goroutines after the test completed
caused data races and panics. Prevent that.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-12-01 10:13:27 -08:00
Brad Fitzpatrick
d5405c66b7 net/tsdial: start of new package to unify all outbound dialing complexity
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.

Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.

Updates #1713

Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-30 17:21:49 -08:00
Brad Fitzpatrick
3ae6f898cf ipn/ipnlocal, net/dns/resolver: use exit node's DoH proxy when available
Updates #1713

Change-Id: I3695a40ec12d2b4e6dac41cf4559daca6dddd68e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-30 17:01:09 -08:00
Aaron Klotz
f93cf6fa03 net/dns: fix checking for wrapped error when attempting to read wsl.conf for Windows WSL2
Fixes https://github.com/tailscale/tailscale/issues/3437

Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2021-11-30 15:36:39 -07:00
David Anderson
124363e0ca net/dns: detect and decode UTF-16 from wsl.exe earlier.
Fixes #3170

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-30 13:10:18 -08:00
Josh Bleecher Snyder
e16cb523aa net/nettest: deflake TestPipeTimeout
The block-write and block-read tests are both flaky,
because each assumes it can get a normal read/write
completed within 10ms. This isn’t always true.

We can’t increase the timeouts, because that slows down the test.
However, we don’t need to issue a regular read/write for this test.
The immediately preceding tests already test this code,
using a far more generous timeout.

Remove the extraneous read/write.

This drops the failure rate from 1 per 20,000 to undetectable
on my machine.

While we’re here, fix a typo in a debug print statement.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:21:59 -08:00
Josh Bleecher Snyder
a8cc519c70 net/portmapper: improve handling of UPnP parse errors
Without the continue, we might overwrite our current meta
with a zero meta.

Log the error, so that we can check for anything unexpected.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Josh Bleecher Snyder
fddf43f3d1 net/portmapper: fill out PCP/PMP client metrics
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Josh Bleecher Snyder
9787ec6f4a net/portmapper: add UPnP client metrics
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Josh Bleecher Snyder
40f11c50a1 net/portmapper: make PCP/PMP result codes stringers
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Josh Bleecher Snyder
38d90fa330 net/portmapper: add clientmetrics for PCP/PMP responses
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Josh Bleecher Snyder
999814e9e1 net/portmapper: handle pcp ADDRESS_MISMATCH response
These show up a fair amount in our logs.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-30 12:13:15 -08:00
Brad Fitzpatrick
bb91cfeae7 net/socks5/tssocks, wgengine: permit SOCKS through subnet routers/exit nodes
Fixes #1970

Change-Id: Ibef45e8796e1d9625716d72539c96d1dbf7b1f76
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-30 11:54:14 -08:00
David Anderson
a54d13294f net/proxymux: add a listener mux that can run SOCKS and HTTP on a single socket.
Updates #3248

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-29 16:49:48 -08:00
Brad Fitzpatrick
135580a5a8 tailcfg, ipn/ipnlocal, net/dns: forward exit node DNS on Unix to system DNS
Updates #1713

Change-Id: I4c073fec0992d9e01a9a4ce97087d5af0efdc68d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-29 15:25:41 -08:00
Brad Fitzpatrick
78b0bd2957 net/dns/resolver: add clientmetrics for DNS
Fixes tailscale/corp#1811

Change-Id: I864d11e0332a177e8c5ff403591bff6fec548f5a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-26 17:57:48 -08:00
Brad Fitzpatrick
25525b7754 net/dns/resolver, ipn/ipnlocal: wire up peerapi DoH server to DNS forwarder
Updates #1713

Change-Id: Ia4ed9d8c9cef0e70aa6d30f2852eaab80f5f695a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-23 18:59:36 -08:00
Josh Bleecher Snyder
d10cefdb9b net/dns: require space after nameserver/search parsing resolv.conf
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-23 15:11:46 -08:00
Josh Bleecher Snyder
9f00510833 net/dns: handle comments in resolv.conf
Currently, comments in resolv.conf cause our parser to fail,
with error messages like:

ParseIP("192.168.0.100 # comment"): unexpected character (at " # comment")

Fix that.

Noticed while looking through logs.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-23 15:11:46 -08:00
Josh Bleecher Snyder
73beaaf360 net/tstun: rate limit "self disco out packet" logging
When this happens, it is incredibly noisy in the logs.
It accounts for about a third of all remaining
"unexpected" log lines from a recent investigation.

It's not clear that we know how to fix this,
we have a functioning workaround,
and we now have a (cheap and efficient) metric for this
that we can use for measurements.

So reduce the logging to approximately once per minute.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-23 12:52:52 -08:00
Brad Fitzpatrick
283ae702c1 ipn/ipnlocal: start adding DoH DNS server to peerapi when exit node
Updates #1713

Change-Id: I8d9c488f779e7acc811a9bc18166a2726198a429
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-23 08:21:41 -08:00
Josh Bleecher Snyder
ad5e04249b wgengine/monitor: ignore adding/removing uninteresting IPs
One of the most common "unexpected" log lines is:

"network state changed, but stringification didn't"

One way that this can occur is if an interesting interface
(non-Tailscale, has interesting IP address)
gains or loses an uninteresting IP address (link local or loopback).

The fact that the interface is interesting is enough for EqualFiltered
to inspect it. The fact that an IP address changed is enough for
EqualFiltered to declare that the interfaces are not equal.

But the State.String method reasonably declines to print any
uninteresting IP addresses. As a result, the network state appears
to have changed, but the stringification did not.

The String method is correct; nothing interesting happened.

This change fixes this by adding an IP address filter to EqualFiltered
in addition to the interface filter. This lets the network monitor
ignore the addition/removal of uninteresting IP addresses.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-22 16:33:15 -08:00
Josh Bleecher Snyder
ca1b3fe235 net/tshttpproxy: use correct size for Windows BOOL argument
The Windows BOOL type is an int32. We were using a bool,
which is a one byte wide. This could be responsible for the
ERROR_INVALID_PARAMETER errors we were seeing for calls to
WinHttpGetProxyForUrl.

We manually checked all other existing Windows syscalls
for similar mistakes and did not find any.

Updates #879

Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-22 12:24:24 -08:00
Josh Bleecher Snyder
1a629a4715 net/portmapper: mark fewer PMP probe failures as unexpected
There are lots of lines in the logs of the form:

portmapper: unexpected PMP probe response: {OpCode:128 ResultCode:3
SecondsSinceEpoch:NNN MappingValidSeconds:0 InternalPort:0
ExternalPort:0 PublicAddr:0.0.0.0}

ResultCode 3 here means a network failure, e.g. the NAT box itself has
not obtained a DHCP lease. This is not an indication that something
is wrong in the Tailscale client, so use different wording here
to reflect that. Keep logging, so that we can analyze and debug
the reasons that PMP probes fail.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-22 11:13:15 -08:00
David Anderson
88b8a09d37 net/dns: make constants for the various DBus strings.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-19 11:09:32 -08:00
David Anderson
6c82cebe57 health: add a health state for net/dns.OSConfigurator.
Lets the systemd-resolved OSConfigurator report health changes
for out of band config resyncs.

Updates #3327

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-19 11:09:32 -08:00
David Anderson
4ef3fed100 net/dns: resync config to systemd-resolved when it restarts.
Fixes #3327

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-19 11:09:32 -08:00
David Anderson
cf9169e4be net/dns: remove unused Config struct element.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-19 11:09:32 -08:00
Josh Bleecher Snyder
758c37b83d net/netns: thread logf into control functions
So that darwin can log there without panicking during tests.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-11-18 15:09:51 -08:00
Brad Fitzpatrick
cf06f9df37 net/tstun, wgengine: add packet-level and drop metrics
Primarily tstun work, but some MagicDNS stuff spread into wgengine.

No wireguard reconfig metrics (yet).

Updates #3307

Change-Id: Ide768848d7b7d0591e558f118b553013d1ec94ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-17 16:18:52 -08:00
Brad Fitzpatrick
400ed799e6 net/dns: work around old systemd-resolved setLinkDomain length limit
Don't set all the *.arpa. reverse DNS lookup domains if systemd-resolved
is old and can't handle them.

Fixes #3188

Change-Id: I283f8ce174daa8f0a972ac7bfafb6ff393dde41d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-16 12:54:21 -08:00
Brad Fitzpatrick
24ea365d48 netcheck, controlclient, magicsock: add more metrics
Updates #3307

Change-Id: Ibb33425764a75bde49230632f1b472f923551126
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-11-16 10:48:19 -08:00
David Anderson
c5d572f371 net/dns: correctly handle NetworkManager-managed DNS that points to resolved.
Fixes #3304

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-15 12:21:25 -08:00
Maisem Ali
eccc2ac6ee net/interfaces/windows: update Tailscale interface detection logic to
account for new wintun naming.

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-11-08 07:44:33 -08:00
David Anderson
0532eb30db all: replace tailcfg.DiscoKey with key.DiscoPublic.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-11-03 14:00:16 -07:00
Josh Bleecher Snyder
94fb42d4b2 all: use testingutil.MinAllocsPerRun
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.

This also allows us to tighten the "no allocs"
test in wgengine/filter.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-10-28 12:48:37 -07:00
Denton Gentry
5302e4be96 net/portmapper: only print PCP/PMP if VerboseLogs
Make UPnP, NAT-PMP, and PCP packet reception logs be [v1] so
they will never appear on stdout and instead only go to logtail.

```
$ tailscale netcheck
2021/10/15 22:50:31 portmap: Got PMP response; IP: w.x.y.z, epoch: 1012707
2021/10/15 22:50:31 portmap: Got PCP response: epoch: 1012707

Report:
        * UDP: true
        * IPv4: yes, w.x.y.z:1511
        * IPv6: no
        * MappingVariesByDestIP: true
        * HairPinning: false
        * PortMapping: NAT-PMP, PCP
        * Nearest DERP: San Francisco
        * DERP latency:
                - sfo: 5.9ms   (San Francisco)
                - sea: 24ms    (Seattle)
                - dfw: 45ms    (Dallas)
                - ord: 53.7ms  (Chicago)
                - nyc: 74.1ms  (New York City)
                - tok: 111.1ms (Tokyo)
                - lhr: 139.4ms (London)
                - syd: 152.7ms (Sydney)
                - fra: 153.1ms (Frankfurt)
                - sin: 182.1ms (Singapore)
                - sao: 190.1ms (S_o Paulo)
                - blr: 218.6ms (Bangalore)
```

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-10-28 10:18:51 -07:00
David Anderson
060ba86baa net/portmapper: ignore IGD SSDP responses from !defaultgw
Now that we multicast the SSDP query, we can get IGD offers from
devices other than the current device's default gateway. We don't want
to accidentally bind ourselves to those.

Updates #3197

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-10-27 15:34:27 -07:00
David Anderson
4a65b07e34 net/portmapper: also send UPnP SSDP query to the SSDP multicast address.
Fixes #3197

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-10-27 15:02:03 -07:00
Brad Fitzpatrick
b0b0a80318 net/netcheck: implement netcheck for js/wasm clients
And the derper change to add a CORS endpoint for latency measurement.

And a little magicsock change to cut down some log spam on js/wasm.

Updates #3157

Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-27 09:59:31 -07:00
Denton Gentry
139a6c4c9c net/dns: detect when resolvconf points to systemd-resolved.
There are /etc/resolv.conf files out there where resolvconf wrote
the file but pointed to systemd-resolved as the nameserver.
We're better off handling those as systemd-resolved.

> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
> #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
> # 127.0.0.53 is the systemd-resolved stub resolver.
> # run "systemd-resolve --status" to see details about the actual nameservers.

Fixes https://github.com/tailscale/tailscale/issues/3026
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-10-26 18:00:31 -07:00
David Anderson
a320d70614 net/dns: fall back to copy+delete/truncate if moving to/from /etc/resolv.conf fails.
In some containers, /etc/resolv.conf is a bind-mount from outside the container.
This prevents renaming to or from /etc/resolv.conf, because it's on a different
filesystem from linux's perspective. It also prevents removing /etc/resolv.conf,
because doing so would break the bind-mount.

If we find ourselves within this environment, fall back to using copy+delete when
renaming to /etc/resolv.conf, and copy+truncate when renaming from /etc/resolv.conf.

Fixes #3000

Co-authored-by: Denton Gentry <dgentry@tailscale.com>
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-10-26 09:03:37 -07:00
David Anderson
04d24d3a38 net/dns: move directManager function below directManager's definition.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-10-26 09:03:37 -07:00
David Anderson
422ea4980f net/dns: remove a tiny wrapper function that isn't contributing anything.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-10-26 09:03:37 -07:00
Brad Fitzpatrick
a8e2cceefd net/netcheck: hard-code preferred DERP region 900 on js/wasm for now
See TODO in code.

Updates #3157

Change-Id: I3a14dd2cf51d3c21336bb357af5abc362a079ff4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-22 09:08:15 -07:00
Brad Fitzpatrick
9b101bd6af net/tstun: don't compile the code New constructor on js/wasm
Updates #3157

Change-Id: I81603edf3e69e6f1517b0074eef6b648f2981c50
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-21 10:36:30 -07:00
Maxim Merzhanov
9f954628e5 net/dns: ignore UnknownMethod error in SetLinkDefaultRoute for resolved manager
Signed-off-by: Maxim Merzhanov <maksimmerzh@gmail.com>
2021-10-20 16:31:24 -07:00
Brad Fitzpatrick
8efc306e4f net/interfaces: assume the network's up on js/wasm
Updates #3157

Change-Id: If4acd33598ad5e8ef7fb5960964c9ac32bc8f68b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-20 12:23:22 -07:00
Joe Tsai
9af27ba829 cmd/cloner: mangle "go:generate" in cloner.go
The "go generate" command blindly looks for "//go:generate" anywhere
in the file regardless of whether it is truly a comment.
Prevent this false positive in cloner.go by mangling the string
to look less like "//go:generate".

Signed-off-by: Joe Tsai <joetsai@digital-static.net>
2021-10-16 17:53:43 -07:00
Maisem Ali
7817ab6b20 net/dns/resolver: set maxDoHInFlight to 1000 on iOS 15+.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-10-14 23:29:23 -04:00
Brad Fitzpatrick
4a3e2842d9 net/interfaces: add List, GetList
And start moving funcs to methods on List.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-14 15:06:12 -07:00
David Crawshaw
77696579f5 net/dns/resolver: drop dropping log
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-10-14 13:58:24 -07:00
Brad Fitzpatrick
676fb458c3 net/dns/resolver: make hasRDNSBonjourPrefix match shorter queries too
Fixes tailscale/corp#2886
Updates tailscale/corp#2820
Updates #2442

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-13 15:49:45 -07:00
nicksherron
f01ff18b6f all: fix spelling mistakes
Signed-off-by: nicksherron <nsherron90@gmail.com>
2021-10-12 21:23:14 -07:00
Aaron Klotz
1991a1ac6a net/tstun: update tun_windows for wintun 0.14 API revisions, update wireguard-go dependency to 82d2aa87aa623cb5143a41c3345da4fb875ad85d
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
2021-10-12 16:07:46 -06:00
Smitty
b382161fe5 tsdns: don't forward transient DNS errors
When a DNS server claims to be unable or unwilling to handle a request,
instead of passing that refusal along to the client, just treat it as
any other error trying to connect to the DNS server. This prevents DNS
requests from failing based on if a server can respond with a transient
error before another server is able to give an actual response. DNS
requests only failing *sometimes* is really hard to find the cause of
(#1033).

Signed-off-by: Smitty <me@smitop.com>
2021-10-12 09:35:25 -04:00
Denton Gentry
5d6198adee netcheck: don't log ErrGatewayRange
"skipping portmap; gateway range likely lacks support" is really
spammy on cloud systems, and not very useful in debugging.

Fixes https://github.com/tailscale/tailscale/issues/3034

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-10-10 10:47:03 -07:00
Denton Gentry
d883747d8b net/dns/resolver: don't forward DNS-SD on all platforms
We added the initial handling only for macOS and iOS.
With 1.16.0 now released, suppress forwarding DNS-SD
on all platforms to test it through the 1.17.x cycle.

Updates #2442

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-10-08 17:14:59 -07:00
Brad Fitzpatrick
297d1b7cb6 net/dns/resolver: don't forward DNS-SD queries
Updates #2442
Fixes tailscale/corp#2820

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-07 12:38:55 -07:00
Brad Fitzpatrick
47044f3af7 net/dns/resolver: fix log prefix
The passed in logf already has a "dns: " prefix so they were
doubled up.
2021-10-07 12:19:41 -07:00
Brad Fitzpatrick
7634af5c6f all: gofmt
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-07 12:18:31 -07:00
Avery Pennarun
0d4a0bf60e magicsock: if STUN failed to send before, rebind before STUNning again.
On iOS (and possibly other platforms), sometimes our UDP socket would
get stuck in a state where it was bound to an invalid interface (or no
interface) after a network reconfiguration. We can detect this by
actually checking the error codes from sending our STUN packets.

If we completely fail to send any STUN packets, we know something is
very broken. So on the next STUN attempt, let's rebind the UDP socket
to try to correct any problems.

This fixes a problem where iOS would sometimes get stuck using DERP
instead of direct connections until the backend was restarted.

Fixes #2994

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-10-08 02:17:09 +09:00
Brad Fitzpatrick
2501a694cb net/interfaces: add RegisterInterfaceGetter for Android
Updates #2293

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-06 10:43:12 -07:00
Brad Fitzpatrick
22a1a5d7cf ipn/ipnlocal: for IPv6-only nodes, publish IPv6 MagicDNS records of peers
See https://github.com/tailscale/tailscale/issues/2970#issuecomment-931885268

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-04 08:54:23 -07:00
Brad Fitzpatrick
09c2462ae5 net/tlsdial: add forgotten test file for go mod tidy
I forgot to include this file in the earlier
7cf8ec8108 commit.

This exists purely to keep "go mod tidy" happy.

Updates #1609

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-01 10:30:01 -07:00
Brad Fitzpatrick
7cf8ec8108 net/tlsdial: bake in LetsEncrypt's ISRG Root X1 root
We still try the host's x509 roots first, but if that fails (like if
the host is old), we fall back to using LetsEncrypt's root and
retrying with that.

tlsdial was used in the three main places: logs, control, DERP. But it
was missing in dnsfallback. So added it there too, so we can run fine
now on a machine with no DNS config and no root CAs configured.

Also, move SSLKEYLOGFILE support out of DERP. tlsdial is the logical place
for that support.

Fixes #1609

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-10-01 08:30:07 -07:00
Filippo Valsorda
d7ce2be5f4 net/dns/resolver: add unsecured Quad9 resolvers
DNSSEC is an availability issue, as recently demonstrated by the
Slack issue, with limited security advantage. DoH on the other hand
is a critical security upgrade. This change adds DoH support for the
non-DNSSEC endpoints of Quad9.

https://www.quad9.net/service/service-addresses-and-features#unsec
Signed-off-by: Filippo Valsorda <hi@filippo.io>
2021-09-30 18:08:19 -07:00
Brad Fitzpatrick
080381c79f net/tstun: block looped disco traffic, take 17
It was in the wrong filter direction before, per CPU profiles
we now have.

Updates #1526 (maybe fixes? time will tell)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-29 14:17:40 -07:00
Brad Fitzpatrick
173bbaa1a1 all: disable TCP keep-alives on iOS/Android
Updates #2442
Updates tailscale/corp#2750

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-28 12:03:18 -07:00
David Anderson
4cf63b8df0 net/dnsfallback: update static map for new derp11.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-22 15:35:42 -07:00
Denton Gentry
93c2882a2f wgengine: flush DNS cache after major link change.
Windows has a public dns.Flush used in router_windows.go.
However that won't work for platforms like Linux, where
we need a different flush mechanism for resolved versus
other implementations.

We're instead adding a FlushCaches method to the dns Manager,
which can be made to work on all platforms as needed.

Fixes https://github.com/tailscale/tailscale/issues/2132

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-09-19 22:58:53 -07:00
Maxim Merzhanov
d43fcd2f02 net/dns: fix error wrapping for SetLinkDefaultRoute in resolved
Signed-off-by: Maxim Merzhanov <maksimmerzh@gmail.com>
2021-09-16 09:09:13 -07:00
Brad Fitzpatrick
dabeda21e0 net/tstun: block looped disco traffic
Updates #1526 (maybe fixes? time will tell)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-13 16:00:28 -07:00
Brad Fitzpatrick
4f648e6fcc cmd/tailscaled: disable netns earlier in userspace-networking mode
The earlier 382b349c54 was too late,
as engine creation itself needed to listen on things.

Fixes #2827
Updates #2822

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-11 07:11:22 -07:00
Brad Fitzpatrick
382b349c54 cmd/tailscaled: disable netns in userspace-networking mode
Updates #2827
Updates #2822

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-09 15:51:41 -07:00
Brad Fitzpatrick
12dc7c2df8 net/interfaces: remove stray C header file
I meant to delete it as part of 974be2ec5c
when the darwin code was ported from C to Go.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-08 12:01:35 -07:00
Brad Fitzpatrick
640134421e all: update tests to use tstest.MemLogger
And give MemLogger a mutex, as one caller had, which does match the logf
contract better.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-07 20:06:15 -07:00
Brad Fitzpatrick
48bdffd395 net/portmapper: remove GITHUB_ACTIONS check
It's now redundant.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-07 19:28:45 -07:00
Brad Fitzpatrick
7fe6ecf165 ipn/ipnlocal: add MagicDNS records for IPv6-only nodes
Updates #2268

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-07 15:56:13 -07:00
David Crawshaw
9502b515f1 net/dns: replace resolver IPs with type for DoH
We currently plumb full URLs for DNS resolvers from the control server
down to the client. But when we pass the values into the net/dns
package, we throw away any URL that isn't a bare IP. This commit
continues the plumbing, and gets the URL all the way to the built in
forwarder. (It stops before plumbing URLs into the OS configurations
that can handle them.)

For #2596

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-09-07 14:44:26 -07:00
Brad Fitzpatrick
5a58fd8933 net/dnsfallback: go generate, pick up new DERPs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-09-05 17:46:34 -07:00
David Anderson
69c897a763 net/dnsfallback: run go generate to pick up new derp9s.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-05 00:00:16 -07:00
David Anderson
bb6fdfb243 net/dns: fix the build on freebsd (missing default case in switch)
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-05 00:00:16 -07:00
David Anderson
b3b1c06b3a net/dns: only restart systemd-resolved if we changed /etc/resolv.conf.
Reported on IRC: in an edge case, you can end up with a directManager DNS
manager and --accept-dns=false, in which case we should do nothing, but
actually end up restarting resolved whenever the netmap changes, even though
the user told us to not manage DNS.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-05 00:00:16 -07:00
David Anderson
10547d989d net/dns: exhaustively test DNS selection paths for linux.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-04 23:40:48 -07:00
David Anderson
c071bcda33 net/dns: relax systemd-resolved detection.
Reported on IRC: a resolv.conf that contained two entries for
"nameserver 127.0.0.53", which defeated our "is resolved actually
in charge" check. Relax that check to allow any number of nameservers,
as long as they're all 127.0.0.53.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-04 22:32:28 -07:00
David Anderson
39748e9562 net/dns/resolver: authoritatively return NXDOMAIN for reverse zones we own.
Fixes #2774

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-09-01 18:11:32 -07:00
Emmanuel T Odeke
0daa32943e all: add (*testing.B).ReportAllocs() to every benchmark
This ensures that we can properly track and catch allocation
slippages that could otherwise have been missed.

Fixes #2748
2021-08-30 21:41:04 -07:00
Brad Fitzpatrick
065c4ffc2c net/dns: add start of Linux newOSConfigurator tests
Only one test case so far.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-30 14:16:12 -07:00
Brad Fitzpatrick
09a47ea3f1 net/dns: prep for writing manager_linux tests; pull some stuff out
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-30 13:49:02 -07:00
Brad Fitzpatrick
3606e68721 net/interfaces: fix default route lookup on Windows
It wasn't using the right metric. Apparently you're supposed to sum the route
metric and interface metric. Whoops.

While here, optimize a few little things too, not that this code
should be too hot.

Fixes #2707 (at least; probably dups but I'm failing to find)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-26 13:42:20 -07:00
David Anderson
b49d9bc74d net/portmapper: fix "running a test" condition.
Fixes #2686.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-08-25 20:16:35 -07:00
slowy07
ac0353e982 fix: typo spelling grammar
Signed-off-by: slowy07 <slowy.arfy@gmail.com>
2021-08-24 07:55:04 -07:00
David Crawshaw
0ac2130590 net/dns: resolveConfExists reading the wrong error
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-08-21 20:15:51 -07:00
Brad Fitzpatrick
36ffd509de net/dns: avoid Linux PolicyKit GUI dialog during tests
Fixes #2672

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-19 08:58:47 -07:00
Maisem Ali
1f006025c2 net/tstun: fix build on arm
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2021-08-18 15:28:14 -07:00
Brad Fitzpatrick
cd426eaf4c net/portmapper: fix t.Log-after-test-done race in tests
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-18 14:39:45 -07:00
Matt Layher
8ab44b339e net/tstun: use unix.Ifreq type for Linux TAP interface configuration
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-08-17 12:17:51 -07:00
Josh Bleecher Snyder
a24cee0d67 all: simplify ts_macext build tags
Now that we have the easier-to-parse go:build build tags,
it is straightforward to simplify them. Yay.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-17 11:13:03 -07:00
Brad Fitzpatrick
833200da6f net/tstun: don't exec uname -r on Linux in TUN failure diagnostics
Fixes https://twitter.com/zekjur/status/1425557520513486848

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-16 12:18:40 -07:00
Brad Fitzpatrick
e804ab29fd net/tstun: move TUN failure diagnostics to OS-specific files
Mostly so the Linux one can use Linux-specific stuff in package
syscall and not use os/exec for uname for portability.

But also it helps deps a tiny bit on iOS.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-16 11:24:25 -07:00
julianknodt
b9bd7dbc5d net/portmapper: log upnp information
This logs some basic statistics for UPnP, so that tailscale can better understand what routers
are being used and how to connect to them.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-10 22:45:00 -07:00
julianknodt
26b6fe7f02 net/portmapper: add PCP integration test
This adds a PCP test to the IGD test server, by hardcoding in a few observed packets from
Denton's box.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-10 15:14:46 -07:00
Brad Fitzpatrick
bdb93c5942 net/portmapper: actually test something in TestProbeIntegration
And use dynamic port numbers in tests, as Linux on GitHub Actions and
Windows in general have things running on these ports.

Co-Author: Julian Knodt <julianknodt@gmail.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-09 19:49:02 -07:00
Adrian Dewhurst
8bdf878832 net/dns/resolver: use forwarded dns txid directly
Previously, we hashed the question and combined it with the original
txid which was useful when concurrent queries were multiplexed on a
single local source port. We encountered some situations where the DNS
server canonicalizes the question in the response (uppercase converted
to lowercase in this case), which resulted in responses that we couldn't
match to the original request due to hash mismatches. This includes a
new test to cover that situation.

Fixes #2597

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-08-06 14:56:11 -04:00
Brad Fitzpatrick
e6d4ab2dd6 net/portmapper: add start of self-contained portmapper integration tests
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-06 08:34:45 -07:00
julianknodt
98d36ee18d net/portmapper: add hook for use with prev ip
PCP handles external IPs by allowing the client to specify them in the packet, which is more
explicit than requiring 2 packets from PMP, so allow for future changes to add it in easily.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-06 07:51:30 -07:00
julianknodt
85304d7392 net/portmapper: check disable flags
Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-06 07:51:30 -07:00
julianknodt
777b711d96 net/portmapper: add pcp portmapping
This adds PCP portmapping, hooking into the existing PMP portmapping.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-06 07:51:30 -07:00
julianknodt
5c98b1b8d0 net/portmapper: move pcp code to separate file
This moves all the PCP code to a separate file in preparation for portmapping with PCP.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-08-06 07:51:30 -07:00
Josh Bleecher Snyder
a5da4ed981 all: gofmt with Go 1.17
This adds "//go:build" lines and tidies up existing "// +build" lines.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-08-05 15:54:00 -07:00
Brad Fitzpatrick
a729070252 net/tstun: add start of Linux TAP support, with DHCP+ARP server
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.

Updates #2589

Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-05 10:01:45 -07:00
Brad Fitzpatrick
fdc081c291 net/portmapper: fix UPnP probing, work against all ports
Prior to Tailscale 1.12 it detected UPnP on any port.
Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports.

Then start plumbing its discovered Location header port number to the
code that was assuming port 5000.

Fixes #2109

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-04 12:49:49 -07:00
Denton Gentry
260b85458c net/dns: correct log message.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-08-03 13:58:29 -07:00
Brad Fitzpatrick
54e33b511a net/dns/resolver: add test that I forgot to git add earlier
This was meant to be part of 53a2f63658 earlier
but I guess I failed at git.

Updates #2436
Updates tailscale/corp#2250
Updates tailscale/corp#2238

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-03 08:32:18 -07:00
Brad Fitzpatrick
be921d1a95 net/dns/resolver: fix skipped DoH test that bitrot
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-08-02 15:26:27 -07:00
Brad Fitzpatrick
5a7ff2b231 net/dnsfallback: re-run go generate 2021-08-01 19:14:33 -07:00
Matt Layher
effee49e45 net/interfaces: explicitly check netaddr.IP.Is6 in isUsableV6
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-07-30 19:56:11 -07:00
Matt Layher
3ff8a55fa7 net/tsaddr: remove IsULA, replace with netaddr.IP.IsPrivate
Signed-off-by: Matt Layher <mdlayher@gmail.com>
2021-07-30 19:56:11 -07:00
Josh Bleecher Snyder
c2202cc27c net/tstun: use mono.Time
There's a call to Now once per packet.
Move to mono.Now.

Though the current implementation provides high precision,
we document it to be coarse, to preserve the ability
to switch to a coarse monotonic time later.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-29 12:56:58 -07:00
Josh Bleecher Snyder
881bb8bcdc net/dns/resolver: allow an extra alloc for go closure allocation
Go 1.17 switches to a register ABI on amd64 platforms.
Part of that switch is that go and defer calls use an argument-less
closure, which allocates. This means that we have an extra
alloc in some DNS work. That's unfortunate but not a showstopper,
and I don't see a clear path to fixing it.
The other performance benefits from the register ABI will all
but certainly outweigh this extra alloc.

Fixes #2545

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-29 12:56:28 -07:00
Brad Fitzpatrick
b6179b9e83 net/dnsfallback: add new nodes
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-29 10:50:49 -07:00
David Crawshaw
f414a9cc01 net/dns/resolver: EDNS OPT record off-by-one
I don't know how to get access to a real packet. Basing this commit
entirely off:

       +------------+--------------+------------------------------+
       | Field Name | Field Type   | Description                  |
       +------------+--------------+------------------------------+
       | NAME       | domain name  | MUST be 0 (root domain)      |
       | TYPE       | u_int16_t    | OPT (41)                     |
       | CLASS      | u_int16_t    | requestor's UDP payload size |
       | TTL        | u_int32_t    | extended RCODE and flags     |
       | RDLEN      | u_int16_t    | length of all RDATA          |
       | RDATA      | octet stream | {attribute,value} pairs      |
       +------------+--------------+------------------------------+

From https://datatracker.ietf.org/doc/html/rfc6891#section-6.1.2

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-07-27 16:39:27 -07:00
Josh Bleecher Snyder
1034b17bc7 net/tstun: buffer outbound channel
The handoff between tstun.Wrap's Read and poll methods
is one of the per-packet hotspots. It shows up in pprof.

Making outbound buffered increases throughput.

It is hard to measure exactly how much, because the numbers
are highly variable, but I'd estimate it at about 1%,
using the best observed max throughput across three runs.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-27 15:54:34 -07:00
Josh Bleecher Snyder
965dccd4fc net/tstun: buffer outbound channel
The handoff between tstun.Wrap's Read and poll methods
is one of the per-packet hotspots. It shows up in pprof.

Making outbound buffered increases throughput.

It is hard to measure exactly how much, because the numbers
are highly variable, but I'd estimate it at about 1%,
using the best observed max throughput across three runs.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-27 15:54:34 -07:00
Brad Fitzpatrick
68df379a7d net/portmapper: rename ErrGatewayNotFound to ErrGatewayRange, reword text
It confused & scared people. And it was just bad.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-26 20:30:28 -07:00
Brad Fitzpatrick
aaf2df7ab1 net/{dnscache,interfaces}: use netaddr.IP.IsPrivate, delete copied code
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-26 20:30:28 -07:00
Brad Fitzpatrick
c17d743886 net/dnscache: update a comment
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-26 16:16:08 -07:00
Brad Fitzpatrick
281d503626 net/dnscache: make Dialer try all resolved IPs
Tested manually with:

$ go test -v ./net/dnscache/ -dial-test=bogusplane.dev.tailscale.com:80

Where bogusplane has three A records, only one of which works.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-26 15:44:32 -07:00
Brad Fitzpatrick
e299300b48 net/dnscache: cache all IPs per hostname
Not yet used in the dialer, but plumbed around.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-26 12:27:46 -07:00
Brad Fitzpatrick
53a2f63658 net/dns/resolver: race well-known resolvers less aggressively
Instead of blasting away at all upstream resolvers at the same time,
make a timing plan upon reconfiguration and have each upstream have an
associated start delay, depending on the overall forwarding config.

So now if you have two or four upstream Google or Cloudflare DNS
servers (e.g. two IPv4 and two IPv6), we now usually only send a
query, not four.

This is especially nice on iOS where we start fewer DoH queries and
thus fewer HTTP/1 requests (because we still disable HTTP/2 on iOS),
fewer sockets, fewer goroutines, and fewer associated HTTP buffers,
etc, saving overall memory burstiness.

Fixes #2436
Updates tailscale/corp#2250
Updates tailscale/corp#2238

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-25 20:45:47 -07:00
Brad Fitzpatrick
e94ec448a7 net/dns/resolver: add forwardQuery type as race work prep
Add a place to hang state in a future change for #2436.
For now this just simplifies the send signature without
any functional change.

Updates #2436

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-25 15:43:49 -07:00
Brad Fitzpatrick
064b916b1a net/dns/resolver: fix func used as netaddr.IP in printf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-25 15:21:51 -07:00
Brad Fitzpatrick
7b295f3d21 net/portmapper: disable UPnP on iOS for now
Updates #2495

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-22 13:33:38 -07:00
Brad Fitzpatrick
cecfc14875 net/dns: don't build init*.go on non-windows
To remove the regexp dep on iOS, notably.

Updates tailscale/corp#2238

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-22 11:58:42 -07:00
Brad Fitzpatrick
2968893add net/dns/resolver: bound DoH usage on iOS
Updates tailscale/corp#2238

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-22 10:54:24 -07:00
Brad Fitzpatrick
3daf27eaad net/dns/resolver: fall back to IPv6 for well-known DoH servers if v4 fails
Should help with IPv6-only environments when the tailnet admin
only specified IPv4 DNS IPs.

See https://github.com/tailscale/tailscale/issues/2447#issuecomment-884188562

Co-Author: Adrian Dewhurst <adrian@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-21 12:45:25 -07:00
Brad Fitzpatrick
74eee4de1c net/dns/resolver: use correct Cloudflare DoH hostnames
We were using the wrong ones for the malware & adult content
variants. Docs:

https://developers.cloudflare.com/1.1.1.1/1.1.1.1-for-families/setup-instructions/dns-over-https

Earlier commit which added them:
236eb4d04d

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-21 12:24:36 -07:00
julianknodt
3a4201e773 net/portmapper: return correct upnp port
Previously, this was incorrectly returning the internal port, and using that with the external
exposed IP when it did not use WANIPConnection2. In the case when we must provide a port, we
return it instead.

Noticed this while implementing the integration test for upnp.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-07-21 10:11:47 -07:00
Brad Fitzpatrick
e74d37d30f net/dns{,/resolver}: quiet DNS output logging
It was a huge chunk of the overall log output and made debugging
difficult. Omit and summarize the spammy *.arpa parts instead.

Fixes tailscale/corp#2066 (to which nobody had opinions, so)
2021-07-19 22:24:43 -07:00
Josh Bleecher Snyder
84a6dcd9a9 net/dnsfallback: regenerate
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-19 15:31:56 -07:00
Brad Fitzpatrick
171ec9f8f4 control/{controlknobs,controlclient}: simplify knobs API, fix controlclient crash
From integration tests elsewhere:

panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x70 pc=0x845c9b]

goroutine 226 [running]:
tailscale.com/control/controlclient.(*Direct).sendMapRequest(0xc00053e1e0, 0x16670f0, 0xc000353780, 0xffffffffffffffff, 0xc0003e5f10, 0x0, 0x0)
   /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:803 +0x19bb
tailscale.com/control/controlclient.(*Direct).PollNetMap(...)
   /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/direct.go:574
tailscale.com/control/controlclient.(*Auto).mapRoutine(0xc00052a1e0)
   /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:464 +0x571
created by tailscale.com/control/controlclient.(*Auto).Start
   /home/runner/go/pkg/mod/tailscale.com@v1.1.1-0.20210715222212-1bb6abc604c1/control/controlclient/auto.go:151 +0x65
exit status 2

Also remove types/opt.Bool API addition which is now unnecessary.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-15 22:34:50 -07:00
julianknodt
1bb6abc604 net/portmapper: add upnp port mapping
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.

RELNOTE=portmapper now supports UPnP mappings

Fixes #682
Updates #2109

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-07-15 15:22:12 -07:00
Brad Fitzpatrick
236eb4d04d net/dns/resolver: upgrade forwarded MagicDNS queries to DoH when IP known
Recognize Cloudflare, Google, Quad9 which are by far the
majority of upstream DNS servers that people use.

RELNOTE=MagicDNS now uses DNS-over-HTTPS when querying popular upstream resolvers,
so DNS queries aren't sent in the clear over the Internet.

Updates #915 (might fix it?)
Updates #988 (gets us closer, if it fixes Android)
Updates #74 (not yet configurable, but progress)
Updates #2056 (not yet configurable, dup of #74?)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-15 12:03:52 -07:00
Aaditya Chaudhary
4f89fe17a2
Implemented Commandline Download Speedtest (#2064)
Added the net/speedtest package that contains code for starting up a
speedtest server and a client. The speedtest command for starting a
client takes in a duration for the speedtest as well as the host and
port of the speedtest server to connect to. The speedtest command for
starting a server takes in a host:port pair to listen on.

Signed-off-by: Aaditya Chaudhary <32117362+AadityaChaudhary@users.noreply.github.com>
2021-07-15 14:43:13 -04:00
Denton Gentry
e28bc49e5f netns_linux: remove special handling for tests.
With netns handling localhost now, existing tests no longer
need special handling. The tests set up their connections to
localhost, and the connections work without fuss.

Remove the special handling for tests.

Also remove the hostinfo.TestCase support, since this was
the only use of it. It can be added back later if really
needed, but it would be better to try to make tests work
without special cases.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Denton Gentry
d2480fd508 net/netns: support !CAP_NET_ADMIN
netns_linux checked whether "ip rule" could run to determine
whether to use SO_MARK for network namespacing. However in
Linux environments which lack CAP_NET_ADMIN, such as various
container runtimes, the "ip rule" command succeeds but SO_MARK
fails due to lack of permission. SO_BINDTODEVICE would work in
these environments, but isn't tried.

In addition to running "ip rule" check directly whether SO_MARK
works or not. Among others, this allows Microsoft Azure App
Service and AWS App Runner to work.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Denton Gentry
1896bf99d9 netns_linux: No namespace for localhost.
Connections to a control server or log server on localhost,
used in a number of tests, are working right now because the
calls to SO_MARK in netns fail for non-root but then we ignore
the failure when running in tests.

Unfortunately that failure in SO_MARK also affects container
environments without CAP_NET_ADMIN, breaking Tailscale
connectivity. We're about to fix netns to recognize when SO_MARK
doesn't work and use SO_BINDTODEVICE instead. Doing so makes
tests fail, as their sockets now BINDTODEVICE of the default
route and cannot connect to localhost.

Add support to skip namespacing for localhost connections,
which Darwin and Windows already do. This is not conditional
on running within a test, if you tell tailscaled to connect
to localhost it will automatically use a non-namespaced
socket to do so.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Denton Gentry
61622b18fa net/interface: add AWS App Runner /proc/net/route test
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-07-14 10:01:14 -07:00
Brad Fitzpatrick
92077ae78c wgengine/magicsock: make portmapping async
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-09 11:15:26 -07:00
Brad Fitzpatrick
440566c5d2 net/interfaces: trim getPACWindows whitespace before parsing URL
Fixes #2357

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-07-08 11:26:50 -07:00
Josh Bleecher Snyder
0ad92b89a6 net/tstun: fix data races
To remove some multi-case selects, we intentionally allowed
sends on closed channels (cc23049cd2).

However, we also introduced concurrent sends and closes,
which is a data race.

This commit fixes the data race. The mutexes here are uncontended,
and thus very cheap.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-07 16:15:29 -07:00
Josh Bleecher Snyder
c35a832de6 net/tstun: add inner loop to poll
This avoids re-enqueuing to t.bufferConsumed,
which makes the code a bit clearer.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-02 11:02:12 -07:00
Josh Bleecher Snyder
a4cc7b6d54 net/tstun: simplify code
Calculate whether the packet is injected directly,
rather than via an else branch.

Unify the exit paths. It is easier here than duplicating them.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-02 11:02:12 -07:00
Josh Bleecher Snyder
cc23049cd2 net/tstun: remove multi-case selects from hot code
Every TUN Read went through several multi-case selects.
We know from past experience with wireguard-go that these are slow
and cause scheduler churn.

The selects served two purposes: they separated errors from data and
gracefully handled shutdown. The first is fairly easy to replace by sending
errors and data over a single channel. The second, less so.

We considered a few approaches: Intricate webs of channels,
global condition variables. They all get ugly fast.

Instead, let's embrace the ugly and handle shutdown ungracefully.
It's horrible, but the horror is simple and localized.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-07-02 11:02:12 -07:00
David Crawshaw
6b9f8208f4 net/dns: do not run wsl.exe as LocalSystem
It doesn't work. It needs to run as the user.

	https://github.com/microsoft/WSL/issues/4803

The mechanism for doing this was extracted from:

	https://web.archive.org/web/20101009012531/http://blogs.msdn.com/b/winsdk/archive/2009/07/14/launching-an-interactive-process-from-windows-service-in-windows-vista-and-later.aspx

While here, we also reclaculate WSL distro set on SetDNS.
This accounts for:

	1. potential inability to access wsl.exe on startup
	2. WSL being installed while Tailscale is running
	3. A new WSL distrobution being installed

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-30 10:11:33 -07:00
David Crawshaw
1147c7fd4f net/dns: set WSL /etc/resolv.conf
We also have to make a one-off change to /etc/wsl.conf to stop every
invocation of wsl.exe clobbering the /etc/resolv.conf. This appears to
be a safe change to make permanently, as even though the resolv.conf is
constantly clobbered, it is always the same stable internal IP that is
set as a nameserver. (I believe the resolv.conf clobbering predates the
MS stub resolver.)

Tested on WSL2, should work for WSL1 too.

Fixes #775

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-28 14:18:15 -07:00
David Crawshaw
9b063b86c3 net/dns: factor directManager out over an FS interface
This is preliminary work for using the directManager as
part of a wslManager on windows, where in addition to configuring
windows we'll use wsl.exe to edit the linux file system and modify the
system resolv.conf.

The pinholeFS is a little funky, but it's designed to work through
simple unix tools via wsl.exe without invoking bash. I would not have
thought it would stand on its own like this, but it turns out it's
useful for writing a test for the directManager.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-28 14:18:15 -07:00
Brad Fitzpatrick
15677d8a0e net/socks5/tssocks: add a SOCKS5 dialer type, method-ifying code
https://twitter.com/bradfitz/status/1409605220376580097

Prep for #1970, #2264, #2268

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-28 13:12:42 -07:00
Brad Fitzpatrick
3910c1edaf net/socks5/tssocks: add new package, move SOCKS5 glue out of tailscaled
Prep for #1970, #2264, #2268

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-28 11:34:50 -07:00
David Crawshaw
d6f4b5f5cb ipn, etc: use controlplane.tailscale.com
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-28 09:38:23 -07:00
julianknodt
72a0b5f042 net/dns/resolver: fmt item
This has been bothering me for a while, but everytime I run format from the root directory
it also formats this file. I didn't want to add it to my other PRs but it's annoying to have to
revert it every time.

Signed-off-by: julianknodt <julianknodt@gmail.com>
2021-06-27 23:57:55 -07:00
Brad Fitzpatrick
10d7c2583c net/dnsfallback: don't depend on derpmap.Prod
Move derpmap.Prod to a static JSON file (go:generate'd) instead,
to make its role explicit. And add a TODO about making dnsfallback
use an update-over-time DERP map file instead of a baked-in one.

Updates #1264

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-27 22:07:40 -07:00
David Crawshaw
80b1308974 net/dns: remove ref to managerImpl
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-25 07:06:23 -07:00
Adrian Dewhurst
bcaae3e074 net/dns/resolver: clamp EDNS size
This change (subject to some limitations) looks for the EDNS OPT record
in queries and responses, clamping the size field to fit within our DNS
receive buffer. If the size field is smaller than the DNS receive buffer
then it is left unchanged.

I think we will eventually need to transition to fully processing the
DNS queries to handle all situations, but this should cover the most
common case.

Mostly fixes #2066

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-06-25 08:56:34 -04:00
Brad Fitzpatrick
7b8ed1fc09 net/netns: add Android implementation, allowing registration of JNI hook
Updates #2102
Updates #1809

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-24 12:50:47 -07:00
Brad Fitzpatrick
3d777c13b0 net/socks5: fix a typo
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-23 22:12:17 -07:00
David Anderson
084d48d22d net/dns: always proxy through quad-100 on windows 8.1.
Windows 8.1 incorrectly handles search paths on an interface with no
associated resolver, so we have to provide a full primary DNS config
rather than use Windows 8.1's nascent-but-present NRPT functionality.

Fixes #2237.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-23 17:50:19 -07:00
Brad Fitzpatrick
45e64f2e1a net/dns{,/resolver}: refactor DNS forwarder, send out of right link on macOS/iOS
Fixes #2224
Fixes tailscale/corp#2045

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-23 16:04:10 -07:00
Brad Fitzpatrick
733d52827b net/dns/resolver: skip test on macOS
Fixes #2229

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-23 08:13:55 -07:00
Denton Gentry
ad288baaea net/interfaces: use IPv4 link local if nothing better
The only connectivity an AWS Lambda container has is an IPv4 link-local
169.254.x.x address using NAT:
12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
                    qdisc noqueue state UP group default qlen 1000
     link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1
     inet 169.254.79.1/32 scope global vtarget_1
     valid_lft forever preferred_lft forever

If there are no other IPv4/v6 addresses available, and we are running
in AWS Lambda, allow IPv4 169.254.x.x addresses to be used.

----

Similarly, a Google Cloud Run container's only connectivity is
a Unique Local Address fddf:3978:feb1:d745::c001/128.
If there are no other addresses available then allow IPv6
Unique Local Addresses to be used.
We actually did this in an earlier release, but now refactor it to
work the same way as the IPv4 link-local support is being done.

Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-06-18 21:52:47 -07:00
David Crawshaw
297b3d6fa4 staticcheck.conf: turn off noisy lint errors
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2021-06-18 15:48:20 -07:00
Brad Fitzpatrick
1ae35b6c59 net/{interfaces,netcheck}: rename some fields, funcs
Split out of Denton's #2164, to make that diff smaller to review.

This change has no behavior changes.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-17 17:50:13 -07:00
David Anderson
9337826011 net/dns: fix inverted test for NetworkManager version.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-15 20:53:03 -07:00
David Anderson
320cc8fa21 net/dns: verify that systemd-resolved is actually in charge.
It's possible to install a configuration that passes our current checks
for systemd-resolved, without actually pointing to systemd-resolved. In
that case, we end up programming DNS in resolved, but that config never
applies to any name resolution requests on the system.

This is quite a far-out edge case, but there's a simple additional check
we can do: if the header comment names systemd-resolved, there should be
a single nameserver in resolv.conf pointing to 127.0.0.53. If not, the
configuration should be treated as an unmanaged resolv.conf.

Fixes #2136.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-15 19:52:02 -07:00
David Anderson
e7164425b3 net/dns: don't use NetworkManager for DNS on very old NetworkManagers.
Fixes #1945.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-15 15:34:35 -07:00
Dave Anderson
144c68b80b
net/dns: avoid using NetworkManager as much as possible. (#1945)
Addresses #1699 as best as possible.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-10 10:46:08 -04:00
Adrian Dewhurst
8b11937eaf net/dns/resolver: permit larger max responses, signal truncation
This raises the maximum DNS response message size from 512 to 4095. This
should be large enough for almost all situations that do not need TCP.
We still do not recognize EDNS, so we will still forward requests that
claim support for a larger response size than 4095 (that will be solved
later). For now, when a response comes back that is too large to fit in
our receive buffer, we now set the truncation flag in the DNS header,
which is an improvement from before but will prompt attempts to use TCP
which isn't supported yet.

On Windows, WSARecvFrom into a buffer that's too small returns an error
in addition to the data. On other OSes, the extra data is silently
discarded. In this case, we prefer the latter so need to catch the error
on Windows.

Partially addresses #1123

Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
2021-06-08 19:29:12 -04:00
David Anderson
7fab244614 net/dns/resolver: don't spam logs on EHOSTUNREACH.
Fixes #1719.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-06-07 10:45:29 -07:00
David Anderson
df8a5d09c3 net/tstun: add a debug envvar to override tun MTU.
Signed-off-by: David Anderson <dave@natulte.net>
2021-06-04 11:55:11 -07:00
Brad Fitzpatrick
713c5c9ab1 net/{interfaces,netns}: change which build tag means mac/ios Network/System Extension
We used to use "redo" for that, but it was pretty vague.

Also, fix the build tags broken in interfaces_default_route_test.go from
a9745a0b68, moving those Linux-specific
tests to interfaces_linux_test.go.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-03 08:29:22 -07:00
Brad Fitzpatrick
a321c24667 go.mod: update netaddr
Involves minor IPSetBuilder.Set API change.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-06-02 09:05:06 -07:00
Brad Fitzpatrick
ca455ac84b net/tsaddr: simplify TailscaleServiceIP
netaddr allocated at the time this was written. No longer.

name                    old time/op  new time/op  delta
TailscaleServiceAddr-4  5.46ns ± 4%  1.83ns ± 3%  -66.52%  (p=0.008 n=5+5)

A bunch of the others can probably be simplified too, but this
was the only one with just an IP and not an IPPrefix.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-28 20:36:26 -07:00
Josh Bleecher Snyder
1ece91cede go.mod: upgrade wireguard-windows, de-fork wireguard-go
Pull in the latest version of wireguard-windows.

Switch to upstream wireguard-go.
This requires reverting all of our import paths.

Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-25 13:18:21 -07:00
Josh Bleecher Snyder
5666663370 net/packet: use netaddr AppendTo methods
This lets us remote the types/strbuilder package,
which had only a single user.
And it's faster.

name              old time/op    new time/op    delta
String/tcp4-8        175ns ± 0%      58ns ± 1%  -66.95%  (p=0.000 n=10+9)
String/tcp6-8        226ns ± 1%     136ns ± 1%  -39.85%  (p=0.000 n=10+10)
String/udp4-8        175ns ± 1%      58ns ± 1%  -67.01%  (p=0.000 n=10+9)
String/udp6-8        230ns ± 1%     140ns ± 0%  -39.32%  (p=0.000 n=10+9)
String/icmp4-8       164ns ± 0%      50ns ± 1%  -69.89%  (p=0.000 n=10+10)
String/icmp6-8       217ns ± 1%     129ns ± 0%  -40.46%  (p=0.000 n=10+10)
String/igmp-8        196ns ± 0%      56ns ± 1%  -71.32%  (p=0.000 n=10+10)
String/unknown-8    2.06ns ± 1%    2.06ns ± 2%     ~     (p=0.985 n=10+10)

name              old alloc/op   new alloc/op   delta
String/tcp4-8        32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/tcp6-8         168B ± 0%       96B ± 0%  -42.86%  (p=0.000 n=10+10)
String/udp4-8        32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/udp6-8         168B ± 0%       96B ± 0%  -42.86%  (p=0.000 n=10+10)
String/icmp4-8       32.0B ± 0%     32.0B ± 0%     ~     (all equal)
String/icmp6-8        104B ± 0%       64B ± 0%  -38.46%  (p=0.000 n=10+10)
String/igmp-8        48.0B ± 0%     48.0B ± 0%     ~     (all equal)
String/unknown-8     0.00B          0.00B          ~     (all equal)

name              old allocs/op  new allocs/op  delta
String/tcp4-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/tcp6-8         3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/udp4-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/udp6-8         3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/icmp4-8        1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/icmp6-8        3.00 ± 0%      1.00 ± 0%  -66.67%  (p=0.000 n=10+10)
String/igmp-8         1.00 ± 0%      1.00 ± 0%     ~     (all equal)
String/unknown-8      0.00           0.00          ~     (all equal)

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-20 20:42:18 -07:00
Josh Bleecher Snyder
d6d1951897 net/packet: add BenchmarkString
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-20 20:42:18 -07:00
David Anderson
e2dcf63420 net/dns: replace AuthoritativeSuffixes with nil Route entries.
This leads to a cleaner separation of intent vs. implementation
(Routes is now the only place specifying who handles DNS requests),
and allows for cleaner expression of a configuration that creates
MagicDNS records without serving them to the OS.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-05-18 14:15:17 -07:00
David Anderson
6690f86ef4 net/dns: always offer MagicDNS records at 100.100.100.100.
Fixes #1886.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-05-18 14:15:17 -07:00
Josh Bleecher Snyder
25df067dd0 all: adapt to opaque netaddr types
This commit is a mishmash of automated edits using gofmt:

gofmt -r 'netaddr.IPPort{IP: a, Port: b} -> netaddr.IPPortFrom(a, b)' -w .
gofmt -r 'netaddr.IPPrefix{IP: a, Port: b} -> netaddr.IPPrefixFrom(a, b)' -w .

gofmt -r 'a.IP.Is4 -> a.IP().Is4' -w .
gofmt -r 'a.IP.As16 -> a.IP().As16' -w .
gofmt -r 'a.IP.Is6 -> a.IP().Is6' -w .
gofmt -r 'a.IP.As4 -> a.IP().As4' -w .
gofmt -r 'a.IP.String -> a.IP().String' -w .

And regexps:

\w*(.*)\.Port = (.*)  ->  $1 = $1.WithPort($2)
\w*(.*)\.IP = (.*)  ->  $1 = $1.WithIP($2)

And lots of manual fixups.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-16 14:52:00 -07:00
David Anderson
cfde997699 net/dns: don't use interfaces.Tailscale to find the tailscale interface index.
interfaces.Tailscale only returns an interface if it has at least one Tailscale
IP assigned to it. In the resolved DNS manager, when we're called upon to tear
down DNS config, the interface no longer has IPs.

Instead, look up the interface index on construction and reuse it throughout
the daemon lifecycle.

Fixes #1892.

Signed-off-by: David Anderson <dave@natulte.net>
2021-05-10 15:24:42 -07:00
Brad Fitzpatrick
3173c5a65c net/interface: remove darwin fetchRoutingTable workaround
Fixed upstream. Bump dep.

Updates #1345

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-10 08:24:11 -07:00
David Anderson
3c8e230ee1 Revert "net/dns: set IPv4 auto mode in NM, so it lets us set DNS."
This reverts commit 7d16c8228b.

I have no idea how I ended up here. The bug I was fixing with this change
fails to reproduce on Ubuntu 18.04 now, and this change definitely does
break 20.04, 20.10, and Debian Buster. So, until we can reliably reproduce
the problem this was meant to fix, reverting.

Part of #1875

Signed-off-by: David Anderson <dave@natulte.net>
2021-05-06 22:31:54 -07:00
David Anderson
5bd38b10b4 net/dns: log the correct error when NM Reapply fails.
Found while debugging #1870.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-05-06 16:02:09 -07:00
David Anderson
7d16c8228b net/dns: set IPv4 auto mode in NM, so it lets us set DNS.
Part of #1870.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-05-06 16:02:09 -07:00
David Anderson
77e2375501 net/dns: don't try to configure LLMNR or mdns in NetworkManager.
Fixes #1870.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-05-06 16:02:09 -07:00
Brad Fitzpatrick
7f2eb1d87a net/tstun: fix TUN log spam when ACLs drop a packet
Whenever we dropped a packet due to ACLs, wireguard-go was logging:

Failed to write packet to TUN device: packet dropped by filter

Instead, just lie to wireguard-go and pretend everything is okay.

Fixes #1229

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-06 06:42:58 -07:00
Brad Fitzpatrick
7629cd6120 net/tsaddr: add NewContainsIPFunc (move from wgengine)
I want to use this from netstack but it's not exported.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-05-05 13:15:50 -07:00
Josh Bleecher Snyder
42c8b9ad53 net/tstun: remove unnecessary break statement
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-05-04 08:54:50 -07:00
Brad Fitzpatrick
3237e140c4 tstest/integration: add testNode.AwaitListening, DERP+STUN, improve proxy trap
Updates #1840
2021-05-03 12:14:20 -07:00
Josh Bleecher Snyder
20e04418ff net/dns: add GOOS build tags
Fixes #1786

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-29 21:34:55 -07:00
David Anderson
bf9ef1ca27 net/dns: stop NetworkManager breaking v6 connectivity when setting DNS.
Tentative fix for #1699

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-29 12:25:47 -07:00
David Anderson
72b6d98298 net/interfaces: return all Tailscale addresses from Tailscale().
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-29 12:25:47 -07:00
David Anderson
44c2b7dc79 net/dns: on windows, skip site-local v6 resolvers.
Further refinement for tailscale/corp#1662.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-27 18:24:54 -07:00
Josh Bleecher Snyder
99705aa6b7 net/tstun: split TUN events channel into up/down and MTU
We had a long-standing bug in which our TUN events channel
was being received from simultaneously in two places.

The first is wireguard-go.

At wgengine/userspace.go:366, we pass e.tundev to wireguard-go,
which starts a goroutine (RoutineTUNEventReader)
that receives from that channel and uses events to adjust the MTU
and bring the device up/down.

At wgengine/userspace.go:374, we launch a goroutine that
receives from e.tundev, logs MTU changes, and triggers
state updates when up/down changes occur.

Events were getting delivered haphazardly between the two of them.

We don't really want wireguard-go to receive the up/down events;
we control the state of the device explicitly by calling device.Up.
And the userspace.go loop MTU logging duplicates logging that
wireguard-go does when it received MTU updates.

So this change splits the single TUN events channel into up/down
and other (aka MTU), and sends them to the parties that ought
to receive them.

I'm actually a bit surprised that this hasn't caused more visible trouble.
If a down event went to wireguard-go but the subsequent up event
went to userspace.go, we could end up with the wireguard-go device disappearing.

I believe that this may also (somewhat accidentally) be a fix for #1790.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2021-04-26 17:16:51 -07:00
David Anderson
97d2fa2f56 net/dns: work around WSL DNS implementation flaws.
Fixes tailscale/corp#1662

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-26 16:54:50 -07:00
Avery Pennarun
a92b9647c5 wgengine/bench: speed test for channels, sockets, and wireguard-go.
This tries to generate traffic at a rate that will saturate the
receiver, without overdoing it, even in the event of packet loss. It's
unrealistically more aggressive than TCP (which will back off quickly
in case of packet loss) but less silly than a blind test that just
generates packets as fast as it can (which can cause all the CPU to be
absorbed by the transmitter, giving an incorrect impression of how much
capacity the total system has).

Initial indications are that a syscall about every 10 packets (TCP bulk
delivery) is roughly the same speed as sending every packet through a
channel. A syscall per packet is about 5x-10x slower than that.

The whole tailscale wireguard-go + magicsock + packet filter
combination is about 4x slower again, which is better than I thought
we'd do, but probably has room for improvement.

Note that in "full" tailscale, there is also a tundev read/write for
every packet, effectively doubling the syscall overhead per packet.

Given these numbers, it seems like read/write syscalls are only 25-40%
of the total CPU time used in tailscale proper, so we do have
significant non-syscall optimization work to do too.

Sample output:

$ GOMAXPROCS=2 go test -bench . -benchtime 5s ./cmd/tailbench
goos: linux
goarch: amd64
pkg: tailscale.com/cmd/tailbench
cpu: Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz
BenchmarkTrivialNoAlloc/32-2         	56340248	        93.85 ns/op	 340.98 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTrivialNoAlloc/124-2        	57527490	        99.27 ns/op	1249.10 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTrivialNoAlloc/1024-2       	52537773	       111.3 ns/op	9200.39 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTrivial/32-2                	41878063	       135.6 ns/op	 236.04 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTrivial/124-2               	41270439	       138.4 ns/op	 896.02 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTrivial/1024-2              	36337252	       154.3 ns/op	6635.30 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkBlockingChannel/32-2           12171654	       494.3 ns/op	  64.74 MB/s	         0 %lost	    1791 B/op	       0 allocs/op
BenchmarkBlockingChannel/124-2          12149956	       507.8 ns/op	 244.17 MB/s	         0 %lost	    1792 B/op	       1 allocs/op
BenchmarkBlockingChannel/1024-2         11034754	       528.8 ns/op	1936.42 MB/s	         0 %lost	    1792 B/op	       1 allocs/op
BenchmarkNonlockingChannel/32-2          8960622	      2195 ns/op	  14.58 MB/s	         8.825 %lost	    1792 B/op	       1 allocs/op
BenchmarkNonlockingChannel/124-2         3014614	      2224 ns/op	  55.75 MB/s	        11.18 %lost	    1792 B/op	       1 allocs/op
BenchmarkNonlockingChannel/1024-2        3234915	      1688 ns/op	 606.53 MB/s	         3.765 %lost	    1792 B/op	       1 allocs/op
BenchmarkDoubleChannel/32-2          	 8457559	       764.1 ns/op	  41.88 MB/s	         5.945 %lost	    1792 B/op	       1 allocs/op
BenchmarkDoubleChannel/124-2         	 5497726	      1030 ns/op	 120.38 MB/s	        12.14 %lost	    1792 B/op	       1 allocs/op
BenchmarkDoubleChannel/1024-2        	 7985656	      1360 ns/op	 752.86 MB/s	        13.57 %lost	    1792 B/op	       1 allocs/op
BenchmarkUDP/32-2                    	 1652134	      3695 ns/op	   8.66 MB/s	         0 %lost	     176 B/op	       3 allocs/op
BenchmarkUDP/124-2                   	 1621024	      3765 ns/op	  32.94 MB/s	         0 %lost	     176 B/op	       3 allocs/op
BenchmarkUDP/1024-2                  	 1553750	      3825 ns/op	 267.72 MB/s	         0 %lost	     176 B/op	       3 allocs/op
BenchmarkTCP/32-2                    	11056336	       503.2 ns/op	  63.60 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTCP/124-2                   	11074869	       533.7 ns/op	 232.32 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkTCP/1024-2                  	 8934968	       671.4 ns/op	1525.20 MB/s	         0 %lost	       0 B/op	       0 allocs/op
BenchmarkWireGuardTest/32-2          	 1403702	      4547 ns/op	   7.04 MB/s	        14.37 %lost	     467 B/op	       3 allocs/op
BenchmarkWireGuardTest/124-2         	  780645	      7927 ns/op	  15.64 MB/s	         1.537 %lost	     420 B/op	       3 allocs/op
BenchmarkWireGuardTest/1024-2        	  512671	     11791 ns/op	  86.85 MB/s	         0.5206 %lost	     411 B/op	       3 allocs/op
PASS
ok  	tailscale.com/wgengine/bench	195.724s

Updates #414.

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2021-04-26 03:51:13 -04:00
David Anderson
f6b7d08aea net/dns: work around new NetworkManager in other selection paths.
Further bits of #1788

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-23 22:09:00 -07:00
David Anderson
25ce9885a2 net/dns: don't use NM+resolved for NM >=1.26.6.
NetworkManager fixed the bug that forced us to use NetworkManager
if it's programming systemd-resolved, and in the same release also
made NetworkManager ignore DNS settings provided for unmanaged
interfaces... Which breaks what we used to do. So, with versions
1.26.6 and above, we MUST NOT use NetworkManager to indirectly
program systemd-resolved, but thankfully we can talk to resolved
directly and get the right outcome.

Fixes #1788

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-23 21:13:19 -07:00
Brad Fitzpatrick
e41075dd4a net/interfaces: work around race fetching routing table
Fixes #1345
Updates golang/go#45736

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-23 13:23:19 -07:00
David Anderson
30f5d706a1 net/dns/resolver: remove unnecessary/racy WaitGroup.
Fixes #1663

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-22 19:17:37 -07:00
David Anderson
89c81c26c5 net/dns: fix resolved match domains when no nameservers are provided.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 17:10:39 -07:00
David Anderson
4be26b269f net/dns: correctly capture all traffic in non-split configs.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 16:57:46 -07:00
David Anderson
ca283ac899 net/dns: remove config in openresolv when given an empty DNS config.
Part of #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 16:19:34 -07:00
David Anderson
53213114ec net/dns: make debian_resolvconf correctly clear DNS configs.
More of #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:51:14 -07:00
David Anderson
3b1ab78954 net/dns: restore resolv.conf when given an empty config in directManager.
Fixes #1720.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 15:14:40 -07:00
David Anderson
158328ba24 net/dns: remove ForceSplitDNSForTesting.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-20 12:50:08 -07:00
Naman Sood
71b7e48547
net/tsaddr: expand ephemeral nodes range to /64
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-19 15:54:53 -04:00
Naman Sood
b85d80b37f
net/tsaddr: add new IP range for ephemeral nodes in Tailscale ULA (#1715)
Signed-off-by: Naman Sood <mail@nsood.in>
2021-04-16 14:47:55 -04:00
David Anderson
bb0710d51d net/dns: add debugging traces to DNS manager selection on linux.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:52:41 -07:00
David Anderson
4b70c7b717 net/dns: fix inverted test for NetworkManager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:52:22 -07:00
David Anderson
4849a4d3c8 net/dns: error out on linux if /etc/resolv.conf can't be read.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:35:32 -07:00
David Anderson
1f9b73a531 net/dns: fix freebsd DNS manager selection.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-14 15:34:59 -07:00
AdamKorcz
2243bb48c2 stun fuzzer: Small fix
Signed-off-by: AdamKorcz <adam@adalogics.com>
2021-04-14 08:17:46 -07:00
Brad Fitzpatrick
c2ca2ac8c4 net/dns: fix FreeBSD build
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-13 17:38:17 -07:00
David Anderson
84bd50329a net/dns: fix staticheck.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:28:37 -07:00
David Anderson
d6bb11b5bf net/dns: implement correct manager detection on linux.
Part of #953.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
David Anderson
9ef932517b net/dns: fix NM's GetBaseConfig when no configs exist.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
David Anderson
fe3b1ab747 net/dns: refactor dbus connection setup in resolved manager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-13 17:19:00 -07:00
David Anderson
854d5d36a1 net/dns: return error from NewOSManager, use it to initialize NM.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-12 15:51:37 -07:00
David Anderson
9aa33b43e6 net/dns: support split and unsplit DNS in NetworkManager.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-12 14:34:08 -07:00
David Anderson
87eb8384f5 net/dns: fix up NetworkManager configurator a bit.
Clear LLMNR and mdns flags, update reasoning for our settings,
and set our override priority harder than before when we want
to be primary resolver.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 23:19:50 -07:00
David Anderson
3d81e6260b net/dns: set resolved DefaultRoute setting according to split-dns mode.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 20:53:28 -07:00
David Anderson
cca230cc23 net/dns: fix staticcheck errors.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 20:53:28 -07:00
Brad Fitzpatrick
4b47393e0c net/dns: pacify staticcheck for now
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-04-11 20:43:15 -07:00
David Anderson
a7340c2015 net/dns: support split DNS in systemd-resolved.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 18:14:23 -07:00
David Anderson
84430cdfa1 net/dns: improve NetworkManager detection, using more DBus.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-11 15:22:06 -07:00
David Anderson
9a48bac8ad net/dns: rename resolvconf.go to debian_resolvconf.go.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 23:31:14 -07:00
David Anderson
9831f1b183 net/dns: also include 'tail' and 'base' files when fixing up resolv.conf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 23:01:11 -07:00
David Anderson
e43afe9140 net/dns: implement prior config reading for debian resolvconf.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 22:37:13 -07:00
David Anderson
143e5dd087 net/dns: rename script variable.
Debian resolvconf is not legacy, it's alive and well,
just historically before the other implementations.

Signed-off-by: David Anderson <danderson@tailscale.com>
2021-04-10 21:28:27 -07:00