1 Updating the Xilinx CPLD on hackrf board

sommermoregentraum edited this page 2024-01-12 22:51:47 +08:00

You can update the CPLD manually:

First get the original HackRF project into your computer:

git clone https://github.com/greatscottgadgets/hackrf

Then, connect your portapack into your machine, put it into HackRF mode and use the following command in order to update the CPLD:

hackrf_cpldjtag -x hackrf/firmware/cpld/sgpio_if/default.xsvf

LED1/2/3 blinking means CPLD program success. LED3/RED steady means error. Wait for the message 'Write finished' and power OFF / Disconnect your portapack from your machine.

Start here

How to collaborate
How to ask questions correctly

User manual

• First steps
  • About firmwares
  • Redirections on this manual/project
• Usage cautions
• Intended use and Legality
• Features
• PortaPack Versions (which one to buy)
• HackRF Versions
  • Original GSG HackRF One
  • Clifford's-version
• Firmware update procedure
  • Updating the Xilinx CPLD on hackrf board
• Description of the hardware
  • Enclosure/cases
    • 3d printed enclosure
  • Internal speaker
  • SMD buttons and caps
  • Encoder knob
  • SMA Antenna connector
• User interface
  • Splash screen
  • Title bar
  • Main menu
  • Main Controls
  • SD Card content and modification
  • Text Entry
• Powering the PortaPack
• Troubleshooting
  • Won't boot
  • Config Menu
  • Firmware upgrade
  • Diagnose firmware update in Windows
  • Receive Quality Issues
  • No TX/RX
  • TX Carrier Only
  • H2+ speaker modifications
  • Dead Coin Cell Battery
  • Factory Defaults
  • SD card not recognized by PC with the SD-card over USB selected
  • DFU overlay
  • Full reset
  • SolveBoard
• Applications
  • Receivers
    • ADS-B
    • AFSK
    • AIS Boats
    • Analog TV
    • APRS
    • Audio
    • BLE RX
    • ERT Meter
    • Level
    • NRF
    • POCSAG
    • Radiosonde
    • Recon
    • Search
    • TPMS Cars
    • Weather/SubGhzD
    • Fox-Hunt
    • ProtoView
  • Transmitters
    • ADS-B(S)
    • APRS
    • BHT Xy/EP
    • BLE TX
    • Burger Pager
    • GPS Sim
    • Jammer
    • LGE Tool
    • Morse
    • OOK
    • OOK Editor
    • POCSAG
    • RDS
    • Soundboard
    • Spectrum Painter
    • SSTV
    • TEDI/LCR
    • TouchTunes
    • BLESpam
  • Capture
    • C16 Format
  • Replay
  • Remote
  • Scanner
  • Microphone Transceiver
  • Looking Glass
  • Utilities
    • Antenna length
    • File manager
    • Freq manager
    • Notepad
    • IQ Trim
    • SD over USB
    • Signal gen
    • Wav Viewer
    • Flash Utility
    • Wipe SD card
    • Pac-Man
    • WardriveMap
    • Random password
  • Settings
    • App Settings
    • Audio
    • Blacklist
    • Calibration
    • Touchscreen Threshold
    • Config Mode
    • Converter
    • Date/time
    • Encoder Dial
    • Freq. Correct
    • P.Mem Mgmt
    • QR code
    • Radio
    • User Interface
    • Brightness
    • Menu Color
  • Debug
    • Memory Usage
    • SD Card
    • Peripherals
    • Temperature
    • Buttons Test
    • Touch Test
    • P.Memory
    • Debug Dump
    • M0 Stack Dump
    • Fonts Viewer
    • Audio Test
  • HackRF Mode
  • USB Serial Console

Developer Manual

• Compilation of the firmware
  • Compile on WSL with ninja
  • How to compile on Windows faster with WSL 2
  • Using Docker and Kitematic
  • Docker command-line reference
  • Using Buddyworks and other CI platforms
  • Notes for Buddy.Works (and other CI platforms)
  • Using ARM on Debian host
  • All in one script for ARM on Debian host
  • Compile on Arch based distro (exclude Asahi)
  • Dev build versions
  • Notes About ccache
• Create a custom map
• Code formatting
• PR process
• Description of the Structure
  • At First Glance
  • Boot Process
  • Firmware Architecture
  • Persistent Memory
  • ChibiOS Notes
• Software Dev Guides
  • Code contribution rules
  • Create a Simple App
  • Building External Apps
  • Widgets
  • SD Card
  • Access Radio Hardware
  • Interpret Guru meditation crashes
  • Create a Complex App
  • Theme-system
  • Debug via SWD & JTAG
  • Debug with serial
  • I2C drivers
• Tools
  • make_airlines_db.py
  • make_icao24_db.py
  • world_map.bin
  • converter
  • Bitmap reverse decode
• Research
  • Dissecting the Temperature Logger
  • Differences between H1 and H2
• UI Screenshots
• Maintaining
  • Creating a prod/stable release (Maintainers only)
  • Maintaining rules
• Development States Notes
  • Work Needed (Future Enhancement Suggestions)
  • External App Roadmap
  • SD card

Note

The wiki is incomplete. Please add content and collaborate.

Important

• This is a public wiki. Everything is visible to everyone. Don't use it for personal notes.
• Avoid linking to external tutorials/articles; they may become outdated or contain false information.