mayhem-firmware

Do not pack the PortaPack with heavy or blunt objects. The LCD display is easy to crush, scratched and damaged. The touch screen glass is not smartphone glass, and is therefore a lot more fragile.
Keep the unit away from water and dont keep in a damp enviroment.
The RF input to the antenna is very sensitive to RF level. Do not overload or place in an environment that has high RF levels otherwise the front end amplifier will be damaged, this has happenend to a lot of people.
If transmitting make sure you have an Antenna or RF load conected to the Antenna connection of nominal 50 Ohms and has a VSWR less than 2:1.
Do not overtighten RF cables to the HackRF SMA connectors. If you tighten too much, the SMA connector can snap off the HackRF board.
Disconnect all cables and connectors before storing your PortaPack. Sideways force on plugs can loosen and damage PortaPack and HackRF connectors.
Do not change antennas with your HackRF powered up.

How to collaborate
How to ask questions correctly

User manual

First steps
- About firmwares
- Redirections on this manual/project
Usage cautions
Intended use and Legality
Features
PortaPack Versions (which one to buy)
HackRF Versions
- Original GSG HackRF One
- Clifford's-version
Firmware update procedure
- Updating the Xilinx CPLD on hackrf board
Description of the hardware
- Enclosure/cases
  - 3d printed enclosure
- Internal speaker
- SMD buttons and caps
- Encoder knob
- SMA Antenna connector
User interface
Powering the PortaPack
Troubleshooting
Applications
- Receivers
  - ADS-B
  - AFSK
  - AIS Boats
  - Analog TV
  - APRS
  - Audio
  - BLE RX
  - ERT Meter
  - Level
  - NRF
  - POCSAG
  - Radiosonde
  - Recon
  - Search
  - TPMS Cars
  - Weather/SubGhzD
  - Fox-Hunt
  - ProtoView
- Transmitters
  - ADS-B(S)
  - APRS
  - BHT Xy/EP
  - BLE TX
  - Burger Pager
  - GPS Sim
  - Jammer
  - LGE Tool
  - Morse
  - OOK
  - OOK Editor
  - POCSAG
  - RDS
  - Soundboard
  - Spectrum Painter
  - SSTV
  - TEDI/LCR
  - TouchTunes
  - BLESpam
- Capture
  - C16 Format
- Replay
- Remote
- Scanner
- Microphone Transceiver
- Looking Glass
- Utilities
- Settings
  - App Settings
  - Audio
  - Blacklist
  - Calibration
  - Touchscreen Threshold
  - Config Mode
  - Converter
  - Date/time
  - Encoder Dial
  - Freq. Correct
  - P.Mem Mgmt
  - QR code
  - Radio
  - User Interface
  - Brightness
  - Menu Color
- Debug
- HackRF Mode
- USB Serial Console

Developer Manual

Compilation of the firmware
Create a custom map
Code formatting
PR process
Description of the Structure
Software Dev Guides
- Code contribution rules
- Create a Simple App
- Building External Apps
- Widgets
- SD Card
- Access Radio Hardware
- Interpret Guru meditation crashes
- Create a Complex App
- Theme-system
- Debug via SWD & JTAG
- Debug with serial
- I2C drivers
Tools
Research
- Dissecting the Temperature Logger
- Differences between H1 and H2
UI Screenshots
Maintaining
- Creating a prod/stable release (Maintainers only)
- Maintaining rules
Development States Notes

Note

The wiki is incomplete. Please add content and collaborate.

Important

This is a public wiki. Everything is visible to everyone. Don't use it for personal notes.

Avoid linking to external tutorials/articles; they may become outdated or contain false information.