This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We were inconsistent whether we checked if the feature was already
enabled which we could do cheaply using the locally available status.
We would do the checks fine if we were turning on funnel, but not serve.
This moves the cap checks down into enableFeatureInteractive so that
are always run.
Updates #9984
Co-authored-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We prevent shodow configs when starting a foreground when a background serve config already exists for the serve type and port. This PR improves the messaging to let the user know how to remove the previous config.
Updates #8489
ENG-2314
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
The `--http` flag can not be used with Funnel, so we should remove it to remove confusion.
Updates #8489
ENG-2316
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR changes the -https, -http, -tcp, and -tls-terminated-tcp
flags from string to int and also updates the validation to ensure
they fit the uint16 size as the flag library does not have a Uint16Var
method.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The TestServeDevConfigMutations test has 63 steps that all run
under the same scope. This tests breaks them out into isolated
subtests that can be run independently.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We currently print out "run tailscale serve --help" when the subcmd
might be funnel. This PR ensures the right subcmd is passed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A few people have run into issues with understanding why `--set-path` started in background mode, and/or why they couldn't use a path in foreground mode. This change allows `--set-path` to be used in either case (foreground or background).
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* Fixes issue with template string not being provided in help text
* Updates background information to provide full URL, including path, to make it clear the source and destination
* Restores some tests
* Removes AllowFunnel in ServeConfig if no proxy exists for that port.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds the same set-raw from the old flow into the new one
so that users can continue to use it when transitioning into the new
flow.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR fixes the isLegacyInvocation to better catch serve and
funnel legacy commands. In addition, it now also returns a string
that translates the old command into the new one so that users
can have an easier transition story.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR allows you to do "tailscale serve -bg -https:4545 off" and it
will delete all handlers under it. It will also prompt you for a y/n in case
you wanted to delete a single port.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Users should delete proxies by deleting or modifying the k8s cluster resources
that they used to tell the operator to create they proxy. With this flow,
the tailscale operator will delete the associated device from the control.
However, in some cases users might have already deleted the device from the control manually.
Updates tailscale/tailscale#9773
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We no longer build Windows releases with cgo enabled, which
automatically turned off certstore support. Rather than re-enabling cgo,
we updated our fork of the certstore package to no longer require cgo.
This updates the package, cleans up how the feature is configured, and
removes the cgo build tag requirement.
Fixestailscale/corp#14797Fixestailscale/coral#118
Change-Id: Iaea34340761c0431d759370532c16a48c0913374
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
In the sandboxed app from the app store, we cannot check
`/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`.
We can at most print a helpful message and open the app store page.
Also, reenable macsys update function to mark it as supporting c2n
updates. macsys support in `tailscale update` was fixed.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The progress printer was buggy where it would not print correctly
and some of the truncation logic was faulty.
The progress printer now prints something like:
go1.21.3.linux-amd64.tar.gz 21.53MiB 13.83MiB/s 33.88% ETA 00:00:03
where it shows
* the number of bytes transferred so far
* the rate of bytes transferred
(using a 1-second half-life for an exponentially weighted average)
* the progress made as a percentage
* the estimated time
(as calculated from the rate of bytes transferred)
Other changes:
* It now correctly prints the progress for very small files
* It prints at a faster rate (4Hz instead of 1Hz)
* It uses IEC units for byte quantities
(to avoid ambiguities of "kb" being kilobits or kilobytes)
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The `serve` command for TCP has always required the scheme of the target to be specified. However, when it's omitted the error message reported is misleading
```
error: failed to apply TCP serve: invalid TCP target "localhost:5900": missing port in address
```
Since we know the target is TCP, we shouldn't require it to be specified. This aligns with the changes for HTTP proxies in https://github.com/tailscale/tailscale/issues/8489closes#9855
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
The `off` subcommand removes a serve/funnel for the corresponding type and port. Previously, we were not providing this which would result in an error if someone was using something than the default https=443.
closes#9858
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
It's required as of the recent 5297bd2cff.
Updates #7894
Updates #9394 (sure would be nice)
Change-Id: Id6672408dd8a6c82dba71022c8763e589d789fcd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/k8s-operator: users can configure operator to set firewall mode for proxies
Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode
Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service.
Updates tailscale/tailscale#9310
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The change is being kept to a minimum to make a revert easy if necessary. After the release, we will go back for a final cleanup.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Previously we were just smushing together args and not trying
to parse the values at all. This resulted in the args to testwrapper
being limited and confusing.
This makes it so that testwrapper parses flags in the exact format as `go test`
command and passes them down in the provided order. It uses tesing.Init to
register flags that `go test` understands, however those are not the only
flags understood by `go test` (such as `-exec`) so we register these separately.
Updates tailscale/corp#14975
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This partially reverts commits a61a9ab087
and 7538f38671 and fully reverts
4823a7e591.
The goal of that commit was to reapply known config whenever the
container restarts. However, that already happens when TS_AUTH_ONCE was
false (the default back then). So we only had to selectively reapply the
config if TS_AUTH_ONCE is true, this does exactly that.
This is a little sad that we have to revert to `tailscale up`, but it
fixes the backwards incompatibility problem.
Updates tailscale/tailscale#9539
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change:
* adds a partial files peerAPI endpoint to get a list of partial files
* adds a helper function to extract the basename of a file
* updates the peer put peerAPI endpoint
* updates the file put localapi endpoint to allow resume functionality
Updates #14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
We were too strict and required the user not specify the host field at all
in the ingress rules, but that degrades compatibility with existing helm charts.
Relax the constraint so that rule.Host can either be empty, or match the tls.Host[0]
value exactly.
Fixes#9548
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Replace the deprecated var with the one in docs to avoid confusion.
Introduced in 335a5aaf9a.
Updates #8317Fixes#9764
Signed-off-by: Maisem Ali <maisem@tailscale.com>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.
Fixes#9756
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This migrates containerboot to reuse the NetfilterRunner used
by tailscaled instead of manipulating iptables rule itself.
This has the added advantage of now working with nftables and
we can potentially drop the `iptables` command from the container
image in the future.
Updates #9310
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is only relevant for unstable releases and local builds. When local
version is newer than upstream, abort release.
Also, re-add missing newlines in output that were missed in
https://github.com/tailscale/tailscale/pull/9694.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit adds support for getting serial numbers from SMBIOS
on Windows/Linux (and BSD) using go-smbios.
Updates #5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
In case cli.Stdout/Stderr get overriden, all CLI output should use them
instead of os.Stdout/Stderr. Update the `update` command to follow this
pattern.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add available update message in "tailscale up" output. Also update the
message in "tailscale status" to match and mention auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Over time all taildrop functionality will be contained in the
taildrop package. This will include end to end unit tests. This is
simply the first smallest piece to move over.
There is no functionality change in this commit.
Updates tailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Co-authored-by: Joseph Tsai <joetsai@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
We had a misstep with the semantics when applying an optimization that
showed up in the roll into corp. This test ensures that case and related
cases must be retained.
Updates #9410
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit ee90cd02fd.
The outcome is not identical for empty slices. Cloner really needs
tests!
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
1.50.0 switched containerboot from using `tailscale up`
to `tailscale login`. A side-effect is that a re-usable
authkey is now re-applied on every boot by `tailscale login`,
where `tailscale up` would ignore an authkey if already
authenticated.
Though this looks like it is changing the default, in reality
it is setting the default to match what 1.48 and all
prior releases actually implemented.
Fixes https://github.com/tailscale/tailscale/issues/9539
Fixes https://github.com/tailscale/corp/issues/14953
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
These were missed when adding NodeCapMap and resulted
in tsnet binaries not being able to turn on funnel.
Fixes#9566
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update github.com/go-json-experiment/json to the latest version
and fix the build in light of some breaking API changes.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The test was sending SIGKILL to containerboot, which results in no
signal propagation down to the bash script that is running as a child
process, thus it leaks.
Minor changes to the test daemon script, so that it cleans up the socket
that it creates on exit, and spawns fewer processes.
Fixestailscale/corp#14833
Signed-off-by: James Tucker <james@tailscale.com>
In typical k8s setups, the MTU configured on the eth0 interfaces is typically 1500 which
results in packets being dropped when they make it to proxy pods as the tailscale0 interface
has a 1280 MTU.
As the primary use of this functionality is TCP, add iptables based MSS clamping to allow
connectivity.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR fixes a bug to make sure that we don't allow two configs
exist with duplicate ports
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The kube-apiserver proxy in the operator would only run in
auth proxy mode but thats not always desirable. There are
situations where the proxy should just be a transparent
proxy and not inject auth headers, so do that using a new
env var APISERVER_PROXY and deprecate the AUTH_PROXY env.
THe new env var has three options `false`, `true` and `noauth`.
Updates #8317
Signed-off-by: Maisem Ali <maisem@tailscale.com>
tailcfg.Node zero-value clone equality checks failed when I added a
[]*foo to the structure, as the zero value and it's clone contained a
different slice header.
Updates #9377
Updates #9408
Signed-off-by: James Tucker <james@tailscale.com>
This PR adds validations for the new new funnel/serve
commands under the following rules:
1. There is always a single config for one port (bg or fg).
2. Foreground configs under the same port cannot co-exists (for now).
3. Background configs can change as long as the serve type is the same.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR uses the etag/if-match pattern to ensure multiple calls
to SetServeConfig are synchronized. It currently errors out and
asks the user to retry but we can add occ retries as a follow up.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It became required as of 6e967446e4
Updates #8052
Change-Id: I08d100534254865293c1beca5beff8e529e4e9ac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
General cleanup and additional test coverage of WIP code.
* use enum for serveType
* combine instances of ServeConfig access within unset
* cleanMountPoint rewritten into cleanURLPath as it only handles URL paths
* refactor and test expandProxyTargetDev
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
I missed this in 343c0f1031 and I guess we don't have integration
tests for wasm. But it compiled! :)
Updates #fixup to a #cleanup
Change-Id: If147b90bab254d144ec851a392e8db10ab97f98e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sometimes `go test` would exit and close its stdout before we started reading
it, and we would return that "file closed" error then forget to os.Exit(1).
Fixed to prefer the go test subprocess error and exit regardless of the type of
error.
Fixes#9334
Signed-off-by: Paul Scott <paul@tailscale.com>
If the user's running "go test" by hand, no need to spam stderr with
the sentinel marker. It already calls t.Logf (which only gets output
on actual failure, or verbose mode) which is enough to tell users it's
known flaky. Stderr OTOH always prints out and is distracting to
manual "go test" users.
Updates #cleanup
Change-Id: Ie5e6881bae291787c30f75924fa132f4a28abbb2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR ensures calls to the LocalBackend are not happening
multiples times and ensures the set/unset methods are
only manipulating the serve config
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, foreground mode only worked in the simple case of `tailscale funnel <port>`.
This PR ensures that whatever you can do in the background can also be
done in the foreground such as setting mount paths or tcp forwarding.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
> **Note**
> Behind the `TAILSCALE_FUNNEL_DEV` flag
* Expose additional listeners through flags
* Add a --bg flag to run in the background
* --set-path to set a path for a specific target (assumes running in background)
See the parent issue for more context.
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We use it a number of places in different repos. Might as well make
one. Another use is coming.
Updates #cleanup
Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Our BETA serve help text is long and often hides the actual error
in the user's usage. Instead of printing the full text, prompt
users to use `serve --help` if they want the help info.
Fixes#14274
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
It would just fail the entire pkg, but would not print any
logs. It was already tracking all the logs, so have it emit
them when the pkg fails/times out.
Updates #9231
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We already had a path on the web client server struct, but hadn't
plumbed it through to the CLI. Add that now and use it for Synology and
QNAP instead of hard-coding the path. (Adding flag for QNAP is
tailscale/tailscale-qpkg#112) This will allow supporting other
environments (like unraid) without additional changes to the client/web
package.
Also fix a small bug in unraid handling to only include the csrf token
on POST requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
I noticed that failed tests were leaving aroudn stray tailscaled processes
on macOS at least.
To repro, add this to tstest/integration:
func TestFailInFewSeconds(t *testing.T) {
t.Parallel()
time.Sleep(3 * time.Second)
os.Exit(1)
t.Fatal("boom")
}
Those three seconds let the other parallel tests (with all their
tailscaled child processes) start up and start running their tests,
but then we violently os.Exit(1) the test driver and all the children
were kept alive (and were spinning away, using all available CPU in
gvisor scheduler code, which is a separate scary issue)
Updates #cleanup
Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Port 8080 is routinely used for HTTP services, make it easier to
use --forwards=tcp/8080/... by moving the metrics port out of the
way.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
While investigating the fix in 7538f38671,
I was curious why the testwrapper didn't fail. Turns out if the test
times out and there was no explicit failure, the only message we get
is that the overall pkg failed and no failure information about the
individual test. This resulted in a 0 exit code.
This fixes that by failing the explicit case of the pkg failing when
there is nothing to retry for that pkg.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.
Updates tailscale/corp#13777
Signed-off-by: David Anderson <danderson@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This option allows logging the raw HTTP requests and responses that the
portmapper Client makes when using UPnP. This can be extremely helpful
when debugging strange UPnP issues with users' devices, and might allow
us to avoid having to instruct users to perform a packet capture.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4
On k8s the serve-config secret mount is symlinked so checking against
the Name makes us miss the events.
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously, the operator would only monitor Services and create
a Tailscale StatefulSet which acted as a L3 proxy which proxied
traffic inbound to the Tailscale IP onto the services ClusterIP.
This extends that functionality to also monitor Ingress resources
where the `ingressClassName=tailscale` and similarly creates a
Tailscale StatefulSet, acting as a L7 proxy instead.
Users can override the desired hostname by setting:
```
- tls
hosts:
- "foo"
```
Hostnames specified under `rules` are ignored as we only create a single
host. This is emitted as an event for users to see.
Fixes#7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This watches the provided path for a JSON encoded ipn.ServeConfig.
Everytime the file changes, or the nodes FQDN changes it reapplies
the ServeConfig.
At boot time, it nils out any previous ServeConfig just like tsnet does.
As the ServeConfig requires pre-existing knowledge of the nodes FQDN to do
SNI matching, it introduces a special `${TS_CERT_DOMAIN}` value in the JSON
file which is replaced with the known CertDomain before it is applied.
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously users would have to unexpose/expose the service in order to
change Hostname/TargetIP. This now applies those changes by causing a
StatefulSet rollout now that a61a9ab087 is in.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1. Add TCP port forwarding.
For example: ./sniproxy -forwards=tcp/22/github.com
will forward SSH to github.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@github.com
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@100.65.x.y
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
2. Additionally export clientmetrics as prometheus metrics for local
scraping over the tailnet: http://sniproxy-hostname:8080/debug/varz
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a cached self node to the web client Server struct, which will
be used from the web client api to verify that request came from the
node's own machine (i.e. came from the web client frontend). We'll
be using when we switch the web client api over to acting as a proxy
to the localapi, to protect against DNS rebinding attacks.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add `dist.Signer` hook which can arbitrarily sign linux/synology
artifacts. Plumb it through in `cmd/dist` and remove existing tarball
signing key. Distsign signing will happen on a remote machine, not using
a local key.
Updates #755
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously we would not reapply changes to TS_HOSTNAME etc when
then the container restarted and TS_AUTH_ONCE was enabled.
This splits those into two steps login and set, allowing us to
only rerun the set step on restarts.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The Windows Security Center is a component that manages the registration of
security products on a Windows system. Only products that have obtained a
special cert from Microsoft may register themselves using the WSC API.
Practically speaking, most vendors do in fact sign up for the program as it
enhances their legitimacy.
From our perspective, this is useful because it gives us a high-signal
source of information to query for the security products installed on the
system. I've tied this query into the osdiag package and is run during
bugreports.
It uses COM bindings that were automatically generated by my prototype
metadata processor, however that program still has a few bugs, so I had
to make a few manual tweaks. I dropped those binding into an internal
package because (for the moment, at least) they are effectively
purpose-built for the osdiag use case.
We also update the wingoes dependency to pick up BSTR.
Fixes#10646
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Indicate to the web client when it is running in CGI mode, and if it is
then cache the csrf key between requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Can write "wasm" instead of js || wasi1p, since there's only two:
$ go tool dist list | grep wasm
js/wasm
wasip1/wasm
Plus, if GOOS=wasip2 is added later, we're already set.
Updates #5794
Change-Id: Ifcfb187c3775c17c9141bc721512dc4577ac4434
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have a fancy package for doing TLS cert validation even if the machine
doesn't have TLS certs (for LetsEncrypt only) but the CLI's netcheck command
wasn't using it.
Also, update the tlsdial's outdated package docs while here.
Updates #cleanup
Change-Id: I74b3cb645d07af4d8ae230fb39a60c809ec129ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR removes calls to ioutil library and replaces them
with their new locations in the io and os packages.
Fixes#9034
Updates #5210
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
I forgot to move the defer out of the func, so the tsnet.Server
immediately closed after starting.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was jumbled doing a lot of things, this breaks it up into
the svc reconciliation and the tailscale sts reconciliation.
Prep for future commit.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In order for the installer to restart the GUI correctly post-upgrade, we
need the GUI to be able to register its restart preferences.
This PR adds API support for doing so. I'm adding it to OSS so that it
is available should we need to do any such registrations on OSS binaries
in the future.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds csrf protection and hooks up an initial POST request from
the React web client.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make it just a views.Slice[netip.Prefix] instead of its own named type.
Having the special case led to circular dependencies in another WIP PR
of mine.
Updates #8948
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The tailscale serve|funnel commands frequently call the LocalBackend's Status
but they never need the peers to be included. This PR changes the call to be
StatusWithoutPeers which should gain a noticeable speed improvement
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Previously we would use the Impersonate-Group header to pass through
tags to the k8s api server. However, we would do nothing for non-tagged
nodes. Now that we have a way to specify these via peerCaps respect those
and send down groups for non-tagged nodes as well.
For tagged nodes, it defaults to sending down the tags as groups to retain
legacy behavior if there are no caps set. Otherwise, the tags are omitted.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
If a node is flapping or otherwise generating lots of STUN endpoints, we
can end up caching a ton of useless values and sending them to peers.
Instead, let's apply a fixed per-Addr limit of endpoints that we cache,
so that we're only sending peers up to the N most recent.
Updates tailscale/corp#13890
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8
When trying to use serve with https, send users through https cert
provisioning enablement before editing the ServeConfig.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
1. Add metrics to funnel flow.
2. Stop blocking users from turning off funnels when no longer in
their node capabilities.
3. Rename LocalClient.IncrementMetric to IncrementCounter to better
callout its usage is only for counter clientmetrics.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This removes the unsafe/linkname and only uses the standard library.
It's a bit slower, for now, but https://go.dev/cl/518336 should get us
back.
On darwin/arm64, without https://go.dev/cl/518336
pkg: tailscale.com/tstime/mono
│ before │ after │
│ sec/op │ sec/op vs base │
MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10)
TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10)
geomean 25.28n 27.89n +10.33%
And with it,
MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10)
TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10)
geomean 25.42n 25.52n +0.41%
Updates #8839
Updates tailscale/go#70
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Netcheck no longer performs I/O itself, instead it makes requests via
SendPacket and expects users to route reply traffic to
ReceiveSTUNPacket.
Netcheck gains a Standalone function that stands up sockets and
goroutines to implement I/O when used in a standalone fashion.
Magicsock now unconditionally routes STUN traffic to the netcheck.Client
that it hosts, and plumbs the send packet sink.
The CLI is updated to make use of the Standalone mode.
Fixes#8723
Signed-off-by: James Tucker <james@tailscale.com>
Currently just serving a "Hello world" page when running the web
cli in --dev mode.
Updates tailscale/corp#13775
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Extract the self-update logic from cmd/tailscale/cli into a standalone
package that could be used from tailscaled later.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
move the tailscale web client out of the cmd/tailscale/cli package, into
a new client/web package. The remaining cli/web.go file is still
responsible for parsing CLI flags and such, and then calls into
client/web. This will allow the web client to be hooked into from other
contexts (for example, from a tsnet server), and provide a dedicated
space to add more functionality to this client.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
